Electrical Mechanical

Jack C. Hoskin

**** ********* *****, *********, ** 92506

email: **********@*****.*** 760-***-****

Qualifications:

More than 13 years of Electrical, Mechanical, Pneumatic and Electronic Experiences.

More than 5 years of Gas Plasma Experiences.

Knowledgeable in Lead Management (Manufacturing), Master Scheduling (APICS) and ISO 9001.

Able to read blueprints, schematics, pneumatics and wire diagrams.

Strong experience in working with International location and support project engineers R&D activities.

Conscientious, energetic and creative. Adapt easily to new concepts and responsibilities.

Exceed deadline expectations. Self-motivated, able to work independently or a team member to meet deadlines.

Strong leadership, management skills and computer literate both in hardware and software.

Excellent written and oral communications skills.

Clearance: Top Secret.

Languages: English, Italian and some Spanish.

Experience:

02/11- 12/13 Electrical Mechanical, Masionary & Plumbler

Siciliana Costruzioni, Via Bondi 3, Termini Imerese (PA), 90018 Italy

Repair and restoration on residential properties. Skilled in demolition and construction work including preparing layouts and

erecting frameworks.

In depth knowledge of operating general construction equipment. Experience in tending machines that pump grout and cement.

Keen understanding of erecting concrete and scaffolding following instructions.

Skilled in insulation, masons, painting, plumbing, roofing, tiles, carpentry, drywall (sheetrock) and electrical wiring systems in

residential buildings.

Experience in assembling, modifying and installing PVC and metal pipes, valves and fixtures along with supports and hangers and

other related equipment.

11/09- 06/10 Electrical Mechanical Test Technician

Delta Design a Cohu Company c/o PEAK Technical Service, 12367 Crosthwaite Circle, Poway, CA 92064 USA

Responsible in testing and troubleshooting Pick & Place Matrix Handlers required to evaluate standard.

Responsible for performing a wide variety of electronic, electrical, mechanical, heating / cooling, and pneumatic.

Works on assignments that are extremely complex in nature where a high degree of independent judgment, initiative and technical

knowledge are required to resolve problems. Responsible for set up, monitoring and record equipment performance.

Troubleshoot using schematics, wire diagrams, manuals, multimeter, tools and related equipment.

Support engineering R&D activities on design, layouts, testing and modification to improve performance and cost reduction.

Responsible in conducting a wide range of electronic, electrical, mechanical, pneumatic, heating /cooling and computers opertation.

Follow procedures and sequence of operations such as pre-check list prior to power up, AC / DC power supply and UPS, computer

programming, alignments and calibration on conveyors & gantry, installation and testing sensors (inductive, magnetic, thru-beam

transmitters and receivers), checking the tri-temperature (hot & cold), servo motors for X, Y & Z axis and temperature boards.

Responsible in manufacture of cable, wire and harness assemblies.

05/09- 10/09 Electrical Mechanical Level 4

CO.I.FER. S.R.L. Via Natale Tommaso, 135/A– Palermo (PA), 90147, Italy

Responsible performing a wide variety of electronic, electrical, mechanical and computers on ship building.

Responsible for the installation of electrical equipment and the issues relating to the application of electrical,

mechanical, and electronic wire and cable assembly, installation of pipes fitting (metal and PVC), installation and testing

of sensors (inductive, magnetic, and emitters receivers thru-beam), the Altivar 31 computer programming (variable

speed-variable speed drive) and IFM Electronic monitor FS-3, and install / test (test) remote control for crane and trolley.

Managed a team of pipeline, mechanical, electrical and welding.

Translator for English clients on issues or additional task to complete each phase on the construction.

11/07 -01/08 Electrical Mechanical Level 3

Nordex c/o S.C.M. S.r.l. Sicilana Costruzioni e Montaggi (Sicilian Constructions and Assemblies),

Via Falcone e Borselline, 85, Termini Imerese (PA), Sicily, 90018, Italy.

Responsible for installing the N90/2500 kW wind turbine energy system (Nordex product) for the Greentech Energy Systems A/S.

Duties include routing cable lines and connecting, aiding coworkers on translating the English written manuals to Italian,

installation phase of the tubular tower, and quality control from the wind turbine generator, transformer, controls to the

lower level of the tower.

02/98- 03/07 Production Associate Level 3 / Distribution Associate (Electro-Mechanical Assembler)

Asymtek / March Plasma a Nordson Company, 2762 Loker Avenue West, Carlsbad, California, 92008 U.S.A.

Supervised and trained coworkers to achieve assignments using established guidelines, procedures and policies.

