It is with great interest that I am exploring employment opportunity with in your esteemed organization. I have come to know from a reliable source that some posts are vacant under your kind Control. I wish to offer my Candidature for the vacant post, my Curriculum Vitae is enclosed herewith this application.
I am eager to grow as Instrumentation Engineer (Construction & Commissioning) and would welcome this opportunity. I am confident that I can prove myself & improve my performance to reach the day by day challenges. I have 20 years of hands-on experience in Petrochemicals, Fertilizer and Oil & Gas Plants (Onshore & Offshore Green and Brown Fields). Day by day Project meetings; Walk down with Clients as well supporting team. I have good knowledge in E&I Documentation with field survey and verifications, Planned of the work schedule, and agreed-upon level of quality on assigned project works, Loop Folder Preparation, EI&T Survey of the Construction, directly involve Instruments Calibration(Lab-Field); Loop check port of Pre-Commissioning, Electrical Commissioning for Offshore Heart Tracing Panels, F&G Safety System functional test as well Commissioning, Preparation and Energizations for Pre-Commissioning and Commissioning, start up, Trouble shooting, and Maintenance and Shut-Down Activities and Supporting of Plan Operations.
I am enclosing a copy of my resume that will give you more details about my qualification, experience and abilities. I hope you will find my candidature worthy of your favorable consideration.
I am interested in joining your organization, an enthusiastic and always eager to learn and improve myself.
I will be looking forward for your response. Thank you for your time and consideration.
PIN: 530016, A.P, INDIA
Skype ID: dadi.raju
Position, here I can apply my knowledge and experience that I earned and faced in day-to-day challenge of my professional carrier, Positive attitude, hard working.
Throughout My Career, I Have Been Successful in Managing My Roles in Different Organization. I Am Successfully Completed my BE in Electronics and Instrumentation Engineering from Annamalai University-India. For The Past 20 Years I Am Working as Instrumentation Engineer/Supervisor Commissioning roles in Different Organization like Kazakhstan AGIP KCO Offshore Project, Muscat(Oman) under PDO Project, Abu Dhabi-Onshore & Offshore, Nigeria (Brown and Green Fields), Saudi Arabia under Aramco Project (Petro Rabigh) and India (Brown and Green Fields) for The Successful Oil and Gas Plan Constructions & fully Involve in the Pre-Commissioning & Commissioning as well Documentation Field Verification and Loop checking as well as the Loop Folders Preparation for the Loop Checking and Plant Unites Shut-Down activities, Energizations of the E&I Control Panels, Maintenance of the Oil & Gas Plant units. I Have Good Exposure to The DCS, PLC, F&G Safety System functional testing and Pre-Commissioning as well as Commissioning Field Instruments.
Bachelor of Engineering in Electronic and Instrumentation from Annamalai University with First Class (Correspondence mode from June-2009 to June-2012)
Diploma from Vinayaka Mission University with First Class (from June-2005 to July-2007)
I.T.I (Industrial Trade Training Institute) with FIRST CLASS in Instrumentation Mechanic (Government of Andhra Pradesh, Department of Employment and Training) August 1996 to July 1998.
BOSITE (Basic Offshore Safety Induction and Emergency Training in Kazakhstan) and
Offshore Survival (Sea Survival & H.U.E.T) In Abu-Dhabi.
Working with M/s ZEROCK CONSTRUCTION NIGERIA LIMITED. As Electrical and Instrumentation Engineer with M/s: ENI-NAOC IDU MP-B Turbo Compressor (Solar and Siemens) Installation and Commissioning Project (Brown Field) in AGIP (NAOC) IDU Flow Station in Nigeria-African Country, from 31-May-2017 to Still Date.
All Types of oil and gas field Instruments such as Calibrations, Installations, Pre-Commissioning, Commissioning and Loop Folders and documentation Preparation for the precision instruments that measures, indicate, transmit, record and controls and Good Knowledge of Documentations Verification.
Directly responsible for construction, monitoring, inspection and Test Plans for the installation, testing, Pre commissioning and commissioning of instrument and process control Systems.
Construction, Pre-Commissioning and Commissioning fully involve and also B.M.S (Boiler Management Systems) Performing internal functional testing and witness for the testing.
Trouble shooting in process control loops, interlocks system, start up and shutdown logic sequences (pumps, high pressure boiler, compressors and turbines) Preparation of reports, Preparation of the instrument requirement documents for the designer, fabricator, and installer including installation details, specification sheets and review as project installation with 3D review Drawing.
