Polymer Engineering-Chemical Engineering
Resume:
CURRICULUM VITAE
Personal Data:
Name: Ismaeel Moslam Alwaan.
Date of Birth: 20/3/1971.
Nationality: Iraqi
E-Mail: ********@*****.***
******.*********@******.***.**
Work address: University of Kufa /College of Engineering/Materials
Engineering Department/Najaf/Iraq.
Phone: 00964 - 33 – 610752 Mobile Phones: 009************
Academic Qualification:
(1) first University Degree ( Bachelor,s or equivalent ):
Name of Degree: Bachelor's Date degree awarded: 15/8/1991.
College: College of Engineering/Chemical Engineering.
Name and location of university:Baghdad University/Iraq/ Baghdad.
Period: 4 years.
Specialization: General.
(2) Second University Degree (Master's or equivalent ):
Name of Degree: Master Date degree awarded: 3/5/1995.
College: College of Engineering/Chemical Engineering department.
Name and location of university:Baghdad University/Iraq/ Baghdad.
Period: 2 years.
Specialization: Polymer Engineering.
Title of Thesis: Plastic – Metal Adhesive.
(3) Third University Degree (PhD's or equivalent ):
Name of Degree: PhD Date degree awarded: 1/7/2014
College: Faculty of Chemical Engineering/Polymer Engineering
Department.
Name and location of university: University Technology Malaysia/Malaysia.
Period: 2.5 years.
Specialization: Polymer Engineering.
Title of Thesis: Preparation and Properties Of Metallocene Linear Low
Density Polyethylene/Natural Rubber/ Epoxidised Natural
Rubber Composites
(4) Baccalaureate degree:
Name of Degree: Baccalaureate for the preparatory school.
Date degree awarded: 1987.
Name and location school: Al-Najaf secondary school for boy/Iraq/Najaf.
Period: 3 years.
Specialization: Scientific Section.
Language: English and Arabic
Computer Use:
(1) I taught the following applied programmers:
(i)AutoCad. (ii)Excell (iii) Word (iv) access (v) power point
(2) I taught the following systems programmers:
(i) All Versions of Windows. (ii) DOS.
(3) I taught the following programmers languages:
(i) Basic (ii) Fortran (iii) C-Language (iv) Pascal (v) D.Base
(vi) Q.Basic (Vii) V.Basic .
(4) I have experience on the following programs:
(i ) ANSYS (ii) MATHLAB
Employment History:
First:
Job Title: General Organization of Tires industry/Iraq.
Period: from 10/09/1991 To 02/09/1997.
Scientific Rank: Consultations and Supervision.
The Missions of Work: Train the labors and make researches to improve the
Tire quality.
Second:
Job Title: The University of 7 October /College of preparation
teachers/Libya/Beni Walid.
Period: from 1/10/1997 To 1/9/2006.
Scientific Rank: Lecturer.
Nature of Work: Lecturer for chemistry, physical and computer departments.
The Missions of Work:
(1) Teaching the following subjects for chemistry department:
(i)Physical chemistry I (ii) Physical chemistry II (iii) Physical
chemistry III (iv) Analytical Chemistry (v)General chemistry
(vi) Biochemistry.
(2) Teaching the following subjects for physical department:
(i) Physical chemistry (ii) thermodynamics (iii) General chemistry
(iv) Fortran Language (v) Basic Language.
(3) Teaching the following subjects for computer department:
(i) Basic Language (ii) Fortran Language (iii) D.Base Language.
(4) Supervisor for many undergraduate researches.
Third:
Job Title: The University of 7 October /College of Engineering/Libya/Beni
Walid.
Period: from 1/9/2006 to 1/9/2007.
Scientific Rank: Lecturer.
Nature of Work: Lecturer for Civil, Electrical and Mechanical engineering
departments.
The Missions of Work:
Teaching the following subjects for Civil, Electrical and Mechanical engineering
departments:
(i ) Mathematical I, II (ii) Materials Properties
(iii) Supervisor for undergraduate researches.
Fourth:
Job Title: The University of Kufa /College of engineering/Iraq.
Period: from 8/9/2008 to Now.
Scientific Rank: Lecturer.
Nature of Work: Lecturer for Materials and Mechanical Engineering
Departments.
The Missions of Work:
Teaching the following subjects for Materials and Mechanical Engineering
departments:
(1) Thermodynamics (2) Microsoft office programs (3) Visual Basic (4)
Polymer Technology (5) Engineering Drawing (6) Supervisor for postgraduate
and undergraduate students.
Research Interesting:
Nanocomposite materials, kinetics of polymer degradation, thermodynamic of
polymer by DSC, crystallization kinetics by DSC, electrical insulating materials,
morphology, properties of polymer, biopolymer and adsorption.
