Resume

Sign in

Engineering Engineer

Location:
Venezuela
Salary:
1000
Posted:
May 10, 2019

Contact this candidate

Resume:

JOSE CORNELIO MENDOZA

*

Name: Jose Cornelio Mendoza Gutierrez

Identity card: V-7.009.490.

Nationality: Venezolano.

Birthdate: 12/06/59.

ASSOCISTE DEGREE IN APPLIED SCIENCE

Education: COMPUTER INGENEERING TECHNOLOGY (ELECTRONIC). Tampa Technical Institute 1985. Tampa, Florida. U.S.A. Idiomas: Español \ Inglés.

ac9clr@r.postjobfree.com / 584********* / Skype ac9clr@r.postjobfree.com VENEZUELA WORK EXPERIENCE:

Have 31 years work experience, in which 20 years have been in the Oil Industry.

Available to work alone or in multiply disciplinary group and under pressure. To travel and live close to work area.

Have had the under responsibility of planning, to coordinate, to direct, to control and to modify projects in field of the private and oil company,

Basic knowledge in computer systems, Microsoft office.

Basic knowledge of Industrial Security, permits of work, norms PDVSA, norms SHA, practice of safe work in the private industry and oil company.

Configuration of PLC (development of engineering of details and wired.)

Develop and configuration of engineering of details of process in the oil industry.

Accustomed to knowledge electricity, control and low power.

Detention of flaws, maintenances, calibration and placement of instruments in field.

Planning and coordination of stopped and outburst of oil and gas plants.

Control and Instrumentation engineer with experience in Engineering Development Basic and Detail in projects for the petroleum, petrochemical. Development of engineered products such as indexes and lists, instrument data sheets in general.

Valves, equipment, electrical materials, pneumatics, etc, location maps and routes instruments, Connection Diagrams, Loop Diagrams, System Architecture Plants, Instrument Installation Details.

Experience with Work Order based maintenance.

Ability to maintain confidentiality, meeting deadlines and schedules, setting priorities, working as part of a team, work independently and adapting to changing work priorities.

Ability to draw valid conclusions, apply sound judgment in making decisions, and to make decisions under pressure.

Ability to respond to common inquiries from customers, staff, regulatory agencies, vendors, and other members of the business community.

Ability to develop constructive and cooperative working relationships with others, and maintaining them over time.

Ability to demonstrate adaptability by ability to adapt to changes, delays, unexpected situations, and effectively manage competing demands.

Install, maintain, calibrate, repair, troubleshoot, test and modify analytical instrumentation safety instrumentation gas detectors,etc.) process control instrumentation (air and water flow meters, controllers, level and pressure instrumentation, chemical injection systems, etc.)

Specific instructions are given on assignments or follows written or verbal instructions and established procedures and standard practice to perform assigned tasks

Install, trouble shoot, repair, and maintain electrical and electronic equipment, including motor relays, circuit breakers, machine and process controls, circuits, and electrical distribution systems.

Ability to read and understand schematic diagrams.

capacity, perform complex diagnostics, repairs, and replacements of instrumentation and control systems, equipment and components.

Read, interpret, modify and update blueprints, schematics, and diagrams in order to troubleshoot, repair, or modify equipment, and to accurately reflect current operating systems.

Layout, assembly & wiring of electrical control panels.

Wire components (breakers, relays, PLCs, power supplies, terminal blocks.

Perform minor electrical maintenance.

JOSE CORNELIO MENDOZA

2

Maintain, adjust, make repairs, and operate equipment using pumps, air compressors, test equipment, generators, etc.

installs, repairs, modifies, and maintains electrical protective devices, controls, meters, indicators, motors, combustion control and burner management systems, generators, chillers, variable frequency drives, and boilers. Accuracy required in all phases of work. Performs preventative or corrective maintenance tasks on electrical protective devices.

Liaise with Design, Installation and Project Manager to understand needs.

Carry out site surveys with project team if required.

Maintain client confidentiality and act with discretion and a high level personal integrity.

Provide regular reports on workload and proactively complete deliverables in a timely manner.

Deputize for onsite construction supervision as required in support of the project team.

Demonstrated Problem solving skills.

Test and pre-commission of a system before handover to the client.

Troubleshoot design and construction issues in the field.

Ability and willingness to learn new skills and attend relevant training courses as and when required.