Responsible for performing a wide variety of electronic, electrical, mechanical, and pneumatic assemblies and sub-assemblies

on automation fluid dispensing units. Determines, follows methods, procedures and sequence of operations in performing wire &

component installation, display control panels, build varies modules (power supply AC/DC, conveyor, interface, X & Y axis,

control), computer hardware and software installation, RF tuner controls, interface printed circuit boards, programmable controllers

(PLCs), temperature boards, alignment & calibration conveyors & gantry, sensors, servo motors, and End of Line testing on the

following units: Asymtek Millennium & X-1000 Axiom, and March Gas Plasma Legacy, I-TRAK and FlexTRAK.

Responsible to monitor and operate different form of gases to produce gas plasma (the fourth state of matter).

Support engineering activities such as design improvements, layouts, testing, modification, fabrication, assembly of prototype

electro-mechanical and pneumatic systems, collect data, and experimental design circuitry. Performs operational testing and actions

to remedy malfunctions (troubleshooting) RF, Analog, Digital, Interface, and Computer Circuits to component level. Use

manufacturing, development or diagnostic equipment, operates special equipment, including, but not limited to, test programs, signal

generators, multimeter and specialized test apparatus. Use all standard, metric and pneumatic tools.

Responsible in manufacture of cable, wire and harness assemblies. Producing crimped, mechanically secured, or soldered

interconnections and the related assembly activities associated with cable and harness assemblies that is required on IPC-A-620.

Responsible in performing lead free connections, soldered requirements terminals, soldered connection requirements for plated-

through holes, surface mounting criteria for chip components, leadless and leaded chip carriers, swaged hardware and heatsink

requirements of mechanical assemblies, component mounting criteria for DIPS, socket pins and card edge connectors, jumper wire

assembly requirements, solder fillet dimensional criteria for all major SMT component groups, soldering such as tombstoning,

dewetting, and replacing damage components, laminate conditions, cleaning and coating (Flux) that is required on IPC-A-610.

Experienced in the introduction and implementation of 6S and Lean Manufacturing concepts. Served as Lead Developer on a six-

person team charged with building a production platform.

Responsible for creating "Sequence of Events" and "Operational Method Sheets" procedures & drawings by shooting/editing digital

pictures and incorporating them into the MS Word and Excel for documentation for a new "Demand Flow" production line of Fluid

Dispensing and Gas Plasma units. This involves working with Solidworks, CAD drawings, wire diagrams, schematics, written and

verbal descriptions, documenting build order (B.O.M.- Build of Material), and Total Quality Control information.

Review schedules to ensure materials are available (Material Requirements Planning-MRP and Enterprise Resource Planning -ERP).

Responsible for set up, monitoring and record equipment performance.

Computer literate both in hardware and software: Microsoft Windows, Word, Office, Outlook, Excel, FMW (FluidMove) & FMNT,

Adobe Acrobat, Dataflo ERP, Maxcim database and Master Control.

09/79-06/88 Electrical Power Production Specialist & Food Service Specialist

United States Air Force, 831st Civil Engineer Squadron, 63rd Service Squadron, California, U.S.A.

More than four years’ experience as an Electrical Power Production Specialist. Responsible for field repair processes in

Power Generation. Traveled worldwide as a field repair technician to provide customer service up to 650KW stationary

generators.

Performed inspection, install, operate, and maintenance phases on all types of power generation and emergency arresting barriers.

Troubleshooting and repaired 10KW to 850KW mobile and stationary emergency generator units, Control Panels, Generation

Equipment Engine Systems, Automatic Transfer Switchgear, Universal Power Supply units (UPS), Over/ Under Fill Systems, Pipe

Lines, External Power Lines, Transformers, and the MA-1A / BAK-9 / BAK-12 Aircraft Arresting Barrier Systems.

Maintained and consolidated records such as On The Job Training. Performed initial evaluation of all enlisted/civilian.

Education/Relevant Training:

Community College of the Air Force - Air University, Technical Training Center, Texas USA

Management - Diploma.

Electrical Power Production (3rd Level) & Electrical Power Generating Equipment (7th Level)- Certificates.

San Diego State University, American Production & Inventory Control Society (APICS), San Diego CA.-Certificate.

Riverside Community College (R.C.C.), 4800 Magnolia Ave., Riverside, CA. 92506 (USA); Astronomy

Asymtek a Nordson Corporation, Carlsbad, CA. (USA). Certificates: Millennium Operations Level 1;Troubleshooting

Level 2; Fluid Dispensing Software Configuration Lvl 3 & 4; Lean Management; ISO 9001; Production Associate

Level 2 & Level 3 (cover all aspects including IPC-A-610 & IPC-A-620); Safety (MSDS); First Aid & C.P.R.; LiftTruck.

Notre Dame High School, 7085 Brockton Avenue, Riverside, CA. 92506 (USA); Mathematic.1975-1979 Diploma

United States Air Force Certificates: Supervisors Safety; Prime RIBS/BEEF Contingency I & II.

Contact this candidate