Publications:
[1] Effect of Zinc Borate on Mechanical and Dielectric Properties of
Metallocene Linear Low Density Polyethylene/Rubbers/ Magnesium Oxide
Blend for Wire and Cable Applications. Iranian Polymer Journals. In Press
[2] I. M. Alwaan and A. Hassan. Pyrolysis, Kinetic and Kinetic Model Study of
Epoxidized Natural Rubber. Progress in rubber plastics & recycling technology
journal, V(30), No(3), p.153-168, 2014 (Thomson Reuter and Scopus indexes)
[3] I. M. Alwaan, A. Hassan and M. A. M. Piah. Effect of Natural
Rubber/Epoxidized Natural Rubber (90/10) on Dielectric Properties and
Crystallization of Metallocene Linear Low Density Polyethylene. Polymers and
Polymer composites Journal. In Press.
[4] I. M. Alwaan and A. Hassan. Effect of N, N-M-Phenylenebismaleimide on
Thermodynamics Properties of Epoxidised Natural Rubber by Using Differential
Scanning Calorimeter. Progress in rubber plastics & recycling technology
journal, V(30), No(3), p.169-184, 2014 (Thomson Reuter and Scopus indexes)
[5] I. M. Alwaan, A. Hassan and M. Jawaid. Effect of Natural
Rubber/Epoxidized Natural Rubber (90/10) on Mechanical and Thermal
properties of Linear Low density polyethylene. Journal of polymer materials,
Vol 30, No. 1, 2013, 117-130, (Thomson Reuter and Scopus indexes)
[6] I. M. Alwaan and A. Hassan.The effects of magnesium oxide on the thermal,
morphological, and crystallinity properties of metallocene linear low-density
polyethylene/ rubbers composite. Journal of polymer engineering, 33(3): 229-
238, 2013 (Thomson Reuter and Scopus indexes)
[7] I. M. Alwaan and A. Hassan. Effect of Zinc Borate Loading on Thermal
Stability, Flammability, Crystallization Properties of Magnesium Oxide/ (90/10)
Metallocene Linear Low Density Polyethylene/Rubbers Blend. Iranian polymer
journal, Volume 23, Issue 4, pp 277-287, 2014 (Thomson Reuter and Scopus
indexes)
[8] I. M. Alwaan. Kinetics of Thermal Degradation of Recycled Polyvinyl
chloride Resin. International Journal of Chemical Engineering, Volume 2014,
Article ID 701092, 7 pages. http://dx.doi.org/10.1155/2014/701092 (Scopus
index).
[9] I. M. Alwaan. A Study on the Adhesion of Styrene-Butadiene Rubber with
Red Kaolinite on Aluminum Surface. ISRN Chemical Engineering, Volume
2014, Article ID 212567, 6 pages.
[10] Ismaeel Moslam Alwaan," The Kinetic of Thermal Degradation For
Manufactured High Density Polyethylene (HDPE)", the Iraqi journal for
mechanical and materials engineering, Vol (10), No (3),2010.
[11] Ismaeel Moslam Alwaan," Study Mechanical and Chemical Properties of
prepared Starch – Urea Adhesive Resin", Journal of Kufa for Chemical Science,
Vol(1),NO(1), 2010.
[12] Ismaeel Moslam Alwaan," Investigation of thermal Reaction Kinetic for
manufacturing Urea-Starch Resin: hydrochloric acid catalyst", 2nd International
Conference on Production and Industrial Engineering CPIE, India, 2010.
[13] Ismaeel Moslam Alwaan, "Investigation of Reaction Kinetic for Pure Zinc
with Sulphuric Acid ", International Journal of Arts & Sciences (IJAS)
conference, Austria, 2011.
[14] Ismaeel Moslam Alwaan, "The Experimental and Theoretical Reaction
Kinetic Investigation of Mild Steel with Sulphuric Acid ", NPC 2011 : National
Postgraduate Conference 2011, Malaysia,19-20 September, 2011.
[15] Ismaeel Moslam Alwaan, Azman Hassan " Effect of Different Rubber
Loading on Thermal properties of metallocene Linear Low density
polyethylene", 2013 The 3rd International Conference on Advanced Materials
Research Dubai, UAE, January 19-20, 2013.
[16] Ismaeel Moslam Alwaan, Azman Hassan " Investigation of Thermal
Reaction Kinetic of Tire Tube Resin", 8th Asian-Australasian Conference on
Composite Materials(ACCM-8),6 – 8 November 2012,Kuala Lumpur, Malaysia.
[17] Ismaeel Moslam Alwaan, Azman Hassan "Thermal Decomposition and
Kinetic Study of Epoxidized Natural Rubber", 8th Asian-Australasian
Conference on Composite Materials (ACCM-8),6 – 8 November 2012,Kuala
Lumpur, Malaysia.