Perform complex equipment modifications in order to implement required design changes.

Performs any other duties and responsibilities as assigned by the Works Management Team.

Able to read relevant construction drawings

Knowledge of pneumatic and hydraulic control logic

Able to recognize and avoid safety hazards and dangers

Off Shore, Oil platform called February 4 belonging to PDVSA. Hydrocyclones, fiscal measurement, fuel gas, glycol regeneration, sand jet.

Responsible for troubleshooting, repair, and calibration of electrical/pneumatic control systems, process transmitters, fire and gas system.

Reading and interpreting wiring diagrams, schematics, mechanical drawings, piping/process & instrument diagrams

(P&IDs), and specifications.

Ability to pressure test pneumatic instruments for leaks, pneumatic instruments with controllers, transducers and valves in service.

Ability to loop check electrical wiring for continuity and proper termination.

Ability to handle multiple tasks.

Able to any criminal background investigation and drug screening. CAD DISIGNER 2004/2018

Draws finished design from sketches.

Update Drafting and Engineering standards.

Drafts detailed multiview drawings and products.

Create and revise production drawings (detail and layout drawings).

Makes final sketch of proposed drawing, checking dimension and scale.

Uses computer assisted design/drafting (Auto Cad) equipment and software to develop designs.

Responsible for setting up and maintaining an organized file system for Production drawings.

Utilizes knowledge of engineering practices, mathematics, building materials, and other physical sciences to complete drawings.

Prepare parts lists and bills of material required for procurement of parts.

Provide drafting support to generate, modify and adapt design, proposal, bid package, submittal, fabrication and as- built drawings, sketches or references, and bills of materials.

Create detailed CAD drawings for construction and as-built drawing submittals.

Create detailed CAD drawing for on-site work and proposals.

Support the design department and Project Managers with necessary drawings from concept to handover. QUALIFICATIONS:

PDVSA: Punta de Mata, Monagas: Field Projects Engineer, Instrumentation Inspector, Project Designer. Test and pre-commission of a system before handover to the client PRIVATE INDUSTRY: Supervisor of instrumentation, Project Designer, technician in electronics, repairs and design of electronic cards.

Test and pre-commission of a system before handover to the client. JOSE CORNELIO MENDOZA

3

TECHNICAL KNOWLEDGE:

Experience in the development of multidisciplinary projects for the oil industry, Instrumentation and control and related. Skill for managing personnel and resources in the development of engineering and instrumentation projects. Test and Pre-commission of all electrical, electronic and instrumentation control systems before delivery to the customer. Stops and starts of plants. Auto Cad: Carry out the plans, for the development of the engineering. Repair of internal combustion engines. PERSONAL GENERAL KNOWLEDGE: Repair of Internal Combustion Engines (Dismantle and Arming), brakes, Automotris Electrical System, Alternators, Starts, Hydraulic Pumps. General mechanics. COURSES:

Description

Esposition to Hydrogen Sulfide (h2s).

Fe. Evalu Categoria Carnet Fe. venc Fec. Sesión Sesión Nucleo 10/04/2018 unica ahs 10/04/2020 21/02/2018 1039 P.L.C Hazardous atmospheric evaluation

Fe. Evalu Categoria Carnet Fe. venc Fec. Sesión Sesión Nucleo 10/04/2018 unica Ahs-0000980 10/04/2020 19/02/2018 1038 P.L.C Work permit permit

Fe. Evalu Categoria Carnet Fe. venc Fec. Sesión Sesión Nucleo 10/04/2018 unica Ahs-0001332 10/04/2020 23/02/2018 1042 P.L.C Security in Confined Spaces

Fe. Evalu Categoria Carnet Fe. venc Fec. Sesión Sesión Nucleo 10/04/2018 unica Ahs-0004252 10/04/2020 23/02/2018 1040 P.L.C DETAILED EXPERIENCE:

• PDVSA APRIL 2017 / DECEMBER 2018: CAD DISIGNER . Assigned to the GIPS Management, in the 4F Petroleum Platform, information gathering in the field, for the development of Basic and detailed engineering to realize the planes of Instrumentation and Mechanical Isometrics, Addressing to the PLCs, Diagrams of ties, Connection Details to Process, Signal Routing, Connection Boxes, Metric Calculations, Location of instruments, Pneumatic Routing, Mechanical Isometrics, in Sand Jet Equipment, Hydro Cyclones, Skimming, glycol, fuel gas, hoppers, Fiscal Measurement, Installation Details of Instruments in the Equipment, Separators, Level Gauge in the low Pressure Compressors, level Gauges in the Scrubbers. Level transmitters in the input separators A and B, degasser A and B, electrostatic treaters A and B.

