Engineer Equipment

ANTHONY TODD GIPSON

**** *** ****** ** *******, Texas 77027 C: 832-***-**** E: *******.******@*****.*** SUMMARY

Dedicated, diligent and dependable oil field professional, specializing in drilling fluids and petroleum operations. EDUCATION

Graduation Date

12/16/2016 B.S. Petroleum Engineering Management and Operations University of Houston Houston, TX/Online- 3.1 GPA

• Engineering Mathematics/ Reservoir Fluids/ Finite Mathematics 2401/ Calculus/ Financial Accounting/ Microeconomics & Macroeconomics/ Global Environmental of Business/ Organization Behavior & Management/ Engineering Statistics/Reservoir Petrophysics/ Petroleum Petrophysics/ Pressure Transient Testing Graduation Date

05/15/2015 Drilling Fluid Engineering Drilling Fluids Specialist/Drilling Fluid Properties Drilling Fluid Engineering Technology (DFE) Professional Mud School Tyler, Texas

• Fluid Theory and knowledge of field test and modifications of field drilling fluids. EXPERIENCE

2016 to 2016 Instrumentation Engineer

GE General Electric Power, Water & Process Technology Houston, Tx

• Perform daily testing checking NTU, Hardness, Chlorine, pH, CO2, O2, SDI, TOC, Na, Conductivity, Silica

• Fix pumps, check PH probes, calibrate PH probes-automated 3 ball valve filter, Desalter System, refuel the system with many agents as needed.

• Monitors, Configure and Services Operation Equipment ESP, Pason Monitors, SPS Equipment, NOV

• Monitor live feed of operations and provide follow-up with customers as needed

• Troubleshoot malfunctions, clean, lubricate, and adjust parts, equipment, and machinery.

• Build and construct proprietor GE equipment TrusSense Cooling Tower Unit, TruVessels, COMS Crude Overhead Monitoring System & XOS Chloride Monitoring System.

• Programming PID’s, loops, calculations. parameters, Control Panel, Hach Face,

• Report directly to regional engineers and operate under the general direction from Field Service Managers.

• Work with lock values, manifolds, filtration system, nitrogen gas lines, outlet-inlet lines, pressurized equipment, cables, read schematics and blueprints, digital switches, WHT-A4, GRN, 4-20mv, configure wireline cables, OMEGA Transducer,

• Also monitor Corrosion rate, ORP, Turbidity, Alkalinity, Make up PH and Make up ORP.

• Complete safety checks and report safety concerns

• Hold safety and environmental meeting with client personnel to proactively identify issues and lead the efforts to resolve them

2013 to 2015 Field Service Technician lll

Stage 3 Separation Oil & Gas Houston, Tx North America-Land Rigs

• Report directly to and assist on site mud engineers and operate under the general direction from Field Service Managers.

• Troubleshoot malfunctions, clean, lubricate, and adjust parts, equipment, and machinery.

• Monitor live feed of operations and provide follow-up with customers as needed

• Monitors and services operation equipment ESP, Pason Monitors, SPS Equipment, NOV Brandt Equipment, Schaumberg Equipment, centrifuges, bullet mix tanks, dryer shakers and dewatering drilling muds.

• Perform daily testing NTU, Hardness, Chlorine, pH, CO2, O2, SDI, TOC, Na, Conductivity, Silica

• Complete safety checks and report safety concerns

• Hold safety and environmental meeting with client personnel to proactively identify issues and lead the efforts to resolve them

• Maintaining and repairing the solids control process and monitoring of solids control equipment in an outdoor/indoor environment.

• Hands on with GE7F combustion turbines

• Perform control logic troubleshooting on Calpine gas turbines.

• Perform combustion tuning on mature Calpine gas turbines.

• Plan and execute installation activities for Gas Compression equipment

• Investigate and resolve customer reports of technical problems with equipment

• Eliminate future operational or service difficulties by performing preventative maintenance

• Diagnose and correct engine problems

• Perform testing of equipment in the field such as Positive Displacement Pumps, GormanRumper Pump or Centrifugal Pump or Gas Turbines and Hydraulic Systems.

• Monitor circulation data, review AES Material Consumption Sheet and Fluid Volume Accounting Sheet and handle MSDS documents.

• Responsible for collecting/recording operation data including Mud Retorts, Cost Log, JAS, Technical and Operations Reporting(Tech Opps). Working safely to maintain industry standards with no supervision.

2010-2012 Field Engineer

Mud Tech Services Houston, TX

• Monitor and operate on Well Control BOP Stack gauges and flow meters and inspect equipment to ensure that tank levels, temperatures, chemical amounts, and pressure levels are up to API standards.

• Read Hydraulic Schematics, Component codes such as S,K,G,R1,Rd

• Fix and monitor Hydro Nitrogen Accumulators and Gate Valves, Triplex and Duplex Pumps, BOP’s, Ram Preventer, Diverters, Annular Preventers, Casing Head, Shaffer, Hydril, Rod seals, Piston Seals, Wear rings, RAM, Flat Door, Door Seal, Cup tester.

