Maintenance (mechanical / electrical / instrument)

SAIFULLAH

JAMALUDDIN

SNR TECHNICIAN

(Mech./Elec.) / MECH.

TECHNICIAN / MECHANIC /

MECHANICAL ENGINEER

PERSONAL PARTICULARS

ADDRESS:

CARIMIN EQUIPMENT MANAGEMENT

SDN.BHD

LOT 3691, KAW. INDUSTRI TELOK

KALONG MEIL,

24007 CHUKAI

KEMAMAN,TERENGGANU

CONTACTS:

Mobile: +601******** (Malaysia)

Email 1: *********@*******.***.**

Email 2: *******@*****.***

DOB: 29th January, 1981 (32 years old)

MARITAL STATUS : Married

GENDER: Male

NATIONALITY: Malaysian

LANGUAGES:

Oral – English, Bahasa Malaysia

Written – English, Bahasa Malaysia

BACKGROUND HISTORY

Since graduation 2006, Saifullah has ~7

years working experiences which include

~5 years experience related to Oil and

Gas Industry. He start his career with

freelance that join some oil & gas

company such as Highbase Strategic S/B,

Local Engineering S/B, Sarku Engineering

Services S/B and etc. He also have been

worked as Engine Man (Greaser) with

company name Jasa Merin S/B. Working

in supply boat that responsible to make

engine services, control all engine

parameters and controlling engine

system.

He is well knowledge on rotating

equipment system especially Genset, Air

Compressor, Welding Machine and Pump

(engine driven) with a range of

mechanical systems, engine electrical

systems and engine controlling systems.

The knowledge of this field including

engine assembly, engine alignment,

installing engine accessories with

electric/electronics systems such as

safety devices, fabricating fuel system,

fabricating cooling system, engine start-up

procedures, engine performance test and

some modification as per client request.

QUALIFICATIONS & PROFESSIONAL

MEMBERSHIP

• Diploma in Industrial Automation

Page 1 of 11

(Mechatronics), Terengganu

Advanced Technical

Institute(TATI), 2005.

• MARA Kulim College, 2000

• MRSM Serting, Negeri Sembilan,

1998

WORKING EXPERIENCES

Company: Carimin Equipment

Management Sdn. Bhd.

(CEMSB)- (Nov 2012 –

Present)

Position: Mechanic (onshore /

offshore)

Product: Diesel Generator Set, Diesel-

driven air compressor,

Diesel Engine-driven

Welding Set and Portable

Fire

Water pumps.

Carimin Equipment Management Sdn.

Bhd. (CEMSB) is one of company from

Carimin Sdn. Bhd. Group locate at

Kemaman that do Equipment Rental &

Maintenance for their main business.

Actually it is supporting company to others

Carimin’s company responsible to

supply,rental and maintenance all

equipment used in Hook-Up &

Commissioning projects, Marine Support

Services (offshore transportation and

support vessels), Fabrication &

Construction (fabrication and construction

of marine structures and other Oil and

Gas amenities which cover electrical and

instrumentation of offshore facilities) and

Facilities Maintenance (Pre-emptive

maintenance and/or repair works for Oil

and Gas projects with focus on marine

facilities).

Job Scope:

Onshore (Maintenance Yard)

• Responsible to make sure all

equipment is in good

condition and ready to use.

• As a team leader to manage

team doing maintenance work

and technical advisor for

troubleshooting work.

• As a focal person to inspect

equipment with client and

responsible to ensure that

equipment fit / unfit to use.

Prepare the ‘Green Tag’ if

equipment fit to operate by

client.

Maintenance Work:

• General Service for diesel

engine (change oil filter, fuel

filter, fuel water separator,

engine oil, engine belting)

• Diesel engine top overhaul and

major overhaul.

2

• Check for rotating and all moving

mechanical part is in right

position.

• Start-up, warming up and test

run the equipment after doing

maintenance works. Note down

all parameters while equipment

running, does maintenance

report and fill up equipment log

book.

• Responsible to make sure all

safety requirement is still valid

to use such as Magnetic Particle

Inspection (MPI) for skid using

Pad Eye, Load Test for

equipment that use skid base,

Permit Mesin Angkut (PMA) for

lifting equipment, Permit Mesin

Tekanan (PMT) especially for

equipment work with pressure

vessel and Pop-Up Test for

Safety Release Valve (SRV)

using on compressors.

