DOMINIC P. REBENQUE
Experience: ** years
Nationality: Filipino
Passport no. XX5076918
Email: *********@*****.***
Age: 38 years old
January 2010 - Dec. 2014 (4 years)
HVAC Technician
Yousef M. Al-Dossary & Sons holding group of company.
(Industrial and Real State)
Dammam Saudi Arabia
• Maintained and Repair York Aircooled Screw Chiller 150-515 TR (525-1,750 kW) at Al-Dossary Tower, Furnace luxury Hotel and Appartment building with HVAC Unit Carrier, York, Zamil package Units 5TR-20TR for Al.-dossary Real State Division and for Industrial Plant Chiller Green box, Piovan chiller and Domnick Hunter Air compressor, for Anjad and Banjer plastic factory and Al Sharq Polysterene factory Cooling tower, Boiler Omnecal fire tube 5TR and Machine control cooling system.
• Repairs and replace associated equipment, such as compressors, air handling unit, fan coil unit, blower motor, fan motor, pumps, ventilating fans, burners, air compressor, machine Colling system, and air conditioning control systems.
• Ensure smooth functioning of all BMS Systems. maintaining Of fire fighting system, intelligent fire Detection System, kilowatt system monitoring, maintaining daily kilowatt report & submit the kilowatt consumptions to client, Preventive maintenance of Electrical Feeder, EPDB, NPDB, panel, Ups, Variable Air Volume Controller. BMS system Metasys [Made by Johnson Controls] Software
• Replaced and installed units in small and large heating, ventilating airconditioning systems, such as package unit,split centralized,ceiling concield, split unit, window unit all types with brand name of Samsung, LG, Carrier, General, Trane, Zamil, Gree, and Panasonic for Housing compound, school, office building and accommodation.
• Lay out copper pipes performed brazing, vaccuming of the system, charging, pump down and proper disposal of freon gas using recovery equipment, using of hand tools gauges, clamp ammeter, leak tester, barometer, digital infrared temperature reading instrument, and Install wiring connection, thermostats, ac control board, PCB sub assembly, contactor, relay, and other controls, Inspects, calibrates, follow blue print and design specification to install Hvac system.
• Maintained the safety and the environmental regulations in the work area.
• Ackquired Saudi driver licence.
Sept 2008 - Nov 2009 (1 year 4 months)
Operation Technician
United group services Ltd
(ASPIRE) Orthopedic Hospital
Doha Qatar
• Monitor (BMS) operation and performed emergency connections to neutralize alarm conditions and restore proper operation.
• Responds to emergency and routine service calls to provide restoration of mechanical systems operation and control with a minimum of downtime.
• Record check sheet for critical equipment such as booster pumps, sewage sump pumps, medical gas, generator, emergency chiller, Ahu's,Ups, Electrical Fdr, Power DB, Light, Cctv, Music/PA system, & Fire Detection System.
• Provides technical instruction and training to other technicians, contractor and personnel on basic theory, proper system operations, preventative maintenance, troubleshooting techniques, typical system failures, and corrections.
• Attend Toolbox meetings to establish scope of work activities such as safety requirements permits to work, special tools and materials.
• To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures.
Jul 2006 - August 2008 (2 years 1 months)
Home Appliance and Hvac technician
Mansour Al Obaid for Contracting Establishment.
(MOFA) Housing Project
Riyahd Saudi Arabia
• Maintained stocks of parts used in on-site installation, maintenance, and repair of appliances and air-conditioning unit in villas, school and facilities inside the housing compound.
• Performing team leadership for conducting preventive maintainance for mechanical and electrical department and follow PPM Manager schedule in every villa.
• Installed and repairs compressor, fans, blower motor, cooling coil unit, heating element, associated parts of heating ventilation airconditioning, refrigerators, washing machines, drier, and stoves.
• Cleaned, lubricated, and touched up minor defects on newly installed or repaired appliances and diagnose electrical and mechanical defects.
• Disassembled appliances so that problems could be diagnosed and repairs could be made, leveled refrigerator, adjusted doors, and connect water lines for washing machine, using proper hand tools.
• Report promtly to project manager regarding pending work order, preventive maintenance schedule, tenant complain, request for new appliances and supervision for night shift electrical and mechanical department.
