Quality Inspection
Resume:
Maurice
Gibson
**** **** ******, *.*. Apt#*
Washington, DC 200019
Email : *******@*****.***
SUMMARY OF QUALIFICATIONS
Dynamic Quality Specialist with a proven history of successful management and production quality control. Expert at
streamlining operations, increasing efficiency, and improving overall product quality. ASQC/CQE certified with
demonstrated team building skills. Excellent interpersonal communications skills with strong analytical ability. Comfortable
working in a wide variety of environments with all levels of management.
EMPLOYMENT HISTORY
Orbital Science Corp., Dulles, VA May 2011 – Nov 2012
Senior Quality Inspector Propulsion Work Center / Non Destructive Test / X-Ray Inspector
• Perform x-rays on propulsion parts for satellites, perform mechanical, visual, PT, inspections on all materials for
satellites, perform ATP, pressure, electrical/ electronic on SMT, PWB,PCB,PWA, to component level per J-STD 100
and NASA Std 8737.3,4 testing on satellites per specifications by NASA, GMD Government Missile Defense Systems.
• Perform clean room inspections of all satellites prior to final shipping to launch sites.
• Perform GDT inspections for all flight and non-flight materials perform inspections using PCDIMS software to ensure
material has been accepted as required per SOW and specifications.
• Verify and approved Test procedures and equipment for Satellite testing of electrical components.
Mar 2010 – Mar 2011
Oeaneering International
NDT Welding Quality Inspector
• Perform welding inspection on all fabricated weld parts to ensure compliance to specifications.
• Inspect Mechanical parts for fit-up inspection as they relate to the overall build of production.
• Ensuring that all materials and assemblies are in compliance with AS9100/ISO 9001 standards.
• Responsible for specifications as required by Oceaneering International.
• Weld Inspector to NDT Level 11 standards.
• Perform GDT inspections as required by specifications.
Northrop Grumman Company, Elkridge, MD Jan 2008 - Aug 2009
Source / Quality Inspector
• Performed First Article Source inspection for AS9100/ISO 9001 standards.
• Traveled to various sites ensuring that all materials and assemblies are in compliance with AS9100/ISO 9001
standards.
• Responsible for specifications as required by Northrop Grumman.
• Weld Inspector to NDT Level 11 standards.
Coca-Cola Enterprises Inc., Silver Spring, MD Oct 2006 - Sept 2007
System Quality Manger
• Managed entire Quality system; revised, created, and rewrote Standard Operating Procedures and work Instructions
for the Quality system certification program.
• Managed all corrective and preventive actions for GMP’s, and HACCP Programs.
• Managed Management Review, Training, Member of the Immediate Action Team.
1
• Approved all change requests for document control.
• Ensured all documentation was in compliance with Coca-Cola Enterprises Inc., State and Local laws.
• Prepared organization for TCCQS certification.
Electronic Development Corporation, Columbia, MD Mar 2006 - Oct 2006
Senior Quality Associate
• Managed First Article Inspections, material handling, incoming, in process Inspections and Final Inspections,
Corrective Actions and Preventive Actions
• Revised and rewrite procedures and processes as they impact the company objectives 3rd Party Vendor Audits.
• Equipped company for ISO Certification.
• Working Knowledge of PWB’s and PWA’s
• Knowledge of IPC 610, 700 and Conformal Coating as they related to manufacturing of components for Military
Equipment being sent overseas to Iraq.
• Verified First Article reports for specialized circuit boards for military use.
• Perform inspections using PCDIMS as required by specifications.
CR International, Beltsville, MD Jun 2005 - Oct
2005
Quality Manager
• Managed entire spectrum of the Quality Program to ensure that all processes and procedures are in compliance with
ISO Standards and Company Policy and Objectives.
• Managed Configuration Management Department and Inspection Department.
• Managed and supervised all Internal Audits, Employee Training, Supplier Corrective Action, Preventive Action,
Continuous Improvement, and Printed Wire Board Inspections.
