Piping Engineer
Resume:
QUALIFICATIONS:
With an extensive working experience in Piping Engineering Design, Field Engineering,
•
Construction, Fabrication, Module Yards, Workface Planning, and Quality Control of various
NGL & LNG Plants located globally.
Good knowledge in piping engineering practices, applicable codes and standards, methodology
•
and project management system applicable on the project.
Good knowledge in preparation and interpretation of design drawings and project documents
•
such as isometrics, general arrangement drawing, p & id, standard pipe support drawings,
plot plans, non comformance report, material takeoff, field design changes, specifications and
etc.
Well versed in operation of latest design software’s such as Plant Design System(PDS), Smart
•
Plant Review, Microstation 2D, Navis Works as well as Microsoft Applications ( MS Access,
Word, Excel), Bechtel’s BPS, TEAMWORKS, INFOWORKS.
Working experience on Advanced Work Packaging softwares CSIM by Bentley & CWPM by
•
KBR.
Familiarity with International Codes & Standards ASME, ASTM, API.
•
Working experience on different weather conditions( tropical, cold, harsh winter, hot).
•
Basic understanding of pipe stress analysis concept including computer aided results
•
interpretation.
Proactive and positively minded professional.
•
EDUCATION:
College: Technological Institute of The Philippines
Manila, Philippines
Degree: Bachelor of Science in Mechanical Engineering
PROFESSIONAL LICENSE ACCREDITED / AFFILIATION:
Registered Mechanical Engineer PRC License Number: 0061240
Member PSME – Philippine Society of Mechanical Engineers
EMPLOYMENT HISTORY:
1) Workface Planner/Work Pack Engineer Client: Chevron Australia
CBI Constructors Pty Australia EPC: Kellog Joint Venture Gorgon
May, 2014 to January, 2015 Project: Gorgon,Barrow Island LNG
2) Piping Field Engineer Client: Gladstone Liquified Natural Gas (GLNG)
1 of 4
Restituto Sison CV/Resume
Bechtel Overseas Corporation EPC: Bechtel Corporation
December, 2012 to April 2014 Project: GLNG Module Yard, Batangas City,
Philippines
3) Piping Construction Engineer Client: Abu Dhabi Gas Company(GASCO)
Petrofac Emirates LLC. EPC: Petrofac GS JOINT VENTURE
July, 2010 to September, 2012 Project: GASCO NGL-4, Ruwais, UAE
Client: Saudi Aramco
4) Piping Engineer
Bechtel-Technip Joint Venture(BTJV) EPC: Bechtel-Technip Joint Venture
August, 2008 to November, 2009 Project: Khursaniyah Gas Plant (KGP), KSA
5) Mechanical/Piping Field Engineer Client: Sakhalin Energy Investment Company
Limited
Bechtel International EPC: Bechtel Corporation
January, 2007 to April, 2008 Project: Sakhalin II Onshore Processing Facilities,
Sakhalin Island, Russian Federation
6) Piping Design Engineer Client: Ras Laffan Liquified Natural Gas Company
Chiyoda Philippines Corporation EPC: Chiyoda Technip Joint Venture
November, 2006 to December, 2006 Project: Ras Laffan LNG Expansion Train 6 & 7
Ras Laffan, Qatar
7) Piping Line Checker/Field Engineer Client: Ras Laffan Liquified Natural Gas Company
Chiyoda Corporation EPC: Chiyoda Snamprogetti
January, 2005 to October, 2006 Project: AKG-1, RGX Train 5
8) Piping Design Engineer Clients: Oman LNG, Sakhalin Energy, RasGas
Chiyoda & EEI Corporation Projects: OLG3, RGX Train 5, Sakhalin Train 1 & 2
April, 2003 to December, 2004
9) Fabrication Supervisor Clients: Petron, Shell, Caltex
MVS Builders Projects: LPG Storage Tanks
January, 1998 to December, 2001
As a Construction Workface Planner/ Work Package Engineer(Structural,Mechanical,Piping);
Preparation and issuance of Construction Work Packages(CWP) for
•
Piping/Mechanical/Structural.
Development of Field Installation Work Packages(FIWP) which includes determining required
•
activities, resources, special conditions, quality control, and risk planning.
Assist in work package MTO and material status verification and initiate material
•
procurement as required.