[18] Ismaeel Moslam Alwaan," Studying the Thermal Degradation of Urea -
Starch Resin" 2nd conference of college of technique /Najaf 2010
[19] Ismaeel Moslam Alwaan, "Study the corrosion of iron alloy kind V340 in
the acidic, alkaline and neutral media", 2nd conference of Kufa University
/Najaf, 2010.
[20] I. M. Alwaan and A. Hassan. Effect of Magnesium Oxide Loading on
Mechanical, Crystallization and Morphological Properties of 90/10 Metallocene
Linear Low Density Polyethylene/Rubbers Blend. Chinese Journal of Polymer
Science (Springer). Under Review.
[21] I. M. Alwaan, A. Hassan and M. A. M. Piah. Effect of Magnesium Oxide
Loading on Dielectric and Crystallization Properties of 90/10 Metallocene
Linear Low Density Polyethylene/Rubbers Blend. Jou rnal of Applied Clay
Science. Under Review.
Additional Papers were completed and will be submitted to the Journals:
[22] I. M. Alwaan and A. Hassan. Effect of OMMT Loading on Mechanical,
Crystallization and Morphological Properties of 20 phr MgO/( 90/10)
Metallocene Linear Low Density Polyethylene/Rubbers Blend. Iranian Polymer
Journal (Springer).
[23] I. M. Alwaan, A. Hassan and M. A. M. Piah. Effect of OMMT Loading on
Dielectric and Crystallization Properties of 20 phr MgO/(90/10) Metallocene
Linear Low Density Polyethylene/Rubbers Blend. Journal of Applied Clay
Science.
[24] I. M. Alwaan and A. Hassan. Effect of OMMT Loading on Thermal
Stability, Flammability, Crystallization Properties of Magnesium Oxide/ (90/10)
Metallocene Linear Low Density Polyethylene/Rubbers Blend. Journal of
Applied Clay Science.
[25] I. M. Alwaan and A. Hassan. Effect of OMMT Loading on Mechanical,
Crystallization and Morphological Properties of 6 phr ZB/20 phr MgO/(90/10)
Metallocene Linear Low Density Polyethylene/Rubbers Blend. Iranian Polymer
Journal (Springer).
[26] I. M. Alwaan, A. Hassan and M. A. M. Piah. Effect of OMMT Loading on
Dielectric and Crystallization Properties of 6 phr ZB/20 phr MgO/(90/10)
Metallocene Linear Low Density Polyethylene/Rubbers Blend. Journal of
Applied Clay Science.
[27] I. M. Alwaan and A. Hassan. Effect of OMMT Loading on Thermal
Stability, Flammability, Crystallization Properties of 6 phr ZB/20 phr
MgO/(90/10) Metallocene Linear Low Density Polyethylene/Rubbers Blend.
Journal of Applied Clay Science.
Books
[1] Ismaeel M. Alwaan. Preparation and Studying of Degradation Kinetic of
Urea-Starch Resin, Akademiker Verlag,VDM Verlag Dr Muller with ISBN:
978-3-639-37024-9, 2011.
[2] Ismaeel M. Alwaan. Thermodynamics Data for Polymer: Part 1. Akademiker
Verlag,VDM Verlag Dr Muller. Under Review
[3] Ismaeel M. Alwaan. Thermodynamics Data for Polymer: Part 2. Akademiker
Verlag,VDM Verlag Dr Muller. Under Review
[4] Ismaeel M. Alwaan. Thermodynamics Data for Polymer: Part 3. Akademiker
Verlag,VDM Verlag Dr Muller. Under Review
Reviewer in Journals
I have worked reviewer in the following journals
[1] Starch Journal
Impact Factor: 1.401
ISI Journal Citation Reports © Ranking: 2012: 62/124 (Food Science &
Technology), Online ISSN: 1521-379X
Web site: http://onlinelibrary.wiley.com/journal/10.1002/%28ISSN%291521-
379X
[2] International Journal of Scientific Research in Chemical Engineering
(ISSN: 2345-6787) is a Peer-Reviewed Journal (www.ijsrpub.com)
[3] International Journal of Chemistry and Material Science (IJCMS)
(ISSN 2327-5553) Impact Factor (UIF) (0.7777)
[4] International Journal of Scientific Research in Environmental
Engineering (ISSN: 2345-6787) is a Peer-Reviewed Journal
www.ijsrpub.com/ijsrce
[5] British Journal of Applied Science & Technology
http://www.sciencedomain.org/journal-home.php?id=5
[6] Malaysian Polymer Journal. http://www.cheme.utm.my/mpj
[7] International Conference on Biomedical Engineering and Biotechnology
(iCBEB2014). http://www.icbeb.org/papersub/expert/Register.aspx
[8] International Conference on Residuals Science Technology (ICRST
2014). http://www.ic-rst.org/home.aspx
Contact this candidate