• Reviewed all Customer and Company Specification for compliance.
• Managed Quality records and revised all processes and procedures.
• Approved all Engineering Changes, Approved all Vendors. Perform Gap Analysis for preparation for Flight certification
(NASA Standards) Managed 3 Inspectors’.
TAC Worldwide (SAFT) Nov 2004 - Jun 2005
ISO Management Representative
• Managed various stages of the Quality Management System to ensure compliance with ISO Standards 9001-2000.
• Revised, rewrite, incorporate new procedures and processes as they related to performance of the company.
• Improve the Quality System transition from an R & D Facility to a Manufacturing and R & D Facility.
• Work closely with all Departments to ensure that procedures and processes are current.
• Perform Gap Analysis for preparation of AS9100 Standard.
• Ensured that all inspectors were using the appropriate IPC Standards for inspection of all PWA’s and PWB’s that were
being manufactured at the facility.
• Verified all NASA inspections, environmental inspections as they related to Space flight product being produced at the
facility.
• Verified Calibration processes and procedures to ensure compliance
• Performed Audits with contractor manufacturing companies to ensure that are in compliance with ISO Standards, IPC
Standards, and NASA Standards.
TAC Worldwide (Advanced Programs) May 2004 – July 2004
Quality Assurance Inspector
• Inspected incoming material such as sheet metal components, cables, connectors, keyboards and mouse.
• Used a computer to access information related the in-coming process.
• Read and understand product documentation and drawings.
• Use calibrators as required.
• Inspected monitors, sub-assemblies, printed wire boards and assemblies, Electronic /Electrical components during
buildup.
• After testing has been completed, product must be moved quickly to next QA station.
• Inspect monitors and completed systems in relation to bill of materials, checklists, configuration sheets and release
product for shipment or recall to manufacturing
Lucent Technologies, Landover, MD 1998 - 2003
Calibration Manager /Senior Quality Inspector
2
• Managed various areas of the Quality Management System to ensure that processes and procedures were in
compliance with the organization standards.
• Managed the entire calibration processes for 3 Million dollars of Calibrated Equipment.
• Revised, rewrote, and reviewed all procedures and processes as they related to the overall functionality of the ISO
Standards and Company’s global policies.
• Managed all Customer related corrective actions and preventive actions as well as internal issues as the related to the
productivity of the product.
• Work with all Departments on Quality issues to ensure compliance and continual improvement(s).
• Managed all inspection processes for the entire facilities.
• Work directly with the hardware, mechanical software, and testing engineer’s teams to ensure compliance with
customer specifications Commercial 600,610c, 700, Mil-Specs, ANSI Z540-1.
• Investigation of all Corrective Actions and Preventive Actions Specifications and guidelines.
• Familiar with SPC (Statistical Process Control), IPC Standards as they relate to ISO 9001 2000 standards and,
company policy.
• Managed 19 Inspectors.
Yurie Systems, Landover, MD 1995 - 1998
Senior Lead Quality Inspector
• Managed and maintained quality process to ensure the proper inspection of incoming, in-process and final inspections
as they relate to the production of products manufactured.
• Performed internal audits, in compliance with, the International Standards Organization (ISO), to maintain certification
and continual improvement(s).
• Managed 10 Associates.
TRAINING PROFESSIONAL DEVELOPMENT:
Quality Assurance Dept. of Labor Apprenticeship Program
Certified Quality Auditor, Lucent Technologies Learning Center.
ISO Standards, Lucent Technologies Learning Center.
Quality Management Systems ISO, Lucent Technologies Learning Center.
American Society of Quality Member ASQ Organization
Military MOS: Motor Transport, Driver, Maintenance, Mechanical Inspection of Motors Vehicles up to 10 ton trucks
EDUCATION:
Ashwood University
M.B.A. Quality Management
University of Wisconsin
B.A., Psychology
Piedmont Community College
HAVC Technology
3
Contact this candidate