Pre-Commissioning and Commissioning of field instruments like (all type of transmitters, RTD, thermocouples, gauges, switches, motor operated valves, ROTOR MOV Valves Calibrations and functional test. Pneumatic valves, Control valves and also including F&G System)
Displacer Type of level instruments like various make FISHER & FOXBORO & ROSEMOUNT & MEGNETROL & ULTRASONIC Level Transmitters Functional checks. Control Valves and Shutdown valves like various make FISHER & ABB & BIFFI Valves Calibrations and functional checks.
Fire and Gas Instruments functional testing like a H2S Gas Detectors, Smoke Detectors, Flam (IR) Detectors, heat detectors, manual call points, Bacons lights testing, Open Path Detectors make ICARE & HONEYWELL.
Planning as per project completion schedule, project walk down with client and vendors, Construction Kick Off Meeting and project meetings, and agreed-upon level of quality on assigned project work,
Prepare daily and weekly construction report, as applicable. HART & F.F All Type of Field Instruments LAB Calibrations & FIELD Calibration. Good Knowledge of Hart communicators 275 & 375 & 475 & ABB-691HT & Yokogawa familiar to operate.
Good Knowledge of Well Head Control Panel and Hydraulic Power Unit functional test
Calibration and Loop checking of the F&G Detectors. Like H2s, Combustible, Hydrogen, Heat and Smoke Detectors and Loop Folders Preparations for the Pre-Commissioning.
Knowledge in SCADA (Siemens), DCS (Foxboro, Rosemount, Yokogawa) and PLC like Functional test, Cause effect checking Activities.
Knowledge of Electrical MCC Panel, VFD Panel, Battery Charger Panel, Lube Oil Control Panel, Instrument Control Panels Power-up and Pre-commissioning and Commissioning of Solar Compressor and Turbines (Mars 90), Process Cooler Start-Up, Lube Oil Skid Start-Up.
Knowledge of Hot Taping of the Pressurized lines stop systems.
Supervision of installation, inspection, calibration, loop checking, site acceptance test, check sheet clearance through WINPCS and AMS (Automated Completions System) And IMIS (Integrated Management Information System) system punch list sign off, As-built preparations, site modification as required at site condition, discuss & finalize with clients changes required at site, finalizing FCN. Co-ordination with vendor representative for special Instrument /system checking/commissioning. ESD/F&G system modification/ start up loop by loop transfer. Co-ordination with client kick off meeting, monthly progress review meeting, close out report hand over as built documents/drawings, survey changes, field changes / spares etc.
Drawing & Symbols:
Good understanding of process piping and instrument drawing (P&ID) And Construction Field surveying.
Understanding of instrument loop drawings, both pneumatic and electronic.
Understanding of instrument data sheets.
Reading cause & effect diagram.
Involve the prepare Electrical and Instrumentation both Drawing’s Red Line Mark-up Like Instrument Index, P&ID review, I/O schedule, data sheets, DCS / Analyzers specifications, loop diagrams, hook-up drawings, wiring drawings, panel layouts, control layout, grounding diagrams and termination drawings, cause & effect diagram, cable schedule, cable connection list, instrument layout drawings, vendor documents review and verifications.
Instruments and Systems Handling:Emerson Rosemount RS3 system, Triconex (TMR PLC) ESD/F&G system, Siemens, S-5, S-7 control PLC system, Invensys Foxboro Control system, Yokogawa RS Logix 5000 and 3000 System, HIMA ESD system and DELTA V EMERSON Control System By F.F (foundation fieldbas) Familiar with various makes of Electronics and pneumatic Instruments, Conversant with instrumentation for process units, Boilers, Analyzers, Solar Gas Compressor and Turbine control systems, Fire and Gas detection system, Flame scanner and smoke detection systems good understanding Pre-Commissioning and Commissioning handover to the Clients
Worked with M/s NCC (National Contracting Company Saudi Arabia Ltd). As Instrumentation Engineer (Construction and Pre-Commissioning) Department with M/s: Snamprogetti Saudi Arabia Ltd Project in Petro Rabigh-II (Naphtha and Aromatics Package RP-2) Refining & Petrochemical Project in Kingdom of Saudi Arabia, from 10-January-2015 to 15-January-2017.
Worked With M/s P.V.Ramana Instrumentation Contracting PVT LTD.As Electrical and Instrumentation Engineer Supplied For The H.P.C.L (Hindustan Petroleum Corporation Ltd) INDIA, from 10-December-2013 to 20-December-2014.
Worked with M/s AL MELEHY HUMAN RESOURCE SERVICES. As INSTRUMENTATION SUPERVISOR Supplied for ADMA-OPCO SHORT-DOWN OFFSHORE PROJECT (Brown Field) in ABU-DHABI from 03-September-2013 to 26-November-2013.