VEPICA: 2016 to 2016: JUSEPIN 2000, CAD DISIGNER

Assigned to the construction of the furnace gas compression plant, Monagas, Development of detailed engineering in the diagrams of loops, re-addressing of the signals and make new signals to the drawers of control with the PLC systems, which were not defined or contemplated in the basic engineering, Re-configuration of the terminals of the PLC, Plans as built, Routing, Metric Calculations, location of instruments, junction boxes, Plans as built. VEPICA: 2011 to 2018: CAD DISIGNER .

Assigned to the instrumentation department, For the development of Basic and detailed engineering to perform the instrumentation drawings, Addressing the PLCs, Loop diagrams, Access control, Fire and Gas Systems, SIS System, Electric Substations, CCM, DCS (Distributed Control System), Process Connection Details, Signal Routing, Connection Boxes, Metric Calculations, Location of Instruments, Control Architecture, Telemetry, Pneumatic Routing, Low Power Electric Control, Field Information Survey.

Projects:) Petrovictoria, S.A / Eor –Polímero, Petro Cedeño / Mejoras Disergonomicas, Petropiar / Patio de tuberías y Almacén de Lubricantes, Petrocedeño / Nueva Caldera de Vapor de Alta Presión, Petropiar / Jusepin 2000. Planta Compresora de gas ( El furial Maturin).

JOSE CORNELIO MENDOZA

4

• RLG: 2011 to 2011: CAD DISIGNER.

Assigned to the instrumentation department, For the development of Basic and detailed engineering to perform the instrumentation drawings, Addressing the PLCs, Loop diagrams, Access control, Fire and Gas Systems, SIS System, Electric Substations, CCM, DCS (Distributed Control System), Process Connection Details, Signal Routing, Connection Boxes, Metric Calculations, Location of Instruments, Control Architecture, Telemetry, Pneumatic Routing, Low Power Electric Control, Field Information Survey.

FCP PROYECT: 2011 al 2011: CAD DISIGNER.

Assigned to the instrumentation department, For the development of Basic and detailed engineering to perform the instrumentation drawings, Addressing the PLCs, Loop diagrams, Access control, Fire and Gas Systems, SIS System, Electric Substations, CCM, DCS (Distributed Control System), Process Connection Details, Signal Routing, Connection Boxes, Metric Calculations, Location of Instruments, Control Architecture, Telemetry, Pneumatic Routing, Low Power Electric Control, Field Information Survey.

JAP CONORCA: 2009 al 2010. CAD DISIGNER.

Assigned to the instrumentation department, For the development of Basic and detailed engineering to perform the instrumentation drawings, Addressing the PLCs, Loop diagrams, Access control, Fire and Gas Systems, SIS System, Electric Substations, CCM, DCS (Distributed Control System), Process Connection Details, Signal Routing, Connection Boxes, Metric Calculations, Location of Instruments, Control Architecture, Telemetry, Pneumatic Routing, Low Power Electric Control, Field Information Survey.

JANTESA: 2004 al 2009, CAD DISIGNER.

Assigned to the instrumentation department, For the development of Basic and detailed engineering to perform the instrumentation drawings, Addressing the PLCs, Loop diagrams, Access control, Fire and Gas Systems, SIS System, Electric Substations, CCM, DCS (Distributed Control System), Process Connection Details, Signal Routing, Connection Boxes, Metric Calculations, Location of Instruments, Control Architecture, Telemetry, Pneumatic Routing, Low Power Electric Control, Field Information Survey.

• CEPLAN: 2004 al 2004: CAD DISIGNER.

Activities: Lifting of all the control loops of instrumentation and the fire and gas system of the plant, to make the plans as built (FERTINITRO- PDVSA.).

PDVSA MAY 2002 / FEBRUARY 2004 : field engineer in instrumentation.