May 2004 - July 2005 ( 1 year and 2 months)
Refrigeration and Kitchen equipment technician
Top Ideas Food Corporation
Banawe San Fransisco Delmonte Quezon City Philippines
• Maintained, repair, and installation of refrigerated equipment and kitchen concession equipment in Tempura Japanese restaurant, Flavor of China and Karate kid fast food outlet all over Metro Manila and Luzon area.
• Diagnosed electrical and mechanical defects of refrigerated display cabinet, commercial ice machines, reach in frezzer, glass door refrigerator, and walk in chiller, commercial ranges and hood and gas deep fryer adjusted pilot lights and examined valves and burners for gas leakage and specified flame.
• Replaced and install compressor, fan and blower motor, digital thermostat, controls, transformer, expansion valve, strainer drier, capasitor, relay, contactor and heating element, checked temperature setting and set point to ensure proper working of refrigerated equipment and lay out pipe for plumbing works decloged drainage system and replace damage wash basin and tiles for mason work repainting in every food outlet and restaurant.
Dec 2000 - April 2004 ( 4 years and 4 months)
Refrigeration And Aircon Technician
Don Bosco Technical College
Mandaluyong City Philippines
• Repairing the refrigerator and airconditioner which include all electronic and mechanical parts, performed quarterly preventive maintenance for all window unit, split unit and package unit.
• To do stress testing and run time testing of repaired parts, fan motor, blower motor, compressor, monitor running condition of repair window unit before re installed to the classroom and offices.
• Welding and Brazing, copper pipe lay out for installation of new split unit and package unit, Evacuation of refrigerant system, charging of freon and observe running condition.
• Installed and repaired air condition equipment in school buildings, offices, clinic, sport facilities, and auditorium maintaining of equipments cleaning condenser, evaporator, changing air filters, oiling the parts and tightening wiring connection.
• Building wiring and installation replaced damaged magnetic switch, magnetic contactor, thermostat control, relay, capasitor, fuse box and other electrical defective parts.
• Inspected the air conditioning system regularly to ensure that it is working according to the manufacturer’s specification.
• Maintained the safety and the environmental regulations in the work area.
Jul 1998 - Dec 1999 (1 year 5 months)
Service Technician
HKR Equipment Corporation
Makati Philippines.
• Maintain documentations of equipment installation, testing and maintenance procedures for henny penny fryers, blodget oven, del field preparation table, ice maker, ice cream maker, dolcevita coffee maker, holding cabinet, toaster, steamer, and concession equipment.
• Work independently or in a team environment to complete assigned tasks.
• Analyze root causes of equipment failures and recommend corrective action plans.
• Repair and replace service parts of the equipment such as control board, compressor, fans motor, and associate parts of oven, fryer, frezzer, ice maker, coffe maker and other.
• Perform regular inspections to correct equipment malfunctions and parts replacements.
• Monitor equipment operations and report any problems to Supervisor promptly.
• Operate equipment safely and effectively for maximum efficiency.
EDUCATION
Don Bosco Technical College
Vocational Diploma / Short Course Certificate
Major:Refrigeration and airconditioning mechanic
Laguna college of Arts and Trades
2 years Technical course
Major: Automotive Technology
CGPA
84.0/100
Skills: Mason, Painter, Plumbing, Electrical
TRAININGS/SEMINARS
Mar 3, 2006- Apr 4, 2006
Pc Operation National Certificate Level II
Mr. Deegee de Guzman - Information Systems and Technology Center.
Jul 30, 2002- Aug 6, 2002
Lathe Machine Operator
Mr. Elso Clarete - Center for Researh and Training.
Jan 30, 2000- Jan 21, 2000
Basic Shipboard Food Service Management
Capt. Eduardo V. Roco - Phil. Nautical Traning Center.
Jul 19, 1999- Jul 30, 1999
Basic Safety Course
Engr. Alfredo V. Gomes - Albatross Foundation Academy
REFERENCES
Engr. Al Cagaoan: MSTC Director Don Bosco Technical College Tel.No.: 531-8081 Local 1610 Relationship: Friend
Fr. Louie Castaneda: Rector Don Bosco Technical Institute
Relationship: Friend
Engr. Arnel Lacap: Site Engr. Aldossary group
Relationship: Friend
About Me:
Gender: Male
Height: 5’10
Weight: 89 kg
Address: 121 Sitio Yakal Brgy. Labuin Sta.cruz Laguna, 2009, Central Luzon, Philippines
Back to Top