RAJESH KUMAR ATHIKUZHY
Instrumentation & Control Engineer
*/**, *************, ********, ******* Thaluk, Palakkad Dist., Kerala, India
Phone: +91-989*******, firstname.lastname@example.org, Skype: rajeshkumarab
Nationality: Indian, Current Location: India
Sector: Power/Energy (Fossil fired Boiler/STG/GT/HRSG)
Versatile and innovative Power Plant Instrumentation & Control Engineer. Recognized for exceptional ability for construction and commissioning of Instrumentation & Control systems, improve quality control, and cut costs. Proven communicator, fostering relations with management, team members, vendors and clients, consistently achieving and exceeding quality assurance goals for over 19 years.
Instrument installation, Loop test, Calibration and Commissioning.
PLC/SCADA/DCS Installation, Logic Modification, Function test and Commissioning
Knowledge in project standards ISA/IEC/NEMA/BS/EN/IEEE/ANSI/API/NEC etc.
DCS Experience: Alstom Alspa/ABB Advant P320, GE Mark V, Mark Vie; Honeywell TDC 3000
PLC Experience Allen Bradley, Siemens.
RCA (Root Cause Analysis) of technical issues.
Site Instrumentation design modifications, design review and Comment.
Issuing and closing of NCRs and Punch lists.
Team leader and staff Trainer for Plant operations.
Experience in commissioning of Pressure, Flow, Level Transmitters, Mass flow transmitters, Gas flow transmitters, Analyzers, Control Valves, Motor Operated Valves.
Turn over Package and Engineering documents review and comment.
Participate in SAT / FAT.
Experience in F&G installation inspection.
QMS, CEMS, SWAS, CMS/VMS system inspection and commissioning.
1.B.Tech in Electronics and Telecommunication Engineering
From J.R.N. Rajasthan Vidya Peeth University, Udaipur, Rajasthan on 2015
2.Diploma in Industrial Automation
from Remotech Engineering, Coimbatore, India on 2012
OMROM-Zentools, Siemens Simatic Manager S7, Allen Bradely RS logix500
3.Engineering Diploma in Instrument Technology
Govt. of Kerala (State Board of Technical Education), India on 1995
GE Power- AVA Energy, Saudi Arabia
Instrumentation & Control Engineer (TFA) 18th April 2018 to September 22nd 2018
Project: 5x627MW SEPCO Yanbu III, Thermal Power Plant, Saudi Arabia
Completed Construction/installation of all field instruments. Completed Logic & Interlock modification wherever necessary. Interacted with DCS vendors and supported main contractor for speeding up commissioning activities. Tested / Commissioned startup and shut down sequence of FGD. Advised contractor to resolve instrument installation issues. Inspected I&C materials and followed up / speeded up material delivery process. Contacted vendors and third party suppliers for site support.
SARAFF ENERGIES CO. LTD., Krabi, Thailand, 10MW, Biomass Power Plant and
SARAFF BIOGAS ENERGIES LTD., Krabi, Thailand 3.4MW
Vice President - Biomass & Bio Gas Power Plants May 15th 2017 to March 31st 2018
Completed RCA for economizer over heating issue. Successfully implemented resolution according to RCA. increased total monthly production of electricity from 4000MW to 6000 MW. Reduced cost of maintenance, Increased profit. Increased plant reliability and plant efficiency. Participated in HAZOP/ZIL for Bio gas area. Estimated annual budget and new projects budget. Plant General Management including Administration, Operation and Projects. Also worked Electrical & Instrumentation Project Manager.
FICHTNER GmbH – AJEC, Saudi Arabia,
Senior Instrumentation & Control Engineer (Owner’s Engineer) October 10th 2015 to 31st March 2017
Project: JSTPP 4x700 Thermal Power Plant, Saudi Arabia
Inspection completed for field instrumentation installation, Inspection of Turbine Protection System (TPS) and Turbine Control System (TCS). DCS/PLC, Inspection of optical fibre tests (OTDR). Raising and closure of Site Observation Reports, NCR, Punch list items. SAT of DCS controllers and Vibration Monitoring system (VMS). Completed functional test and Interlock test of Water, Steam and Flue gas systems. DCS used: Yokogawa-Honey Well.
Parsons Brinckerhoff, Indonesia,
SUMSEL-5, 2 x 150 MW, Coal Fired Thermal Power Plant.
Instrument & Control Lead Engineer 09thJuly 2014 to 01th September 2014
Worked as Owners Engineer. SAT of DCS Panels. Completed Site Instrumentation & Control system Inspection. Engineering document review and comment. Pushing the contractor for speeding up the material delivery. Advising contractors.