Adaptation of the plant of sweetening of gas of complex Muscar PDVSA Punta de Mata. Edo – Monadas. Activities: Knot of pneumatic and electronic control, valves of control, PLC, instruments of pressure, temperature, differential pressure, pressure switch, systems of control, supervisory of motors (Bentley Nevada) 800 Hp y 100 Hp, CCM, cooling electricity of power and control. Test and pre-commission of a system before handover to the client

Planning, development and it offers of the engineering of details for the automation of the sulfa treat of the complex Muscar. PDVSA, Punta de Mata, Edo – Monadas.

Activities: Knot of pneumatic, PLC, optic fiber, valves of control, instruments of level, pressure and differential pressure, UPS, switch de level, electricity in lower power, pressure of work 1200 LBS, civil and mechanical works. Test and pre- commission of a system before handover to the client

Planning, development and it offers of the engineering of details for the automation of the fall of differential pressure of entrance and exit of gas to plant AMANA, PDVSA, Punta de Mata, Edo – Monadas. Activities: Knot of pneumatic, PLC, valves of control, Actuator of 20”, electricity in lower power, pressure of work 1200Lbs, civil and mechanical works. Test and pre-commission of a system before handover to the client.

Planning, development and it offers of the engineering of details for the automation of the Australian tanks of complex Muscar. PDVSA, Punta de Mata, Edo – Monagas.

Activities: Electric valves, pressure of switch, instruments of pressure, temperature, PLC, telemetry, bombs de 100Hp, electricity of power and control switch of level. Test and pre-commission of a system before handover to the client .

Replace and setting in service of a new Flare of the plant of sweating of the complex Muscar. PDVSA, Punta de Mata, Edo – Monadas .

Activities: Valves Auto regulate of gas, Instruments of Flow, pressure, temperature, switch of level, motors of 20HP, bombs of 20HP electricity of power and control, PLC, instruments of level, pressure of switch, electric barn, civil and mechanical works. Test and pre-commission of a system before handover to the client. JOSE CORNELIO MENDOZA

5

Control of Access to the Oil facilities, Complex Muscar, COT, Santa Barbara y Amana. PDVSA, Punta de Mata, Edo – Monagas.

Activities: Electric check, Road construction, civil works.

Others: Check engineering details to replace control panels of turbo compressors of the plants, Amana, COT, and of Complex Muscar, PDVSA, Punta de Mata, Edo-Monagas. PETPACK S.A JULY 1999 / DECEMBER 2002: Instrumentation Inspector. Activities: Responsible for the construction of the polymer plant, (2 years under construction) Electric power Generation. Cooling Towers, Boilers, Power Plants, Distillation Towers of Methanol and Glycol, CCM, Motors, Pumps, Heat Exchangers, Pressure Instruments, Vacuum, Differential Pressure, Temperature, Valves. of Control, Solenoid Valves, Actuators, Storage Tanks, Pneumatic Loops. Ejectors, level Switch, 600LBS Steam generation, compressors, Ups, Chromatography and laboratory Equipment for Quality Control, Civil, Mechanical and Electrical Work. Stop and Start the Plant. Reporting to Management. Test and pre-commission of a system before handover to the client.

PETPACK S.A: 1996 to /1999. PETPACK S.A MANTEX : Instrumentation Inspector. Plant, Rhone Poulenc Group, Assigned to the department of instrumentation, for the inspection and setting goes of a plant of chemical process.

1987 to 1996- POLYQUIM-PLANT: Electronics Technician. Activities: Assigned to the department of instrumentation and Electricity; design and development of circuits electronics, detention of flaws in field, repair of electronic cards, regulators of speed AC y DC, pyrometer, chute weight, knot of pneumatic, PLC, equipment of laboratory, electricity and control in low power. Planning and offers for the stop and outburst of plant. Generation of electricity with vapor and turbo generators to gas and gas oil, compressors, equipment of laboratory, equipment of ultra sonic of cleaning, pyrometer, caldron, ovens, handling of personal; reporting to the management of plant.

1987 al 1987- Super Envases Envalic: Electronics Technician. Activities: Assigned to the department of Electricity, general Repairs of electrics cards, Electricity in control and low power, maintenance to motors, regulators of motors AC, DC, instrumentation, PLC.

1986 al 1986 – Conveca: Electronics Technician.

Activities: Assigned to the department of electronic for the development of circuits of control of speed in motors AC and DC, generals repairs of electronic cards.



Contact this candidate