Worked with M/s ENER TECH L.L.P. As INSTRUMENTATION FIELD ENGINEER (Calibration and Pre-Commissioning team) Supplied to IMTECH BOLASHAK With ICAT Team & Mechanical Completion (for the E&IT) Department with TOZZI-KCOI Project in KASHAGAN DEVELOPMENT EXPERIMENTAL PROGRAMME PROJECT (OFFSHORE COMPLEX “A” & “D”) Under ENI GROUP AGIP KAZAKHSTAN NORTH CASPIAN OPERATING COMPANY (Upstream-Project), Atyrau-KAZAKHSTAN from 20/03/2011 to 31/05/2013.
Responsibilities and Duties:
Involved in MC (Mechanical Completion) Field Survey & Commissioning for scheduling and preparation of test packs (ITR A&B) with WIN PC’s (Windows Project Completion System) and AMS (Automated Completions System) And IMIS (Integrated Management Information System), as-built drawings, updating, highlights, deviation and modifications done at site. Better co-ordination with engineering & construction department to resolve conflict& complex situations during construction & pre-commissioning & commissioning and Loop Folders Preparation activities.
Fully involved in Field Auxiliary Rooms (FAR) Installations, Control Room All types of Panels Installations as per the Drawing and preparation of the materials & Manpower.
Working as part of ICAT (Integrated commissioning and accepting team) for verification of E&I Documentation, EI&T Survey of construction completion as well as coordination, scheduling and execution of the pre- commissioning and commissioning program in accordance with the Project Completion Work Plan. Involved Electrical Commissioning in Offshore like Solar Gas Compressor and Turbine skid instruments and motors testing, MCC Circuit Breakers testing, VFD Panels Installation and test with solar vendors, Lube oil skid Panel Installation, Battery charger panel installation test with vendors, Heart Tracing Panels & Field Survey. Preparation E&I Documentation I have undergone complete training of Safety, Basic Fire Fighting, Working at Height, Breathing Apparatus and Offshore Survival course (BOSEIT).
Responsible for time to time with client free walk downs in the Field, Instrument Devices and Equipment related to Instrumentation and Controls. Participate on Tri- Party walk down with other departments as Client Commissioning Department Representatives. Participate in Site Acceptance Test ( SAT ) on Power Generation System, Emergency Generators, Fire Water System and Central Control Room Equipment’s as Client Commissioning Department Representatives. Inspection of Instrument Devices as per Data sheets as part of Mechanical Completion Activities. Inspection and checks punch list items that raise during walk down if had been rectified. Loop checking of different type of units like Gas Compressor & Turbines, Fire & Gas Systems, HVAC, Fire Water, Instrument Air, Lube oil skids and other utility and controls instruments. Inspection of Distribution boards, also Electrical Lighting Circuits, Heat Trace Circuits, MCC Cubicle Circuit breaker functional checks with test kits, lMS/DMS Checks. Duties included operation and maintenance of WHT Control panels of different manufacturers like Brissco, Baker, Otis, Autocon. Well testing using separators assigned Level controls. Annulus Pressure Surveys, Valve integrity checks. System Function checks. Including deluge operation systems.
Entirely responsible for erection, quality, testing, Pre-commissioning, Commissioning & Maintenance of Electrical and instrumentation Equipment which includes Instrument Control Panels and Electrical MCC Panels by providing corresponding relay settings, also various automation equipment like PLC, VFD panels, Batteries Installation and Battery Chargers Panel Installation and Testing, various instruments like I/P converters for control valves etc., and other sensing equipment.
Worked with M/s GALFAR ENGINEERING & CONTRACTIN CO. SAOG as INSTRUMENTATIONS CALIBRATION AND COMMISSIONING SUPERVISOR for the Instruments Calibrations & Commissioning team in Harweel Cluster Facilities – Phase II (Upstream-Project), Harweel-OMAN from 2009/10/25 to 2010/09/20.
Good Experience in Site Inspections and involve to Inspect the construction Completion, Loop Checking, Start Up, And Troubleshooting. Commissioning, Start-Up & Normalization of Various Vendor Packages, Wellheads Control System, Hipps (High Integrated Pressure Protection System). Bently Nevada Vibration Monitoring System, Steam Turbine (MAN Turbo), Air Compressor with Package Control Panels, Solar Compressor units, Water Treatment and Injection System (Include SRP Package) Of Veolia. Commissioning of Heating, Ventilation & HVAC Package. Worked for The Commissioning of Various Communication Systems Such as SDH, PDH, EDSS, CCTV, PAGA, Telecom & Access Control System
Co-ordination with time to time meetings with clients, planning to as per project completion schedule, preparation complete daily progress reports and documentation as per project requirements, Material Procurement and approvals.
