Resume

Sign in

Engineer Design

Location:
Coventry, England, United Kingdom
Posted:
March 21, 2019

Contact this candidate

Resume:

Curriculum Vitae - Roberto Vicinanza

Aeronautical, Automotive, Energy, Space, Engineering/ Manufacturing /PMO

Telephone(s)

E-mail :

+44-077********

077********

ac8u0f@r.postjobfree.com

Work experience:

Present L&M Consultant – (Engineering) -United Kingdom

ESystem Engineer/Powertrain Engineer

E-System Engineer on Architecture of Vehicle Manufactures and IT Industry. Introduction of Technology such as autonomous Driving and Vehicle to Communication. Integration of full end-to-end gasoline and diesel engine management systems

including fuel handling, fuel injection, combustion, electronic controls, test and validation capabilities, electric

and hybrid electric vehicle.

OCT 2016 - DEC 2018 Jaguar Land Rover – Coventry (Engineering/Powertrain)

Development Engineer/Powertrain Engineer

Main activities and responsibilities

Transmission, E-Drive, Engine Modeling and Calculation . Electronics/Electrical Schematic Analysis. Electric Motors used in a Power Train of a Passenger Vehicle, it’s parts and components, such as winding systems, permanent magnets, rotor and stator, laminated magnetic sheets,cooling systems, reluctance analysis.

Design and Construction of Distributed Control Systems.

CAE Analysis, FMEA, Design and Validation on Component and Assembly.

Assist developing project specifications for function, timing, cost and quality.

Development of vehicle concept layout in assistance with the Vehicle Engineering and PMT

Managers.

Assist with the review and approval of Engineering releases from a Vehicle Engineering

perspective

EMachines Design Engineer, Electronics Design Engineering, RF Systems

Applications for Automotive.

Microcontroller, PCB Design and Simulation, IGBT, Diode, Sensors.

Schematic design and Simulation, Technical oversight of PCB layout, Testing & Integration with embedded software, Electrical testing, EMC and environmental testing, CE marking.

Digital electronic design, Design of Switching Mode Power Supply

Systems Engineering on Hybrid Electric Vehicles, Understand and drive design of motor electrical, mechanical, thermal, and motor control software architecture.

Developed algorithms Analysis for motor geometry optimization using Finite Element Methods (FEM).

Combined state of the art methodologies to maximize traction motor efficiency, driving torque, speed range and to minimize size.

Electrification and Edrive Integration, this focused on calibration/testing, development and delivery of Edrive and automatic transmission throughout their Integration into a wide range of vehicle platforms.

Experience in Cost Estimating, Delivery and use of appropriate tools

JAN 2015 - OCT 2016 LTI Vehicles -Bosch Enter.- Netherlands

Design/Software Engineer

Main activities and responsibilities

Modelling, design and calculation mechanical/mechatronics.

Studies of hybrid engine.

Dynamic simulations using numerical computing software (Matlab).

Modelling of a permanent magnet synchronous motor drives for dynamic simulation of vehicular propulsion.

Design and optimize the subsystems to predict the performance of the system for given goals and constraints.

Analysis of interaction of components of hybrid system, such as engine, battery, motor and power converter to control engine operation and generally reduce the energy consumption.

Electronics, RF systems design for controlling and communication.

PCB, micro-controller, transceiver design and simulation.

Hardware validation test plan, bill of materials, layout constrains, acceptance test procedures schematic design and simulation.

Technical oversight of PCB layout, testing & integration with embedded software, electrical testing, emc and environmental testing, CE marking.

FEB 2013 - DEC 2014/Gea Consulting - Automotive Industry Milan Italy

Powertrain/Lead Engineer

Modelling, design and calculation mechanical/ mechatronics on powertrain components.

Modeling, Design and EDS, CAN, Gateway, Lighting applications, wireless technology. Test, validation, documenting the steps of the product development process (requirements definition, concept design, detailed design, validation).

Performing and reviewing elementary structural and thermal calculations using fem analysis software.

Implementing requirements management with workflows and processes in accordance with internal development process (A-spice, ISO 262626).

Develop manufacturing processes/product that are compliant to ts16949 quality system

FEB 2012 - DEC 2012 Polaris/ ENEL SpA Milan Italy

System/Project Engineer

Modelling PDM/ equipment, cable systems, power electronics and structure.

Design and Management of activities with respect of Contract, Project Periodicity and Procedure. Electric Schemes analysis and comments.

FEB 2011 - OCT 2011 Magneti-Marelli (Powertrain) Milan Italy

Powertrain Engineer/R&D

KERS / turbo-compound application for motorsport.

Energy recovery, tolerance analysis, cinematic chain, working cycle and FMEA.

Mechanical design of component and assembly.

