Engr. Feliciano E. Baltazar, Jr.
Address: #** ********* **. *** ********, CAA, Las Pinas City
Contact No.: 090********
RME License No.: 0066575
E-mail Address: actga0@r.postjobfree.com
Key Skills and Knowledge Areas
Solid command of technologies, tools and best practices in designing mechanical equipment using SolidWorks, Autodesk Inventor, AutoCAD and engineering drawings.
Excellent shop and safety skills honed from work as a machinist and welder. Able to design and fabricate tooling and mechanical test fixtures.
Basic machining such lathe machine and milling machine.
Strong team collaboration skills. Work closely with team members to achieve engineering goals.
Perform Value Analysis, FEA, and Lean Manufacturing.
CAREER HISTORY
Senior Mechanical Design Engineer
Skyware Technologies Asia
LISP 1, Cabuyao, Laguna
August 3, 2015 up to present day
Job Responsibilities:
Development of precision mechanical components from concept to detailed design.
Design and validation of platforms and enclosures using following technologies: die-casting (Al, Zn, Mg), CNC machining, injection moulding, cold/hot forming, stamping, weather sealing, passivation and coating.
Efficient integration of PCBAs into mechanical enclosures
Design and validation of thermal cooling solutions.
Mechanical design of product prototypes and engineering samples.
Design of fixtures for test-systems and production equipment
Design of antenna brackets.
Supporting the transition from prototypes into mass production.
Product cost awareness
Interaction with vendors and toolmakers
Continuous search of new solutions and technologies.
Close collaboration with other members of the R&D team in order to achieve on-time delivery of product developments
Production Manager/ RND
Philab/I-Lab
Los Baños, Laguna
July 2014 – July 2015
Job Responsibilities:
Lead day to day production activities for a multi-shift operation, ensuring that production metrics are met including but not limited to: safety, efficiency, productivity, and quality standards
Ensure that all production employees are working safely and acting in accordance with established procedures and policies
Assures a clean and safe working environment for all employees, maintaining ‘6S’ standards, emphasizing prevention of potential hazardous conditions. Addresses unsafe acts and unsafe conditions. Conducts safety training for employees. Reports accidents in a timely manner and participates in accident investigations as required.
Recommends and implements changes regarding production capability, tooling, machine replacement, and staffing to support production plans
Identifies and leads implementation of cost-effective procedures, systems, tooling, equipment, etc., to continually improve manufacturing productivity
Confer with the Operations Manager and Supply Planners to establish work schedules and attain multiple facility goals
Supports implementation of new process and product development
Provides coaching, information, constructive feedback, and encouragement to Production Supervisors and floor associates to promote growth and development
Develops open lines of communication to continually monitor employee attitudes and concerns; implements appropriate actions with input from HR
Engineering Design Manager
Esco Philippines Inc.
Pasay City
June 2012 up to September 30, 2013
Job Responsibilities:
Confer with management, production, and marketing staff to discuss project specifications and procedures.
Coordinate and direct projects, making detailed plans to accomplish goals and directing the integration of technical activities.
Recruit employees; assign, direct, and evaluate their work; and oversee the development and maintenance of design engineers competence
Develop and implement policies, standards and procedures for the engineering and technical work performed in the department, service, laboratory or firm.
Concept-to-completion development of equipment
Participate in/ follow the prototyping process, from sheet metal fabrication, to assembly and testing, in order to identify areas for improvement, to strive to design for manufacturing/assembly/service.
Development, maintenance and continuous improvement of manufacturing work instruction and process sheets including bending drawings, welding instructions, assembly work instructions, test procedures and others
Conduct training of Solidworks to new design engineers and perform CAM, Nesting and G-codes
Design new equipment (incremental and radical innovation)
Supervisor in Research and Development
Middleby Philippines Corporation
113 Technology Ave., Laguna Technopark, Binan, Laguna
March 2011 up to May 2012
Job Responsibilities:
Conduct exploratory and applicative research and development of new - kitchen equipment products and processes (reverse engineering).
Perform complex processing experiments and lead the projects.
Perform technical reviews of project specifications and drawings and trade shop drawings for both technical content and practical application.
Analyze and provide input to assess the potentials benefits of alternative materials or products for the applications intended.
Work as both proactive factor in identifying and correcting future/related problems through technical review and experimental simulation.