Maintenance of the plant equipment: Field Modifications, Fault Diagnosis & Trouble Shooting & Inspection of Completed Works, Execute preventive maintenance Jobs.
Co-ordination time to time with the Vendors, Manufacturers and other contracting companies on requirement basis.
Worked with M/s N.P.C.C (National Petroleum Construction Company) as a INSTRUMENTATION SUPERVISOR (for Pre-Commissioning and Commissioning) in Abu-Dhabi UAE. From Dec-2006 to May-2007.
Involve Instruments Hook-Up and Vendor Instruments Installation, Documentation Field Verifications, Loop Folders Preparations, Instruments Calibration & Inspections, Loop Checking, Commissioning and Trouble Shooting of Instruments. Coordinate with The Principals and Main Contractors for The Planned Jobs and Brief Them the Proceedings. Procuring The Work Permits and Make Sure That All the Safety Procedures Are Brought in Practice. Allocating The Jobs to Instrument Electricians Teams Worked with Us and Check Their Work as Per the Drawing Provided. I Was Working Has Been in Instrument Loops Testing, Function Test, Calibration and Commissioning Activates in Process Area Instrument Like Transmitter (Yokogawa FF) Control Valve with Fisher DVC 6000F Series Positioner & Metso & Siemens Positioner, SOV, ESDV, ON/OFF Valve, Thermo Couple, RTD, Familiar with 375 Field Communicator. I Was Worked in FGS, IPS, DCS, Bently Nevada Vibration Monitoring System & Temperature System. I Have Good Safety Record & I Was Regular in My Duty Etc. Involved in Field Auxiliary Rooms (FAR) Installations.
And worked with M/s N.P.C.C (National Petroleum Construction Company) Supplied for The ABU DHABI COMPANY FOR ONSHORE/OFFSHORE OIL OPERATIONS (ADCO) OGD- III Upstream Project at Bab-Habshan-Abu-Dhabi UAE. With Commissioning Team As a Instrumentation Commissioning Supervisor From May 2007 to Jan 2008.
And all so worked with M/s N.P.C.C (National Petroleum Construction Company) Supplied for The RUWAIS.3rd NGL Project under GAS CO Refinery Plant – Ruwais-Abu-Dhabi UAE. With Commissioning Team As a Instrumentation Commissioning Supervisor. From Jan 2008 to Jan 2009.
Working With Site Inspections and Witnessing Team and Involve Lab & Field Instruments Calibration, Wiring Continuity And Color Coding, Loop Checking And Commissioning for All Type Instruments Like PT, FT, LT, TT, DPT Make Like Rosemount, Honeywell, Yokogawa, Foxboro And Control Valves, On-Off Valves Make Masoneilan, Fisher, Voltek And Switches, Gauges, Make Like Altop, Wika, Warrie And I/P Converter Make Rosemount, Masoneilan, Yokogawa, Siemens And Also Valve Positioner, Thermo Couple, RTD. I can Reading and perform P & ID Drawings, Installation Drawings, HOOK-UP, Instrument LOOP Diagrams, Relay Logic Drawings, Also I am Worked Instrument Control Systems Like DCS, PLC Foxboro & Fisher Rosemount Foundation Field Bus & Yokogawa DCS System. Familiar with Rosemount Hart&275/375/475, Honeywell XP Rivon and Working Panel Wiring Modification Startup and Commissioning Activities. I Have Good Safety Record. I Am Working With Safety Rules & Proper Procedure. In this project I am performed as a Permit Holder also, and I am Regular In My Duty Etc. for the BAB Wellheads around 98 Wellheads in Habshan Project.
I am worked with Also M/s MAERSK OIL QATAR (6048) Offshore Project Through M/s N.P.C.C (National Petroleum Construction Company) with commissioning team. As a Instrumentation Commissioning Supervisor in Maersk Oil Qatar 6048 Offshore Project Form 01/01/2009 to 10/09/2009.
Attending Daily Jobs Allotted by The Supervisor Like PM Check, Platform Alarms and Trip Checks and Other Instrument Related Jobs Coming Up Every Now and Then Co-ordinates by The Operations Department Like Check and Calibrate the Instruments for Abnormal Readings, Field Calibration of Control Valves, Check and Service Fire & Gas and Smoke Detectors, Etc. follow the Work Permit system and Canceling Them Once the Job Is Completed, coordinating with The Area Control Room Operations and Field Operators While Attending the Jobs. Supervising of Projects for Calibration, Installation, Commissioning, Hot Cutover, And Check the Contractor's Work as Per the P& ID Provided. Also Involved in Plant Shutdowns Under the Supervision of Shutdown Management Team.