• Configure, troubleshoot and program BOP Stacks, Wellheads, Electronic Boxes, Routers, cryptographic & Hydraulic equipment.

• Diagnose Cooper-Bessemer, Superior, Ajax, Penn, Dresser & Caterpillar gas turbines

• diagnosing and correcting engine problems, testing, checking, repairing and rebuilding Reciprocating Compression engines

• Monitor remote live-time data of operations rather Pason or Dynx and provide follow-up with customers as needed

• Run Pressure Test, Check Hydraulic Chamber, Hydraulic Control Fluid such as Koomey mixed with Ethylene Glycol.

• Tend to vessels that store substances such as gases, liquids, slurries, or powdered materials, checking levels of substances by using calibrated rods or by reading mercury gauges and tank charts.

• Assisted with dynamics system monitoring

• Plan movement of products through lines to processing, storage, and shipping units, using knowledge of interconnections and capacities of pipelines, valve manifolds, pumps, and tankage.

• While on-site, attend operations meeting with client personnel to proactively identify issues and lead the efforts to resolve them

• Report vehicle or equipment malfunctions.

• Work with PLCs and with instrumentation and controls.

• Work with Software packages RS Logix 5000, Siemen S7, GE Fanuc 90/30 & 90/70

• Record operational or production data.

• Collect samples for analysis or testing.

• Review work orders or schedules to determine operations or procedures. 2007-2009 Field Engineer

ICON ENERGY Provo, UT

• Monitor key and critical operation variables and other process data to ensure that the units are operating within design parameters

• Knowledge and experience on MK VI & MK VIe control systems

• Read Hydraulic Schematics, Component codes such as S,K,G,R1,Rd

• Troubleshoot, maintain, manage and upgrade existing electrical installation systems.

• Research and analyze causes of failures.

• Rotating machinery, pressure vessels, tanks, fired heaters, heat exchangers, utility equipment, material handling and solids processing systems.

• Loading arms, cranes, incinerators, water treatment, demin water, boilers, air dryers, chemical injection, desecrators, desalination plants, emergency generators, filters, flares.

• Heavy Duty Gas Turbine Controls & Instrumentation systems

• Run Pressure Test, Check Hydraulic Chamber, Hydraulic Control Fluid.

• Repair, replace and install new equipment components and related hardware to maximize function.

• Develop and implement control logic changes on mature gas and steam turbines.

• Mechanically assembly steam turbine generator and the MHC & EHC governor control functions.

• Vibration analysis and balancing of steam and gas turbine generators.

• Perform steam turbine generator operational inspections (ISI), operational and controls troubleshooting & calibration, and unit mechanical overhauls

• ADRE vibration analysis equipment & temporary probe augmentation and TurboNet DASH 1 control system for installation & commissioning support and troubleshooting opportunities.

• Troubleshooting other control systems such as Woodward, GE Mark I - VI and MHC Flyball

• Governors and well versed in the operation and wiring schemes of the subsystem equipment and motor starters.

• Perform control logic troubleshooting on gas turbines.

• Perform combustion tuning on mature gas turbines.

• Ensure piping and tubing are installed and commissioned correctly.

• Perform alignments on machines and motors and perform flushes as needed.

• Repair and rebuild Compression engines

• Troubleshoot malfunctions, clean, lubricate, and adjust parts, equipment, and machinery.

• Disassemble machinery and equipment to remove parts and make repairs.

• Examine parts for defects such as breakage and excessive wear.

• Locate sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments.

• Demonstrate equipment functions and features to machine operators. Provide mechanical maintenance information by answering questions and requests.

• Read Schematics & Blueprint reading national electric code requirements; hi-voltage electrical equipment; use of electrical equipment including V.O.M., AMP meter, 1000 volt insulation tester

HIGHLIGHTS

SKILLS LICENSES

Drilling Fluids Certification Passport Microsoft Excel PowerPoint Windows Mac OSX IADC Rig Pass ® Certification Transportation Worker Identification Credential Card ® #11959096 WorKeys® Career Readiness Certificate HAZ MAT Certification Basic Oilfield Mathematics Certificate Crane Safety Certificate

Kick Detection Certificate Well Control Fundamentals Certificate Introduction to Petroleum Industry Certificate of completion Longshoreman/ILA 24 W.G.M.A Waterfront# 147880/Bulk Heavy Cargo. References

Oil & Water Base Drilling Fluids HTHP/MBT/Rheology/API Filter Testing Oil & Water Mud Calculations MDR/MBR Oil & Water Base Calculations Equipment Troubleshooting/Problem Solving Oracle EBS Database Oil & Water Base Products/Additive & Functions P2ES System Alkalinities & Titrations SQL Syntax

Mud Check/Retorts/MOC’S Well Geometry

Michael Rowden Engineer Consultant PFE SERVICES 903-***-**** Chris Arce Drilling Fluid Consultant EOG RESOURCES 830-***-**** Antonio Datcher Company Man SAUDI ARAMCO 251-***-**** Michelle Rowden Instructor/PFE Services DFE TECH 214-***-****

Contact this candidate