RESUME

Aaron Nicholas Caraballo

***** ******* ****** **.

San Antonio, TX 78230

Phone; 210-***-**** (cell)

http://beknown.com/aaron-caraballo

E-Mail: acum27@r.postjobfree.com

Objective

I am a motivated individual seeking for a position in an organization, which offers opportunities for personal achievement. I am a dedicated individual who has an ambition to succeed in any given environment. I am always up to a challenge whatever the situation. I get along well with others, and also work efficiently on my own.

Work Experience

May 2015 – Present

Goodheart Specialty Meats

11122 Nacogdoches Rd, San Antonio, TX 78217

Position Title: Maintenance/Mechanic

Job Duty: Complete preservation and maintenance on all USDA food production equipment to include forklifts, stand-up power pellet jacks, yard mull and cherry pickers. Provide troubleshooting, services and maintenance on production equipment, rewire the relays to change their operational characteristics, built and reengineered panels tolerate the plant-floor environment conditions (such as dust, moisture, heat, cold), Programmable logic controller (PLC) and Programmable logic relay (PLR) control and monitored connected to sensors, open/close of a valve, liquid pressure and temperature ranges above/below a certain level reached, as start an engine, machinery on factory assembly lines and LCD screen for viewing simplified ladder logic, refrigeration systems, plumbing, electrical, gas lines, welding needs, wall texturing, painting, initial services, remodeling, re-occurring services and oversee contractors.

Supervisor: Richard Maynard Phone No: 210-***-****

December 2014 – May 2015

Aerotek San Antonio

10000 San Pedro Ave, Suite 850, San Antonio, TX 78216

Position Title: Mechanic

Job Duty: Mechanic, major duties include shop and field hands-on repair, diagnostic and service on diesel tractors & trailer, power generators, forklifts, aerial work platforms, general construction equipment and wielding needs. Commercial Driver License (CDL) Class A.,

Reason for Leaving: Contract Work

Supervisor: Steven McQueen Phone No: 210-***-****

March, 2014 – December, 2014

Parrish & Company, Inc. 26995 Hwy. 281 N. San Antonio, TX 78260

Position Title: Senior Technician and lead

Job Duty: Provide technical service and new installation, upgrade or replacement of fireplace, gas grill products, appliances GE and others bands, cabinet, Clopay garage doors and LiftMaster garage door openers. Assisted with the sales department on upgrades and installs. Provide annual service check-up, and repair operational issue. Install natural gas log sets, clean out ashes and wood from fireplace, remove and dispose of existing gas logs, before new gas log installation. Install fireplace glass doors and decorative fronts, natural gas direct-vented fireplace; wall switches; remote control and fireplace fan kit or blower. Repair and maintain parts and digs by welding and redesigning. Perform annual fireplace tune-up for all natural/LP gas direct vent.

Reason for Leaving; cutting back under 40 hours a week

Supervisor: Elisabeth Sirianni Phone No: 830-***-****

March 2011 – March 2014

Standard Truck & Trailer Diesel Repair & Service, Hickman Trucking Inc.

5854 Bicentennial St., San Antonio, TX 78219

Position Title: Manager / Assistant GM, Sales, and Repair & Service

Job Duty: Manager, shop mechanic, sales, HR Department, hands-on repair and service on automotive, light, mid, and heavy duty trucks, truck tractors, trailer, generators, forklifts, aerial work platforms, man lifts and general construction equipment, including tires, complete HAVC Service, welding needs, computer diagnostic, 24-hour roadside service, OEM annual services, additional accessories and aftermarket parts. Dispatcher and Driver of commercial Class-A truck with tankers, end dump, and belly dump trailers transporting aggregate & cement.

Reason for Leaving: Company went out of Business

Supervisor: Alejandro Hickman Phone No: 210-***-****

March, 2009- March, 2011

Chromalloy Component Services, Inc. 303 Industrial Park, San Antonio, TX 78226

Position Title: Mechanic/Detailer/Miller/Welder and trainer

Job Duty: Remanufacture GE, Rolls Royce, Pratt & Whitney and IAE, power plant parts, jet engine, dismantling and assembly of engines, modules, components, fabricate, construct, alter, repair fiberglass/honeycomb, the resin injector part removal and basic de-flash Mold leak-check, filling and paint preparation, De-flashing, Grinding, milling and cutting and maintain tooling, dies, jigs, holding fixtures, assemblies, sub-assemblies and/or shop aids. Sets up and uses pneumatic tools such as screw guns, variety of precision measuring instruments such as: dial indicators, micrometers, gauges, protractors, and calipers, etc.; Uses common hand tools such as: drills, reamers, deburrers, files, rivet guns, bucking bars, etc.; Operated such equipment as grinders, band saws, presses and Hydraulic CNC Press Brake. Set up and used torque wrench, hand tools such as: wrenches, safety wire pliers, etc.; removed and replaced panels, insulation and compounds, by means of all type of mechanical fasteners. Trained on and used Silver Brazing, mig welder, Sand, Shop ping, and Glass Bead Blasting; Fabricate metals, tubes, cables, and hoses for use in development and modification of aircraft parts in accordance with DOD, manufacturer, company, supplier and other directives.