• Doing maintenance on tools

such as chain block, all

hydraulic powered tool (air

grinder, air cutting saw, air driller

and etc), clamps (scaffolding

materials), forklift and all

equipment using engine driven,

compress air drive and motor

control.

Offshore

• Troubleshoot, repair, setting and

test-run equipment after repaired

job done.

• Report to person in charge and

submit technical report.

Company: UMW Synergistic

Generation Sdn. Bhd. (Sept

2010 – Oct 2012)

Position: Senior Mechanical/Electrical

Technician

Product: Diesel & Gas Generator Set,

Diesel-driven air compressor and

Water pumps.

UMW Synergistic Generation Sdn. Bhd. Is

one of Genset packager company located

at Shah Alam, Selangor, Malaysia. They

have been creating products that includes

diesel and gas generator sets, diesel-

driven air compressors, Zone 2 hazardous

area generator packages, mobile and

trailor generator packages, small diesel

gas engine power plants and engine-

driven water pumps as well as several

other products that are in demand by oil

and gas as well as utility players.

Job Scope:

Fabrication Stage( assist fabrication

department)

Mechanical

Page 3 of 11

• Build-up skid base as per design

given such:

1. Skid for engine

2. Skid for daily diesel

tank

3. Skid for alternator

4. Skid for radiator and

turbo intercooler.

• Locate the engine, alternator,

radiator and intercooler onto skid

base.

• Perform alignment works of

engine and alternator.

• Fabricate piping for cooling

system.

• Fabricate cable trunk for all cable

/ electrical route

Electrical

• Cable lay / wiring from engine

to engine panel

• Install all safety devices for

engine such as:

1. Water temperature

sender and switches.

2. Oil temperature sender

and switches.

3. Oil pressure sensor.

4. Magnetic pick-up to

monitor engine speed

and frequency.

5. Control cable from

engine panel to Auto

Main Failure (AMF)

panel.

• Lay control cable from engine

control unit (ECU), Monitoring

Diesel Engine Controller (MDEC)

or Auto Diesel Engine Controller

(ADEC) depend on engine type.

Start-up Stage (Focal Person)

• Responsible for engine system

readiness prior to start-up such:

1. Cooling system

2. Fuel system

3. Electrical system

(assist by wireman and

chargeman)

• Responsible for smooth start the

engine, setting correct speed,

frequency, voltage produce by

alternator (AVR setting), engine

safety precaution and etc.

Finishing Stage -Factory Acceptance

Test (FAT) – Focal Person

• Responsible for Genset

readiness prior for FAT and

acceptance test with client. The

activities include:

1. General check engine

4

condition

2. Set-up the engine with

load bank (install power

cable)

3. Preparation for safety

precaution if any

emergency occurs

during test.

• Perform Genset test, such as:

1. Warming-up the engine

2. Operate the load bank

to engine carry load

3. Take and record all

engine parameters

while running

4. Simulate engine safety

devices to make sure

that safety devices well

functioning

OIL & GAS PROJECT INVOLVED

1. Supply emergency diesel engine

generators for Kumang Cluster

Development project (KAKG - 1

x 1200 kW). Bintulu (start-up,

hook-up and commissioning)

2. Supply emergency diesel engine

generators for Kumang Cluster

Development project (F9JT &

KUJT - 1 x 108 kW). Bintulu -

(commissioning)

3. Supply emergency diesel engine

generators for Tangga Barat

Cluster Development project

(TBCP-A - 1 x 1500 kW).

Terengganu - (fabricated, start-

up, FAT, hook-up and

commissioning)

4. Supply and supervise installation

& erection, pre-commissioning,

commissioning & site testing of

emergency diesel generators

and its diesel engines (ABF - 2 x

1000 kw), Asean Bintulu

Fertilizer (fabrication, start-up,

FAT, hook-up and

commissioning)

5. Supply of emergency diesel

generator (EDG) for Kinabalu

non-associated gas project

(KNAG - 1 x 1500 kW). Kota

Kinabalu - Fabrication, start-up

and FAT).

Other Job Scopes:

• As a focal person for engine

troubleshooting at site (oil & gas

- platform/plant, Industry and

GLC)

• Conduct engine service and

maintenance on site with

servicing team members.

• Lead engine overhaul works with

team members

Company: Jasa Merin (Malaysia) Sdn.