Part-time Instructor
Philippine State College of Aeronautics
Manlunas St. Villamor Air Base, Pasay City
June 2009 up to April 2011
Subjects Handled:
Thermodynamics Engineering Materials
Probability and statistic Vector Analysis
Strength of Materials Engineering Mechanics
Engineering Management Differential Calculus
Engineering Economy Integral Calculus
Full-time Instructor
Technological University of the Philippines – Taguig
Km. 14 West Service Road, South Super Highway Taguig City
May 28, 2006 up to May 2009
Subjects Handled:
Differential Calculus Thermodynamics
Integral Calculus Industrial Power Plant
CADCAM Power Plant Engineering
Metallurgy and Heat Treatment Fluid Mechanics
Engineering Measurement (Physical) Internal Combustion Engine
Engineering Measurement (Dimensional) Refrigeration and Air-conditioning
Physics 2 Vibration Engineering
Fixed and Limits Engineering Management
Blueprint Reading Alternatives Sources of Energy
Machine Design Engineering Mechanics
Strength of Materials
Part-time Instructor
Rizal Technological University
Boni Avenue, Mandaluyong City
January 13, 2006 up to May 2007
Subjects Handled:
Industrial PowerPlant Engineering
Technical Electives
Fluid Machineries
Instrumentation and Control Engineering
Vibration Engineering
Integral Calculus
Airport Mechanical Engineer
Air Transportation Office
MIA Road, Pasay City
Feb 2005 up to May 2007
Job Responsibilities:
Monitor CVCF Equipment and perform daily-set up checklist
Ensure all equipment is in good condition such as GENSET and other related equipment for power plant
Design Engineer
Perezonic Engineering Services
Tabe, Guiguinto Bulacan
June 29, 2004 to Feb 2005
Job Responsibilities:
Design precision tooling use in semiconductor industries and fabrication of sheet metals (2d and 3d design)
Test Maintenance Technician
Psi Technologies Inc.
FTI Electronics Ave. FTI Complex, Taguig Metro Manila
Test Department
April 1, 2002 to April 1, 2004
Job Responsibilities:
Assigned at tape and reel, responsible for maintaining all machines in working conditions and capable to be used in production.
Responsible in performing set-up procedure and calibration of machines. Assisting the process engineers in upgrading qualification of machines and new products to be processed on the line. Performs preventive maintenance and troubleshooting.
Perform daily set-up checklist, system diagnostic, board repair, tester repair, machine set-up and conversion.
Test Machine Handled
-Tesec 9512
Tester Handled
-Spektra 881-TT/A
-Spektra 881-TT/B
-Delta VGS/VDS/VBE
Tape and Reel Machine
-STI TR18AS2
-STI TR18AS3
Test Maintenance Technician
Amkor Technology
Km. 13 South Super Highway East Service Road, Alabang Muntinlupa City
Test Department
June 1999 to January 2000
Job Responsibilities:
Assigned at Sillner Integrated Processing System (IPS) – 352.
Responsible for maintaining all machines in good working condition.
Ensuring before and after my shift are all accounted for.
Test Machine Handled
-Sillner IPS-352
-Ismeca T-16
-Ismeca NT-1
Responsible for monitoring required parameters in the line. And before the shift ends making notes on the machine parts that has been replaced and the machines problem that has been encountered during my shift.
Test Technician (On the job training)
Analog Devices Phils.
Test Department
March 1999 to November 1999
Job Responsibilities:
Assist technician on operation and maintenance of test equipment. Responsible for monitoring the parameters of machines and back-up sustaining machines
EDUCATIONAL ATTAINMENT
University of the Philippines-Diliman
Master’s on Technology Management
October 2008-present
Technological University of the Philippines
B.S. Mechanical Engineering
2001 – 2004
Technological University of the Philippines
Electromechanical Technology
1997 – 2000
TRAINING/SEMINARS ATTENDED
Systems Technology Institute(STI-Pque. City)
Computer Office Specialist (Sept. 21, 1996)
SMC Pneumatic(Phils.), Inc.
Pneumatic Technology (Feb. 26, 1999)
CADVISION Engineering Technologies
Autocad 2002 (Feb 22 – Apr. 25, 2004)
MICROCADD Technologies Inc., Co.
Autodesk Inventor vr. 6.0 (Oct 8 – Nov. 13, 2004)
Teacher’s Technician Training Program (April 23 – May 15, 2007)
-Strengthening Teachers Educational Perspective
-Principles of Teaching
-Methods of Teaching
-Measurement and Evaluation
-Educational Technology
Electroplating
Metal Industries Research And Development Center
Gen. Santos Ave., Bicutan Taguig, Metro Manila
Wrought Iron Making
Metal Industries Research And Development Center
Gen. Santos Ave., Bicutan Taguig, Metro Manila
REFERENCES
Name Position Company
1. Engr. Christopher Timog Service Engineer Cryo Specialist Asia
2. James Peewee Vizconde Service Manager Philab Industries Inc.
3. Willie Joseph Parcon Professor Philsca