Safety Officer
Resume:
Jan Carlo M. DACANAY
Feraren Road, Santiago Sur, City of San Fernando, La Union 2500 PHILIPPINES
Contact No. +639*********/ +6372- 888-56-90
e-mail address: ****************@*****.***
PERSONAL INFORMATION:
Date of Birth : January 14, 1991
Nationality : Filipino
Language : English & Filipino
Status : Married
Current Location : Philippines
Objectives: To find a very challenging job in the Engineering, Procurement & Construction (EPC) industry and where I can develop my full potential as a skilled worker. Also, to devote my time, skills & knowledge that can contribute for the common objective of the organization in attaining the completion of the project in time.
Course: Associate in Computer Technology
School: Union Christian College - City of San Fernando La Union, Philippines
Year Attended: 2007 – 2009
COURSE DESCRIPTION:
Computer soft wares:
Microsoft word, Spread sheets, Microsoft Power point, Software Applications.
Computer hard wares:
Trouble shooting of PC, Installation of computer hardware’s, Networking Troubleshooting.
Course : AutoCAD
Conducted by : MERALCO Foundation Incorporated
Venue/Date : MFI Building, Ortigas Avenue, Pasig City, Metro Manila, Philippines 1600
Nov.-Dec 2010
COURSE DESCRIPTION:
Computer Soft Ware: Computer-aided design (CAD) and drafting in both 2D and 3D.
Work Experience:
Kaefer NC at Koniambo Nickel Project,Vavouto Voh,New Caledonia
Health, Safety & Environment (HSE) Field Assistant/Permit To Work Requestor
May 21, 2012 Until May 2, 2015
Job Summary:
My primary job as Safety Officer is to ensure that all site staff & workers follow the safety rules and regulations of the construction project.
Implementation of the Safety Rules & Regulations.
oResponsible for implementing the company's project health and safety program that were adopted and approved by the company or the project management.
oTo ensure that the program complies with Occupational Safety and Health Administration and the National Safety & Health Standards regulations of the government of the host country.
1.Identification of Risks & Hazards in the Construction Site.
oResponsible in protecting all project employees from any risk and maintaining the project from any damage and defect.
oTo watch over current working conditions and investigate employees work locations to pinpoint potential hazards in the manner of work, the materials & equipment used.
oTo identify health and safety concerns that applies to the construction site. If we identified or someone brings a concern to the attention of the construction safety officer, we must investigate and then administer the proper procedure to correct the concerns.
oAfter identifying the potential risk factors and rectifying the risks, is to properly implement the changes and new processes in the work environment.
2.Administration of Safety Rules &Regulations.
oTo maintain the proper documents, standing operating procedures and manual required by the government & project management.
oThe HSE Team audits the documents and ensures that the items are up to date and in order.
3.HSE communicates with the Gov’t., Proj. Mgmt. down to the Field Workers.
oAs a HSE Team, to communicate with the government, company management and workers about the required health and safety rules and regulations. This communication occurs on the job site and elsewhere.
4.Reports of Accident / Incident
oTo report any on-the-job accident or safety violation to the HSE Manager.
oTo investigate the reported accident /incident and identify the root causes and recommend pre-empted measures in avoiding this to happen in the future.
Trainings and Seminars Attended:
Course : Construction Occupational Safety And Health
Conducted by : Synerquest Management Consultancy Services Inc.
Venue/Date : Commonwealth Ave., Batasan Hills, Quezon City, Philippines.
June 22- June 26, 2015
Course : Basic Occupational Safety And Health
Conducted by : HealthCare Advantage Training institute
Venue/Date : Barangay Kapitolyo,Pasig City, Philippines.
March 3, 2014-March 7, 2014
Course : Radiographic Test (RT) Level II
Conducted by : Philippine Nuclear Research Institute
Venue/Date : Commonwealth Avenue, Diliman Quezon City, Metro Manila
August 17- September 2, 2009
Course Description : This process uses gamma-ray radioisotopes to test materials for flaws such as invisible cracks, defects and occlusions in welds, etc.
Course : Welding Inspector Course
Conducted by : Philippine Nuclear Research Institute
Venue/Date : Commonwealth Avenue, Diliman Quezon City, Metro Manila
October 5-9, 2009
Course Description : Used to check for obvious problem areas, such as leaks, misalignment on exposed metal surface and weld surface discontinuities by referring it on ASME V CODE
Course : Penetrant Testing (PT) Level II
Conducted by : Philippine Nuclear Research Institute
Venue/Date : Commonwealth Avenue, Diliman Quezon City, Metro Manila
October 12-16, 2009
Course Description : Method which allows for the detection of open and surface breaking discontinuities on all metallic materials, numerous mineral materials (glass, ceramics) and, after satisfactory compatibility test, some organic materials.
Course : Magnetic Particle (MT) Level II
Conducted by : Philippine Nuclear Research Institute
Venue/Date : Commonwealth Avenue, Diliman Quezon City, Metro Manila
October 19-23, 2009
Course Description : Is a method for locating surface and sub-surface discontinuities in ferromagnetic material. It depends for its operation on the face that when the material or part under test is magnetized, discontinuities that lie in a direction generally transverse to the direction of the magnetic field.
Course : Ultrasonic Test (UT) Level II
Conducted by : Philippine Nuclear Research Institute
Venue/Date : Commonwealth Avenue, Diliman Quezon City, Metro Manila
November 9-20, 2009
Course Description : It is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is a form of non-destructive testing used in many industries including aerospace, automotive and other transportation sectors.
Course : Eddy Current Testing (ET) Level II
Conducted by : Philippine Nuclear Research Institute
Venue/Date : Commonwealth Avenue, Diliman Quezon City, Metro Manila
March 1-12, 2010
Course Description : Eddy current techniques are commonly used for the nondestructive examination (NDE) and condition monitoring of a large variety of metallic structures, including heat exchanger tubes, aircraft fuselage, and aircraft structural components.
Course : Shielded Metal Arc Welding (SMAW) NC II
Conducted by : DMMMSU-TESDA City of San Fernando La Union
Venue/Date : City of San Fernando La Union
May – June 16, 2009
Course Description : It is a manual arc welding process that uses a consumable electrode coated in flux to lay the weld. An electric current, in the form of either alternating current or direct current from a welding power supply, is used to form an electric arc between the electrode and the metals to be joined. As the weld is laid, the flux coating of the electrode disintegrates, giving off vapors that serve as a shielding gas and providing a layer of slag, both of which protect the weld area from atmospheric contamination.
I hereby certify that the above information are true and correct through the best of my knowledge and belief.
Contact this candidate