Page 5 of 11

Bhd. – 3 months contract,

2010 (Freelance)

Position: Engine Man / Greaser

Jasa Merin (M) Sdn. Bhd. (JM) is a private

limited company incorporated in Malaysia

on 14th March 1980 as Jackson Marine

Sdn. Bhd. JM commenced operation in

1982 and subsequently assume its

present name in 1987. For over 25 years,

JM has been providing offshore support

vessels (OSV) services to oil majors such

as Petronas Carigali Sdn. Bhd (PCSB)

and ExxonMobil Exploration and

Production Malaysia Inc (EMEPMI).

Job Scope:

• As engine man to assist 3rd

Engineer, 2nd Engineer and

Chief Engineer.

• Prepare the engine and Genset

readiness before underway to

location (offshore - platform),

such as:

1. General check engine

condition

2. Check engine oil level

3. Enough fuel in storage

tank for underway - set-

up correct fuel tank to

engine.(Note: Usually

the boat have six (6) to

eight (8) nos. of storage

diesel tank and using

only two (2) to three (3)

tank in one trip of

underway.

• Start-up the engine and make

sure all system functioning well

before pass the engine control to

captain on "bridge"

• Record all reading of engine

parameters while underway to

location.

• Perform minor routine

maintenance job such as:

1. Cleaning oil cooler - to

make sure engine is in

good temperature while

running.

2. Check and clean water

jacket (engine cooling

system)

3. Check and clean main

strainer to make sure

clean fresh water (sea

water) flow through to

engine cooling system.

4. Check and service

fresh water maker.

• As a technician in boat that

perform maintaining boat

electrical system, controlling

system, GPS system, manual

manoeuvre control system, fire

fighting system and safety

equipments of boat.

6

Company: Highbase Strategic Sdn.

Bhd – 2009-2010 (Freelance)

Position: HAZMAT Technician (Gas

Tester/Time keeper)

Job Scope:

• Assigned for vessel cleaning job

(Qualified for entering confine

space)

• As a gas tester before vessel

cleaning job - Test for mercury,

Hydrogen Sulphide (H2S) gas

and others hazardous gas level.

• Responsible in making decision

to do vessel cleaning job safely.

• As a stand-by man while team

members entering vessel for

cleaning

• Time keeper for rotating crews

for cleaning vessel

Company: Local Engineering Sdn.

Bhd & Sarku Engineering

Sdn. Bhd– 2009-2010

(Freelance)

Position: Rigger

Job Scope:

• Assist Electrical & Instrument

(E&I) technician in doing repair

and replacement job. Project e.g.

upgrading flare system.

• Fabricate control panel box for

replace with existing old panel

box.

• Re-wiring control panel

• Install new advanced program to

ECU in control panel

• Simulate and test the system

witness by operation team

(Petronas).

Company: Emech One Sdn, Bhd. - Dec

2006 – June 2008

Position: Technical Executive

(Mechanical & Electrical)

Emech One is one of private local

company located at Kuala Terengganu,

Terengganu. They use their mechanical

and electrical expertise in consulting M&E

design and constructions.

Job Scope:

• Assigned as Technical Executive

which responsible to assist

Engineer and Project Manager

work starting from

documentation stage to

construction stage.

• Make and compile document for

tender process. ( Technical

Page 7 of 11

specification, technical data, bills

of quantity (BQ) and etc. M&E

design drawings: air

conditioning and ventilation

system, Fire fighting system

(hose reel, sprinkler system,

deluge system and etc.), Fire

Alarm n protection system, Cold

and hot water systems,

Plumbing and sanitary piping

system, Low Voltage (LV)

services, Lighting layout design,

Public Address (PA) and CCTV

system, telephone and

intercom system, Security

system (access card, passcode

door and etc.), Lightning

protection, systems, Building

Automation System (BAS), Lift

services

• All the above design is based on

technical drawing with standard

specification and engineering

calculation method:

1. Calculation of water

demand (installing

elevated water tank)

2. Calculation of current

load and maximum

demand (installing TNB

substation equipment

such as

3. MCB, MCCB,

Changeover unit and

etc)

• Evaluate and short listed

potential contractors based on

their bid prices, track record of

success project, capability,

expertise and others criteria.

• Monitor the construction works

by report of materials supplied,

construction period and make

sure the construction is following

the specification given.

• Modified drawing due to

condition on-site and produced

shop drawings.

• Technical submission process

with local authority such as

BOMBA, SATU and TNB for CF

(certificate of fitness) and other

compliances.