Experience in India:
Worked with M/s. Industrial Controls, Visakhapatnam in India as an Assistant Instrumentation Technician. From aug.1998 to Jan1999.
Worked with M/s. C & I Systems, Visakhapatnam from Feb.1999 to Dec.2000 as a Instrumentation Technician.
Worked with M/s.JAISUN AND HUTCHISON CONTROLS PVT LTD Visakhapatnam HPCL PROJECT. (H.O.Chennai) From Jan.2001 toFeb.2002 as a Instrumentation Supervisor.
Worked with M/s.ADITYA ELECTRONICS Pvt Ltd, Visakhapatnam from May.2002 to Dec.2005 as a Instrumentation Commissioning Supervisor.
Worked with M/s.ADITYA ELECTRONICS Pvt Ltd, Visakhapatnam from January.2006 to Dec.2006 as a Instrumentation Commissioning Engineer.
It is a General Contractor in the fields of sectors such as Oil & Gas, and Petrochemical Under gone project training in Hindustan Petroleum Corporation Ltd.Co-Boiler, Visakhapatnam.
Responsibilities and duties:
Calibration and Installation of the oil and gas sector field instruments.
Supervision of the Project Construction Hook-UP Activities Like Instruments Installation, JB’s Installation as Location Drawing, Cable tray Supporting and Cable tray Installation, Renovation, Pre-Commissioning, Commissioning, Maintenance And Shutdown Of All Type Pneumatic And Electronic Field And Panel Instruments Connected With Various Flow, Pressure, Level And Temperature Control During Running, Start Up, Shutdown And Preventive Maintenance In Refinery.
Loop checking of instruments from field to DCS panel.
Worked with DRUCK-TRX calibrator, HART communicators (275 & 375 & ABB & YOKOGAWA)
All the process variables LAB & FIELD Calibration & Pre-Commissioning & Maintenances of the instruments.
Performing the activities as per the safety rules.
Performing all work to COMPANY requirements, Including Calibration, Commissioning Maintenance, and troubleshooting of all Type Instruments
Good working knowledge in FUP Editor for logic checking and faultfinding.
Worked by Yokogawa Centum CS 3000.DCS & Allan Bradley, Yokogawa and Relay logic sequence control system in PLC
Worked on Controls-3 elements drum level control.
All Transmitters, RTD, THERMOCOUPLE, pressure and level switches, Motorized control valves, Field and Lab Calibrations and Preparation for the Loop Checking and All Types of Instrument Loops Energization, fully involve Pre-Commissioning and Commissioning Activities
Siemens PLC-S7-400 System Loops Energizations, Preparation Check-lists fully involve Pre-Commissioning and Start –UP the different type of Units in Oil and Gas Sectors.
DELTA V EMERSON CONTROL SYSTEM BY F.F (foundation fieldbas) all type of Transmitters Calibrations and Troubleshoots Instrument Loops Energizations, fully involve Construction, Pre-Commissioning and Start-UP.
Invensys Foxboro Controls System Loops Energizations.
Professional computer user.
Operating systems like windows 98, 2000, XP.
Computer packages like Good command of Microsoft Office™ tools (Word™, Excel™, Outlook and PowerPoint™).
SPECIAL TRAINING / COURSE CONDUCTED
Basic First Aid, Advance First Aid Training
Basic H2S and Breathing Apparatus Training provided by NPCC (ABU DHABI)&GALFAR(OMAN)
Basic Fire Fighting Training provided by NPCC.
PTW SYSTAM (I was a permit holder for PDO there I was regular in my duty)
BOSITE (Basic Offshore Safety Induction and Emergency Training in Kazakhstan) Expiry Date -26/03/2015.
Offshore Survival (Sea Survival & H.U.E.T) In Abu-Dhabi. Expiry Date-08.10.2016.
Date of Birth & Sex
DOOR NO:49/50/10, SANTHIPURAM,
Mobile No:009*********** and
Email ID: firstname.lastname@example.org
English, Hindi, Telugu.
Passport No &
Date of Issue
Date of Expiry
S 3803397 &
Total of Experience In Instrumentation Oil & Gas Sectors:
As Per Company Standards
I hereby declare that all statements made in this application are true and complete to the best of my knowledge and belief.
Place: Port Harcourt-Nigeria.