Resume

Sign in

Pl 3D

Location:
Houston, Texas, United States
Salary:
28.00
Posted:
April 15, 2019

Contact this candidate

Resume:

Roderick Williams

**** ******* ***** **** ******* Texas 77068

Phone: 832-***-**** email: ac83tg@r.postjobfree.com OBJECTIVE:

Looking for permanent work, with a company that can best utilize my various skills as a Maintenance Manager, Maintenance Supervisor Lead Technician

EXPERIENCE:

PR Skills SERVICES Pasadena Texas

01/2019- present I&E maintenance Technician

Perform technical equipment repairs monitored by siemens controllers. Diagnose temperature controller PH probe calibrations equipment start failures pit sump pumps waste water treatment pumps seal and caustic delivery systems. Lawler’s Desserts Humble Texas

11/2016- 01/2019 lead maintenance supervisor

supervise maintenance repairs of food manufacturing equipment with GMP procedures. manage technical support to the manufacturing team.

communicate by outlook software. manage contractor quality assurance. manage 3 shifts 12-man maintenance crew. safety and equipment trainer. specialize in Hobart mixer repair, rebuild and modifications. Wabtec/ Link Staffing Houston Texas

01/2016 – 11/2016 electrical mechanical tech

Lead technician performing overhauls on PTRA locomotive rail cars. Duties involve complete dismantle of engine, radiators, cab, electric sensors traction motors, starters, aux motors, compressors, electrical control modules, and lights. 92-day inspection on undercarriage wheel, brakes, oil seals, and repair leaks Hvar system overhaul and computer diagnostics of all faults.

Allied Tube Co /Skilled Craftsmen’s of Texas Houston Texas 09/2014 – 01/2016

I&E Technician

Electrical and mechanical repairs on an automatic pipe thread processing system. Repair auto Swage machine with PLC drives hydraulic pumps cranes and hoist. High VAC 480 and 24 VDC circuits. PM conveyor furnaces and pipe auto banding system. Admiral Linen co Houston Texas

08/2014 - 09/2014 Maintenance engineer

Troubleshoot late model tumbler, washer, steam presser, conveyor line hooks and HVAC boilers. Repair pump motors, couplers pump alignments chain drive sheet folding machines, PLC control chemical distribution systems. Fab pipe fitting flow systems for steam, water. Troubleshoot hydraulics flow valves in an electro PLC integrated system. Perform root cause diagnosis of all equipment failure. Betco Scaffolds company Houston Texas.

06/2014 – 07/2014 Sky lift maintenance service technician Maintenance repair of RC3 cable hoist. Troubleshoot electrical failures and replace parts. Control board testing and load test procedures with remote control hook up. Service calls to site repairs of jam cables, brake clutch, blown capacitors and load lifting problems on site repair. Repair 30-amp 220 vac power cords, power booster transformers and a host of air hoist. Replace electrical contacts, motor bearings and worn cable guide plates. Bayer Pharmaceutical/TheFountaingroup Emeryville CA 04/2012 – 06/2014

I&E Technician

Maintain and troubleshoot various equipment connected to fault alarm system. Perform maintenance on pure water generators. pump water stations. Cooling towers inspections and PMs on HVAC air moving systems boilers and cooling compressors. Diagnose freezer temps 60 below. Siemens temp controller and touch screen equipment processor. Observe GMPs SOP, BASS, EXCEL, CMMS MAXPRO. Evergreen Oil

12/2008 – 06/2011 I&E Technician Supervisor Fremont, Ca. Oil refinery pipe, PVC instrument repair, build flow systems for refined oil production, in a recycling environment, on a contract basis through staffing companies. Responsible for leading teams of employees for various projects, up to 6 employees, pm programs, supervision, training, timelines, completion of projects, and related duties. Maintained various refinery equipment such as boilers oil pump. Sump pumps, rebuild pipe flow lines with valves. Manage leaks and pressure flow preventers

Williams Building Service (own business)

12/2007 – 11/2008 Building Maintenance Engineer Berkeley, Ca. Complete building maintenance on HVAC systems, boilers, electrical appliance, camera security surveillance installation and building air supply filter replacement. Remove and replace drive motors and drive belts and sheaves, for 7-11's, Quick stops, and various other commercial complexes. Davison Kennedy

02/2005 – 10/2007 Lead Maintenance Technician Atlanta, Ga. Preventive maintenance and repair of all train railcars, welding parts, components, various flux core duties, welding torch, repairing bent frames, installation of air brake modifications, and re-fabrication of wooden decks.