Asses and determine constructability in conjunction with construction lead planner, field
•
supervision and engineering.
Reviewing of Field Installation Work Packages(FIWP) for completeness and accuracy.
•
Monitoring and controlling Field Installation Work Packages(FIWP) and advising appropriate
•
parties.
Coordinating activities with field supervision, resource coordinators, project controls, quality
•
assurance, other planners, and operation personnel.
Working closely with construction superintendent and area construction manager in
•
development, monitoring and evaluation of daily planned activities based on a 3 weeks
lookahead window of level 4 schedule.
Liason between project controls department and construction supervision work force.
•
2
As a Piping Field Engineer & Construction Engineer;
Provide a technical supports to Construction Superintendent and Supervisor.
•
Preparation of field design changes, non conformance reports, as builts, field sketches,
•
material takeoff, tie in dossiers, concession request, and other technical documents
Carries out planning of construction activities including a 2 to 3 weeks look ahead.
•
Perform field inspection of completed work and prepare inspection and test reports(ITR) as
•
applicable for piping pressure test released.
Inspection of flange joint bolt up to ensure compliance with prevailing Project Flange
•
Management Program and Code minimum requirements.
Review and approval of Pressure Test Packages.
•
Resolve’s sub contractor’s technical queries.
•
Perform a joint inspection with client for sub system completeness and turn over.
•
Provide technical justification as applicable in closing out of client engineering punch list.
•
Proactive in conducting People Based Quality training for Piping Crafts.
•
Monitors piping material availability and raised required material delivery schedule
•
adjustment to met project schedules.
Perform basic engineering calculations such as thermal movements, wall thickness,
•
reinforcement pads, and torque values as required on the project.
Extraction of model 3D model shots using Smart Plant Review for constructability planning.
•
Day to day monitoring of piping installation progress making sure that adequate data are
•
forwarded to Project Controls.
Strictly observing HSE Rules and Programs.
•
As a Piping Design Engineer:
• Preparation and development of piping layouts including material selections based on P & ID and
Piping Class Specifications.
• Preparation and development of standard and special pipe support drawings.
• Checking and review of isometric drawings, standard pipe support drawings, and general
arrangement drawings from pre-stage to final stage prior to issuance for construction.
• Piping and equipment modeling using Plant Design System(PDS).
• Daily design layout check using Smart Plant Review(SPR) to avoid significant interference.
• Continuous coordination with discipline interfaces to ensure that affecting design changes are
incorporated.
• Preparation of initial loading data required for structural design.
• Works on nozzle, ladders, and platform orientations.
• Pipe support consistency checking referred from stress calculation requirements.
• Involvement in generation of Piping Material Class.
• Performs basic engineering calculations ( wall thickness, reinforcement pads, thermal movements).
COMPETENCY/SKILLS:
Operation of Intergraph’s SPR-Smart Plant Review, Plant Design System(PDS), MicroStation
2D, Auto CAD.
Good drafting skills and techniques manual and CAD: orthographic, isometric, schematics.
Piping material take-offs and estimates.
Knowledge on material selection/substitution conforming to piping material specification.
Good working knowledge of interpretation and usage of discipline design documentation.
Interpersonal, communication, people management and leadership skills.
Ability to work to the highest levels of customer service, confidentiality, and ethical behavior.
3 of 4
Restituto Sison CV/Resume
Proactive approach to decision making process. Ability to identify, analyze and resolve complex
technical problems.
Self-motivated with the ability to work with minimum supervision.
Familiar with international standards ASME, ASTM, API.
With knowledge on client standards and specifications; GASCO, Saudi Aramco, ADCO,
RASGAS.
Windows and MS Office applications: Word, Excel, Outlook, Access, PowerPoint and Lotus
Familiarity on Bechtel’s (Standard Work Process Procedures (SWPPs), BPS-Bechtel
Procurement System, INFOWORKS, TEAMWORKS
AMOGH, WinPCS and Documentum by Petrofac
Idocs by CBI
CSIM, CWPM by KBR
Knowledge in Primavera P6
PERSONAL DATA:
Birthdate: May 17, 1976 Weight: 162 lbs.
Birthplace: Pangasinan, Philippines Status: Married
Age : 38 years old Re ligious Affiliation:
Christian Protestant
Height: 5’ 9”
4
Contact this candidate