Structural analysis on mechanical components.

Drives balancing, strain and stress calculation on systems, vehicles dynamic calculation.

Powerpoint and result presentation, test activities.

Development or process engineer within a manufacturing environment.

R&D and integration in electronics/electro-mechanical manufacturing processes.

Design of switching mode power supply (smps)

Communication protocols: CANbus, ethernet;

complex engineering development including: requirements, design for manufacture, verification & validation.

Electronics, RF systems design for controlling and communication.

PCB, microcontroller, transceiver design and simulation.

Hardware validation test plan, bill of materials, layout constrains, acceptance test procedures

Schematic design and simulation, technical oversight of PCB layout, testing & integration with embedded software, electrical testing, EMC and environmental testing, CE marking.

APRIL 2010 - FEBRUARY 2011 Alcatel – Lucent SpA Rome Italy

System /Electronics Engineer

Main activities and responsibilities network, cloud, and communications solutions for customers in industries including education, railways, healthcare, hospitality, telecommunication and government.

Electronics/electrical schematic analysis. Design and construction of distributed control systems.

Rf path solutions including antenna, filter, fibre-optic, coaxial, and conduit product lines.

Work with mobile operators for designing and troubleshooting RF path solutions. Must have good understanding of standards and their applications in RF solutions.

Manage project opportunities specializing in design, network performance and cost analysis. Provide system design services to customer base utilizing external resources or internal staffing, as appropriate.

Support customer trials and Iots.

SEP 2008 - FEB 2010 Weir Oil &Gas Milan Italy

Design Engineer/PMI

Project planning and control.

Electric schemes & design.

Commercial activities.

Manufacturing of process pumps for oil & gas refinery, petrol - chemical and power generation industry.

Provide support to production and quality control of machining process.

Collaborating to the analysis of production efficiency data of determinate specific parameter relative to the machining process.

FEB 2007 - SEPT 2008 ENI Spa - Milan Italy

Proposal/Design Engineer

Project planning and control.

P & id’s design.

Commercial and proposal activities.

Structural and combustion calculation on equipment.

Industrial plants in combustion and fluid treatment.

Manufacturing in gas& oil and petrol-chemical sectors.

JAN 2005 - JAN 2007 Enginsoft Spa Padova Italy

Design Engineer /PMI

Industrial design, energy efficiency, thermo-fluid-dynamic applications (electric motors, blades, rotary machinery).

Material design for products.

Management activities, planning, manufacturing of energy systems.

Design & simulation of mechanical components.

Software integration & development

OCT 2003 – JULY 2004 NATO Headquarters Naples

Engineering/Project Management

Project management and engineering of NATO site.

Electric/HVAC and control systems projects.

Maintenance and design.

Design and management of project for NATO

Education and training:

SEPT 1996 - JULY 2002

University Studi of Salerno Engineering Final Mark 108/110; GDA: 28

Master’s degree principal subjects/occupational skills covered technology/mechatronics engineering

Structural calculation, thermal and mechanical surrounding condition, static and dynamic analysis, fatigue and damage phenomena.

Finite element modelling, knowledge of mechanical drawing.

Working rating and tolerance.

Thermodynamics, fluid-dynamics concept and application, turbo-machines knowledge.

Electric, electronics, automotive and vehicle studies and applications.

Ansys Inc. – Enginsoft SpA - Bergamo JULY 2005/MARCH 2006

Thermo-fluid-Dynamic Applications, Multiphase Modelling & Sim, Matlab Applications, Flux, FEKO, Thermal CFD Applications for Automotive

Engineering / CAE/ Electronics, RF Systems

JULY 2017 - Altair Engineering

APRIL 2017 - Mathworks USA

NAFEMS -University Coventry 2017

Personal skills and competences

Electronics, Electric Drive, Vehicles Dynamic, RF Systems, Wireless Systems and Mobile Applications, Mechatronics, Hybrid systems, Steering System, Engine.

Social skills and competences

Excellent ability in interacting with other people, good attitude to group work. Good skills in team coordination and group management. Excellent ability in organizing both personal and team work. Managing of complex situations ability

Technical skills and competences

Electronics, Electric Motors, RF Systems, Safety Systems, Control Engine, Vehicles, Chassis and Mechatronics

ECAD/AutoCAD

Solidworks

Catia v5,NX

Unigraphics,Solid Edge

Flux,FEKO, Acusolve, Fluent

FEM Ansys Workbench, Hyperworks

Matlab + Simulink

Programming:

C, Fortran,CANoe

Matlab, Phython

PLM: Enovia V5 LCA, PLM Software, Polarion, Rational Doors

Activities and Societies: Fitness, swimming, tennis, reading, networking, travelling, photos



Contact this candidate