Self-contracted employee (various contract assignments) 10/2001 – 02/2005 Maintenance Technician California/Georgia Performed various contract assignments for staffing companies, with different high-speed manufacturing and production bottling, food processing, packaging, distribution companies, and facilities/building maintenance employment with companies such as: American Poly Foam of Georgia (01/2005 – 02/2005), Georgia State University (09/2004 – 11/2004), Bronco Wine/Barrel Ten, Ecolab, Rich Products-Rolling Pin Manufacturing, & UNICCO- Main Tech (06/2002 – 11/2004), and California State University of Hayward/East Bay (10/2001- 06/2002) Rich Product-Rolling Pin Manufacturing

Mechanical preventive maintenance, troubleshooting, repair, replacement, modification, and rebuilds on all high-speed bottling, food processing, packaging, and distribution equipment, conveyor, hydraulics, pneumatics, gearboxes, compressors, valves, pumps, labelers, bottling lines, packagers, palletizers, sealers, cappers, fillers, gluers, sorters, slitters, erectors, and other mechanical systems. Electrical troubleshooting and maintenance with robotics, speed drives, electrical 3 phase/480-volt, programming and troubleshooting PLC’s (Siemens, 550’s, 500’s), touch screens, timers, relays, starters, stoppers, and other electro-mechanical systems. Implement PM schedules and manage department budgets. American Poly of Georgia

Performed restoration project to rewire heaters and die machines, plastic extrusion equipment, 480 VAC, heater band testing, preventive maintenance and troubleshooting on AC brush motors, thermo controllers, and DC drives.

Georgia State University

Performed all commercial and facilities electrical renovation on office spaces, electrical supply panel at 277/120 VAC, electrical code wiring, lighting, smoke alarm systems. Cal State East Bay University

Maintained and managed all building air quality, preventive maintenance on all speed drives, exhaust fan motors, air supply motors, boilers, calibrate, thermostats controllers, building air balance procedures. Perform touch screen testing on energy management system computers, testing of pump motors throughout campus heating and air systems. Document pressure readings, troubleshoot valve leaks, system malfunctions, estimate repair costs, and report to director various downtime on repairs. Otis Spunk Meyer

01/1994 – 10/2001 Maintenance Supervisor San Leandro, Ca. Preventive maintenance, troubleshooting, and repair on all muffin line, cookie, and bread production lines and equipment, high-speed conveyors, labelers, printers, auto box erection machines, vacuum pumps, stretch wrapping equipment, large pumps, lighting systems, chillers. Performed graveyard shift supervisory duties running production personnel, equipment changes overs, and maintenance schedules.

Gray Lines Bus Company

04/1988 – 01/1994 Bus Mechanic So. San Francisco, Ca. Perform preventive maintenance on buses at 6,000/12,000/24,000 miles inspections. Troubleshoot electrical systems, air brake systems, oil changes, tires and test-driving duties. Test and repair wheel chair lifts and kneeling systems with under carriage air bag replacement. Test drive buses for proper brake operation with brake gyro counter unit. Alameda Naval Base

02/1987 – 04/1988 Facility Electrician/Technician Alameda, Ca. Maintain all Northern California electrical and mechanical repairs including lights, roof top compressors, chillers, HVAC systems, motors, thermostats, air supply energy management systems, speed drives, controllers, and water pumps.

United States Navy

03/1983 – 02/1987 GSE ground support technician various locations Performed all aviation Ground support electrical Technician duties. Troubleshoot and repair electronic speed regulator for aircraft charging units, Pm NC8 aircraft tow tractors, diesel engine repair and replacement, repair diesel air governors gasket leaks and engine motor mount bushings. Circuit board repair of transistors and diodes. Test bench dc and ac supply loads for troubleshooting purposes. EDUCATION:

ICS University, Scranton, Pa., 1987

Associate of Arts Degree-Electronics

Blunt High School, Mobile, Al., 1978

High School Diploma

CERTIFICATIONS:

United States Navy, Various locations, 1986

Certified Electrician

Certified Grad all telescopic boom lift driver

Certified fork lift Driver Komatsu 40/25 E/G25

Twic card holder

California State University of Hayward/East Bay, Hayward, CA, 2005 Wastewater Management Certification

Hazardous Waste Management Certification

References Available Upon Request



Contact this candidate