Company: Kenseisha (M) Sdn. Bhd. -

Dec 2005 - Nov 2006

Position: Technician (Machining)

Product: Hard Disc inner base/housing

Kenseisha (M) Sdn. Bhd. Is a public

company listed on the main market of

Bursa Malaysia located Bandar Baru

Bangi Industrial Estate Selangor Darul

Ehsan, Malaysia. Kenseisha running their

business in producing computer products

(hard disc parts, micro drive, spacer ring

& comb), industrial components

(semiconductors & controller parts), servo

8

motor parts, thermal components (CPU &

MPU Heat sink), VTR maindeck,

camcorder's body kit and etc.

Job Scope:

• Assigned to operate the Special

Purpose Machine (SPM) that

producing hard disc parts.

• Monitor the machine running

system that involved twelve (12)

module of different process to

produce one (1) piece precision

well cutted hard disc housing.

• Monitor each module's

parameters, tools and sub-

program.

1. Adjust the program by

key in X, Y and Z axis

cutting process

measured in micron.

2. Replace the cutting tool

/ bits or components

due to product defects.

• Visual check and parameters

check of products (measured in

micron unit)

• Assist an engineer to repair

machines due to malfunction

module process or scheduled

component replacement (ex:

Drive train, gear, belting, electric

motor, bearing, steel base plate

and etc.)

Company: Micro Modular System Sdn.

Bhd. - Nov 2004 – April 2005

Position: Technician (Machining) –

Practical Training

Product: Industrial Machine

Micro Modular System (MMS) is an

established company located at Bayan

Lepas (P.Pinang), that doing business in

Factory Automation and Industrial

Automation. MMS operate their business

in designing automated trim and form

systems, designing and producing cutting-

edged customised automation systems

including Test System, Vision Inspection

and Marking System, Trim and Form

Systems and Assembly System.

Job Scope:

• Assemble machine base/ body

refer to the parts and drawing

given.

• Perform machine stability

procedure by re-balancing

machine base and re-alignment

upper module.

• Installing machine parts such as

crank shaft unit, driven gear,

pulley and belting, step motor,

switches sensors and many

more electrical / mechanical

parts.

Page 9 of 11

• Install the program for the

machine functioning well (install

by programmer).

• Modify, relocate and fine

adjustment of sensors, switches,

indicators and others during

machine start-up to be related

with programs.

CERTIFICATES

1. Certificate of Safety Training (Petronas Industry Standard) BOSET (valid untill 16th May 2016)

a- Basic Offshore Safety

b- First Aid/CPR/EAR/AED

c- Basic Fire Safety

d- Sea Survival

e- Travel Safely by Boat

f- Helicopter Underwater Escape Training (HUET) with EBS

2. Basic Rigging & Slinging at Ranaco Marine Sdn. Bhd.

3. Certificate of Safety Training (Petronas Industry Standard)

a- SOS New Generation Safety Training.

b- Hydrogen Sulphide (H2S) Safety

10

CERTIFICATE OF APPRECIATION

1. Shapadu Energy & Engineering - Outstanding Contribution Towards Cakerawala Complex 10-Days Shutdown without LTI.

2. Petronas Carigali - Contribution as Mechanical Engineer during The Pre Drill Hook-Up and Commissioning Kumang Cluster

Development Project consisting of F9JT-A Wellhead.

REFERENCES

Ahmad Muhaimin Yusof Che Rozalin Che Hasan

Assistant Manager (After Sales & Services) Assistant General Manager (After Sales and Services & GLC)

UMW SYNERGISTIC GENERATION SDN. BHD. UMW SYNERGISTIC GENERATION SDN. BHD.

LOT 2, JLN. PENGISAR 15/9, LOT 2, JLN. PENGISAR 15/9,

SEKSYEN 15, 40200 SHAH ALAM SEKSYEN 15, 40200 SHAH ALAM

SELANGOR, MALAYSIA SELANGOR, MALAYSIA

Mobile : +601******** Mobile : +601********

Office: +603******** Office: +603********

Email: ********@*******.***.** Email: ********@*******.***.**

Nazmi b Mohamad

Asset Manager

Carimin Equipment Management Sdn. Bhd. (CEMSB)

Lot 3691, Kaw. Industri Telok Kalong Meil,

24007 Chukai, Kemaman, Terengganu.

Mobile : +601********

Office : +609*******

Email : *****@*******.***

Page 11 of 11

Contact this candidate