Reason for Leaving: Personal – To train for a Commercial Driver License (CDL) Class A

Supervisor: Fred Coutts: Phone No: 210-***-****

March, 2008– April, 2009

Bass Pro Shops Outdoor World, L.P., 17907 IH 10 W, San Antonio, TX 78257

Position Title: Receiving

Job Duty: Warehouse, Receiving, Stocking, Shipping; I unloaded and loaded tractor trailers using standup forklifts, cherry pickers, man lifts and plate floor jacks, processed in and out merchandise through-out the warehouse and departments in the store.

Reason for Leaving: Part time work during school less than 40 Hours per week

Supervisor: Greg Valle, Manager Phone No: 210-***-****

January, 2008– September, 2008

AutoZone, 3723 Colony Drive, San Antonio, TX 78230

Position Title: Parts Processer

Job Duty: Casher, Sales, Customer Assistance and Stocking

Reason for Leaving: Part time working less than 20 Hours per week

Supervisor: Ben Quintana Phone No: 210-***-****

November, 2007– December, 2007

RadioShack, 5222 De Zavala Road, San Antonio, TX 78249

Position Title: Sale Associate

Job Duty: Casher, Sales, Customer Assistance, Stocking

Reason for Leaving: Part Time Seasonal during holidays

Supervisor: Larry Requa Phone No: 210-***-****

June, 2007–August, 2007

Pratt & Whitney Military Aftermarket Services - 309 Avionics Circle, San Antonio TX 78229-1812

Position Title: Parts/Tooling warehouse and Maintenance

Job Duty: Power plant repairs, dismantling and assembly of complete with DOD.

Reason for Leaving: Summer Internship - Supervisor: Teresa Glass Myer Phone No:210-***-****

May, 2006 -November, 2006

Culver’s, 836 De Zavala Road, San Antonio, TX 78249

Position Title: Food Service - Job Duty: Crew Dining, Delivery, and Hospitality

Reason for Leaving: Summer and after school part time job - Supervisor: Lesa Koster Phone No: 210-***-****

March, 2005– August, 2005

Six Flags, 17000 IH10 West, San Antonio, TX 78251

Position Title: Park Services - Job Duty: Ride operator, park clean-up and guest assistances

Reason for Leaving: Seasonal, after school and summer job. - Supervisor: Terry Morgan Phone No: 210-***-****

Education

2004 - 2008 Clark High School

5150 De Zavala Road, San Antonio, TX 78249

Major: Metal Trades/Welding

Layouts and operation for the following:

CNC Plasma Robotic cutting machine,

Epilog 8000 Laser Class 3R, Fiber Mark Metal Engraving & Plastic

Marking System

Techno CNC LC Series 4848 Router

Different types of MIG, Tig, Arc welding, Flux Brazing, industry tools and hydraulic machines,

2006 - 2008 St. Philip's College, Alamo Area Aerospace Academy

800 Quintana Road, San Antonio, TX 78211

Major: Aircraft Turbines Mechanic & Manufacturing Technology Completion Certificate

Introduction to Aviation

Ground Operations

Federal Aviations Regulations

Shop Practice

Aviation Science

Skills USA participant

Environment Health & Safety (EH&S)

Manufacture and Maintenance operations on aircraft, structures, equipment, engines, components, fiberglass and honeycomb panels, systems testing and Airframe & Power plant repairs. Read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc. Sets up and uses pneumatic tools such as screw guns, etc. Sets up and uses a torque wrench. Uses common hand tools such as: wrenches, safety wire pliers, etc., removed and replaced panels, floorboards, insulation and sealing compounds, by means of all type of mechanical fasteners.

SKILLS / TRAINING

2005-2006 Skills USA Texas, District Leadership

Conference Certificate & Metal Trades State Competition Winner

2006-2007 Skills USA Texas, District Leadership

Conference Certificate & Metal Trades State Competition Winner

March 3, 2007 Federal Aviation Administration

Southwest Aviation Trade School (SWATS): Maintenance Completion

Certificate FAA

February 15, 2009 Southwest Motorcycle Training

Motorcycle operator training course completion: MSF Card # 387884

November 2010 Federal Aviation Administration Course

FAA Aviation Maintenance Technician Ward Program: Certificate of

Training Online Course

January 2011 Federal Aviation Administration “Bronze Award”

Failure to Follow Procedures – Installation” Certificate of Achievement

2009-2013 American Red Cross Certifications

Pathogens Training CPR-Audit, AED- Audit, and Blood Borne Pathogens

Training Services

March 2011 Hickman Trucking, Inc.

Commercial Driver License (CDL) Class-A Training

January 9, 2015 BW Gas Alert Extreme, Safety Store & Training Center - PPE &

Monitor

H2S Training by ANSI Z390.1/API 49 Guidelines: Including Confined

Space / LOTO

January 9, 2015 PEC Safety

PEC Basic Orientation

Contact this candidate