J M RAKIBUL HASAN

Apt: ***,*** Platt's Lane, London, ON, N6H4P4, Canada Cell: +1-226-***-****

E-mail: acro02@r.postjobfree.com Linked in profile: https://ca.linkedin.com/pub/j-m-rakibul-hasan/82/523/268 SUMMARY

#High-energy, confident professional with a compelling enthusiasm for technology.

#Extensive and diverse interest in Preparation of Design Specifications, Geotechnical Engineering, Construction Management, Water Recourses Management and Treatment, Sustainable Building Design, Building Information Modeling, Project Planning and Scheduling, Construction Safety Management, Construction Quality Assurance, Environmental Protection, Remediation of Contaminated Sites.

#Software: Microsoft Office, AutoCAD, PLAXIS, Autodesk Naviswork, Revit, XPSWMM, STAR CCM.

#Traveled and lived abroad only for the enthusiasm of acquiring knowledge in Civil Engineering from world class University.

#Ability to work independently and in a team-oriented environment under deadlines with minimal supervision.

EDUCATION

University of Western Ontario (UWO), Canada September, 2014-August 2015 Master of Engineering in Civil and Environmental Engineering, with an average of 81.6% marks. All Courses Laboratory and Field Works

* Foundation Engineering *Autodesk Navisworks and Revit as Building

*Advanced Soil Mechanics Information Modeling Tools.

*Assessment and Remediation of Contaminated Sites *Atterberg Limit test of Sombra clay.

*Building Sustainability *Tri Axial and Odometer test of Sombra Clay.

*Building Information Modeling *PLAXIS and L-Pile for Foundation of Buildings

*Seismic Analysis and Design of Buildings *STARCCM for sustainable wind flow analysis.

*Advanced Concrete Technology *1 day certified practical training on “Jar Testing”

*Drinking Water Treatment and “Chlorine Analysis” of Drinking Water in

*Advanced Storm Water Management “Walkerton Clean Water Center”, Ontario.

*Project Planning and Management *Study tour to “UV Disinfection & Water

*Wind Engineering Treatment Solutions-TrojanUV” and “Lake Huron

*Intellectual Properties of Engineers & Elgin Area Water Supply Systems”, Ontario. Islamic University of Technology (IUT), Bangladesh January, 2010- Oct, 2013 Bachelor of Science in Civil and Environmental Engineering, with a first class. Core Courses Laboratory and Field works

*Surveying *Chemistry of Engineering Materials Lab

*Foundation Engineering *Civil Engineering Drawing

*Soil Mechanics and Geotechnical Engineering *Practical and Quantity Surveying

*Structural Analysis and Design *Transportation Engineering Sessional

*Design of Concrete Structure *Workshop Practice

*Steel Structure *Physics Lab

*Design of Pre-Stressed Concrete *Materials and Mechanics of Solid Lab

*Engineering Geology and Geo Morphology *Geotechnical Engineering Lab

*Ground Water Engineering *Structural Analysis and Design Sessional

*Mechanics of Solid *Fluid Mechanics Lab

*Construction Materials *Open Channel Flow Lab

*Energy and Environment *Environmental Engineering Lab

*Integrated Water Resource Management *Design of Hydraulic Structures

*Environmental Pollution and its Control *Design and Concrete Structure Sessional

*Coastal Engineering and Management *Practical Training at “Public Work Department”

*Solid and Hazardous Waste Management and “House Building Research Institute” Bangladesh.

#Thesis: Solar Disinfection of Micro Biological Contaminants of Water in South West part of Bangladesh. TECHNICAL PROJETCS

Design of an enclosure based Sustainable Green Building in Toronto, Canada Sept’14-Dec’14

-Analyzed Sustainable Enclosure based Strategy for humid summer but cold winter of Toronto.

-Designed a one storied 1260 square feet building using Google sketch up software.

-Dealt with shading, thermal load and R value calculations with building response to wind velocity and pressure by maximizing solar energy use, high performance building enclosure, natural ventilation, super insulation and more, used STARCCM for the wind response analysis of the building. Design of a Minor Storm Water Management System Using XPSWMM for Sept’14-Dec’14 London, Ontario, Canada

-Designed a minor system to meet City of London design guidelines for a 2 year storm by XPSWMM.

-Dealt with the Layout of most economical Conduit Network for 4.6 ha of total Drainage area. Wind Generated Structural response of a tall building situated in Toronto, Canada Sept’14-Dec’14

-Designed a 90 m tall building by calculating design Wind Speed with Gumbel Distribution.

-The structural response was measured by the bending moment, the peak top deflection, and the maximum amplitude of top acceleration, which were calculated following the dynamic analysis method as outlined in the NBCC, In order to mitigate the excessive structural response, the building density was recommended to be increased by thickening the slab and shear walls. Design of Shallow and Deep Foundation for a cement plant in Columbia Jan’15-April’15

-Designed foundations for given loads and conditions using PLAXIS and L-Pile for the design-analysis.

-Used Microsoft excel for developing formulas and calculated capacity, lateral capacity, settlement, group pile settlement and lateral deflection of footing to yield best economical and sustainable design. Design of a cold storage warehouse using Building Information Modeling Jan’15-April’15

-Designed a cold storage warehouse using NAVIS WORK and REVIT.

-Analyzed clash detection, 3d coordination and energy analysis by Building Information Modeling tools. Survey on Frazer River Sand in Richmond, British Columbia, Canada Jan’15-April’15

-Survey on the basic soil properties of Frazer River Sand such as grain size distribution curve, specific gravity, maximum and minimum void ratio, isotropic and anisotropic consolidation behavior, monotonic and cyclic shearing response, specimen preparation, aging and on critical state plasticity model, presenting cone penetration field test data and shear wave velocity measurements. Project planning and management of Millau Viaduct Bridge, France May’15-June’15

-Reviewed the project of the 12th highest bridge deck Millau Viaduct with scope, procurement, risk, quality, human resources, time and cost analysis.

Assessment and Remediation of Dominant Contaminants of Picatinny May’15-July’15 Arsenal, New Jersey, USA

-Remediation techniques were proposed for Lead, Aluminium and TCE contaminant in soil, subsurface soil and surface water of Picatinny arsenal analyzing the hydrology, geology and ground water flow according to 2007 United States Environment Protection Agency Record of Decisions

-Pilot project for Soil vapor Extraction and Stabilize and Solidification were designed with a primary cost analysis for remediation.

TECHNICAL SKILLS

Operational: Windows XP, Windows 7, Windows 10.

Microsoft Products: Microsoft Word, Microsoft Excel, Microsoft Project, Microsoft Power Point. Software: ETABS, AutoCAD, Navisworks, Revit, PLAXIS, XPSWMM, STAR CCM, L-Pile. EXTRA CURRICULAR ACTIVITIES

Champion 2010 Inter dept. Cricket tournament, Runner-up 2010 University Chess tournament, Gold Team Debater in Inter College 2007,Anchor and Presenter of 2007 Inter College Science festival. VOLUNTEER WORK EXPERIENCE

Project Show casing Coordinator in 2013 Inter University Civil Engineering Festival, Volunteer for deprived of children in Bangladesh in KHELAGHOR (2011-2013), Inter University Chess Captain 2013. INTEREST

Civil Engineering, Astronomy, Archaeology, Psychology, History, Travelling, Soccer, Cricket, Chess.

Contact this candidate