Lahmeyer International GmbH, Saudi Arabia
Instrumentation & Controls Engineer -April 2nd 2012 to Feb 05, 2014
Project: Qurayyah Power plant, Saudi Arabia Total 4530 MW Combined Cycle Power Plant,
Completed inspection of I&C commissioning activities in the conversion of single cycle to combined cycle power plant HRSG. Commissioning of GE 7FA Gas turbine instrumentation and MarkV Controller. Site Acceptance Test (SAT) for DCS and PLC Panels. Functional and interlock testing of HRSG control system. Raising and closing of punch list, NCR and surveillance reports. Review and comment ECC and CCC Packages.
ALSTOM POWER ECS, Saudi Arabia
Lead Instrumentation & Control Engineer - 13 March 2010 to 30th July 2010
Project: Shoaiba Power Plant Stage III, Saudi Arabia, 3 x 400MW
Developed installation drawings according to project requirements which meet project standards. Completed the project within the time frame. Completed Erection/ Installation and pre-commissioning of the instrumentation & control system with special focus on Electrostatic Precipitator (ESP) and Flue Gas Desulphurization (FGD). Trained junior I&C supervisors and technicians. Field Design modifications done.
ANSALDO CALDAIE SpA, Saudi Arabia
Instrumentation & Control Chief Engineer - 1st May 2008 to 29th Apr 2009
Project: Shoaiba Phase 3, IWPP - Power Plant, Saudi Arabia, 3 x 400MW
Client: SWEC -Saudi Water and Electricity Company
Worked as a I&C team leader. Interviewed and appointed young I&C Engineers as a team for the Steam Boiler. Completed the Commissioning jobs within planned time including Burner Management System and Boiler Protection System. Commissioned I&C of Demin and Desalination Water Plants. DCS used for Logic & Interlock-Siemens.
ALSTOM POWER EUB, Saudi Arabia
Instrumentation Supervisor- Commissioning From 18 Oct 2001 to 01 Jan 2006
Project: Shoaiba Power Plant, Stage II – 5x385 MW, Saudi Arabia
Supervision of the instrument and electrical commissioning activities. Supervision of the instrument calibration in the boiler. Completed loop checks, energization of control panels in the stage II boilers. Supervised insulation tests (IR test), Test run and Commissioning of LV and MV motors. Special focus on commissioning and testing of PETROL mass flow meters and hand held flow meters. Completed commissioning of control loops and Boiler control system. DCS Used: Alstom Alspa.
ALSTOM POWER EUB, Saudi Arabia
Instrumentation Supervisor- Commissioning 01 Sep 2006 to 30 May 2008
Project: Shoaiba Power Plant, Stage I, 3x385 MW, Saudi Arabia
Supervision of the instrument and electrical commissioning activities. Completed loop checks, energization of control panels, calibration of all steam boiler SMART instruments using HART Communicator in stage I. Supervised Insulation tests (IR test), Test run and Commissioning of LV and MV motors. Special focus on commissioning and testing of PETROL mass flow meters and hand held flow meters. Completed commissioning of control loops and Boiler control system. DCS Used: ABB Advant.
TEAMTEK, Ernakulum, India
Instrument Supervisor 1th July 1995 –31st Aug 2001
Project: Ammonia and Caprolactam Plant, (Petrochemical) FACT, Ernakulum. India.
Supervision of the calibration and installation of the all field instruments in the Ammonia and Petrochemical Plants (Caprolactam) under FACT (Fertilizers and Chemicals Travancore Ltd.). Loop test and precommissioning of field instruments via Honeywell DCS TDC-3000.
Full Name : RAJESH KUMAR ATHIKUZHY BALASUBRAMANIAN
Date of Birth : 01/04/1976
Sex : Male
Passport Number : S 5016695
Nationality : Indian
Marital Status : Married
Home Language : Malayalam
Driving License : Saudi Arabia, Indian (Four Wheel - LMV) Other Language : English, Hindi, Tamil
Permanent Address : 9/19, Choorappallam, Athikode,Chittur Thaluk, Palakkad District,
Kerala, India, Pin- 678552
Address for communication : Same as above
PC / SOFTWARE EXPERIENCE
Windows, MS office, Power Point Presentations
PMIS (Project Management Information System)
QMS (Quality Management System)
RS Logix, Siemens Step 7, Zentools
1.Mr. Cornelis, Site Manager – Fichtner GmbH
Mobile: +31-625******, Email: email@example.com
2.Mr. Chooi Kam Tat, Regional Mechanical & Electrical Leader, GE Power-China
Mobile: +60-111*******. Email: firstname.lastname@example.org
3.Mr. Shahili, Team Lead, GE, Yanbu 3 Project, Saudi Arabia,
Mobile: +966-*********, Email: email@example.com