Resume

Sign in

Technician Plant

Location:
Batangas, CALABARZON, Philippines
Posted:
April 13, 2019

Contact this candidate

Resume:

Manolito Ramos Bautista

ac823k@r.postjobfree.com

Bauan Batangas Philippines

+63-915******* / +63-908*******

Senior Instrument Technician

Aims and objectives

To meet schedule of work as early as possible with respect to quality assurance and safety.

To be a part of industry where I will use my ability and experience

Work Summary

Over 17 years of working experience in related discipline for instrumentations and electrical in Offshore and onshore project local and abroad.

Project exposed mainly such as; Power generating plant, Gas compressor station, LNG Plant, Petrochemical, Non Associated gas plant, Well heads and Production platform for oil and gas industry.

Assigned task job involved in E&I work during Constructions, Pre-commissioning and Commissioning Stage, as well as on the Start-up sequences.

Embedded into the commissioning team for delivering fully operational production facilities,

Evolve into a dynamic maintenance work to replace and rectify of worn damage failed equipment and instrument component to maintain reliability and support role through start-up to steady state operations.

Monitoring controlled and measured during actual period of test, loop checking as well as cause & effect.

Compliance with HS&E policies and safety standard procedure

Skills

Ability to read and interpret P&IDs, hook-up drawing, loop and logic diagrams as well as part list

Expertise in calibration and configuration of electro/pneumatic type precision digital-pneumatic valve controller, field various type of process measuring device transmitter, UV/IR fire & gas detectors and vibration probe device system etc.

Identify diagnose technical problem by using logical trouble shooting techniques,

Familiarize and knowledge to carried out permit to work system

Can work as part of a team or as an independent

Able in computer job operation

Employment Record

Colliers International Services October 16, 2017 to present

Client Chevron Philippine Inc

San Pascual Batangas Philippines

Instrument Technician Maintenance

Job Details

To ensure strict adherence to all safety pre-requisites and arrangements for all people at site, plant and environment

Planning, scheduling and execution of preventive maintenance activities, modification as per job orders

Fault finding and fault analysis of field various instrumentation systems.

Bench and field calibration, interlock checking, preventive and corrective maintenance activities for all

process control instruments

RAH / Target Oilfield Energy Services LLC. April 2011 - July 2016 Enhance Oil & Gas Recovery Project

Client Occidental Petroleum Inc.

P.O Box 717 Al Athayba

Sultanate of Oman, Muscat

Instrument Technician

Job Details

Assisted process commissioning team during start-up period to test integrity & reliability of the Gas plant/Well head prior to hand over to operations.

Provide technical direction for proper Instrument protection during shut down and start-up period

Diagnose, investigate and do a remedial work on instrument failed issue to complete such work

Support client-side maintenance technicians with troubleshooting and repairs as needed to minimize equipment downtime

Follow HES guidelines on the project at all times and to ensure all work is carried out in a safety manner.

Sign-off and accept test Instrument report and/or certification.

(WAGP) West African Gas Pipeline November 2009 - December 2010 Gas Compressor Station Project

Client: Chevron & Shell Development Co. of Nigeria

Ajido Badagry Lagos, Nigeria

E & I Inspector

Job details

Logging all relevant inspection records into a possible work package to be handed over to the client.

Monitoring site inspections to make sure right materials are used, as well as that works on site are done accordance to the specifications.

Making sure all ITR, NCR, check sheets, punch listing records are close out prior to the completion of work package before being handed over to the client.

Planning daily & weekly routines for inspection surveillance of contractors.

Review company specifications quality records to ensure compliance effected on activities.

Assisting on the development of electrical & instrument dossiers and handover books to the client.

Maintain HSE compliance at all stage of work scoop.

Provide daily and weekly report

Alcon Nigeria Ltd. February 2007 - August 2009

Integrated Gas to Power Generation Project

Client Shell Petroleum Development Co.

Aba Road Expressway Port Harcourt Nigeria

Senior Instrument technician

Job details

Functional checking of all instrument and controls and verify loops & logic are corresponded to allocated channel on PLC/SGS/HIPPS/F&G and in all measuring device as per client specs.

Assigned to update for on-going site construction activities to meet client schedule of work as early as possible with respect to quality assurance and safety.

Assist for reworking, repairing and modifying non-conforming equipment

Support loop check process and be a subject matter expert for all instrumentation related issues

Replace and rectify of worn damage failed equipment and instrument during pre-start-up operation

Review instrument installation and hook up design issue

Assist vendor and operation team during start-up period

Logging of all daily activities as well as check sheets in activities done

Maintained proper housekeeping activities for daily of work activities

Willbros Group Inc. Nigeria Ltd. August 2005 - March 2006

AMENAM KPONO Gas exporting project

Client: Total FINA ELP Petroleum Nigeria Ltd.

Port Harcourt River State Bony Island, Nigeria

Instrument technician

Job Details

Rectify and troubleshoot all faults to support plant operation during start-up sequence.

Provide support to process team in determining critical Instrument assets

HMI monitoring of feedback and control of all associated field instrument @ the plant during pre-commissioning and commissioning stage as well as cause and effect sequence

Point to point wire checking to ensure that it goes to the proper place as per drawings required

Technically aces the requirement of allocated job and necessary tools or equipment to complete of such works.

Loop simulation of signal on actual logic test during cause and effect activities base on drawing and client’s

procedure.

Carry-out of instrument check sheet,as built drawing activities and other related document

Willbros Group, Inc. Nig. Ltd August 2004 – August 2005

On-Shore Gas Gathering System project

Client: Shell Petroleum Development Co. of Nigeria

Port Harcourt River State, Bonny Island, Nigeria

Instrument technician

Job Details

loop checking of signal feeds to PLC/ESD I/O module card and verify if it goes to the corresponding channel

Performed field and bench calibration of field various instrument.

Assigned in pre-commissioning and commissioning activities.

Rectify and troubleshoot all faults to support plant operation during shut-down period

DIETSMAN TECHNOLOGIES SETRAM, Intl. January 2004 - May 18, 2004

Revamping and Production Oil wellhead platform project

Client: Chevron Texaco

Sanha Condensados project /Cabinda Angola

Instrument Calibrator

Job Details

HMI monitoring and verify if all process instrument are all configure by automation during pre-commissioning sequence.

Re -configure and calibrate of various field instrument.

Simulation of loop signal feeds to PCS I/O module card to confirm and receive data in DCS and rectify if fault find occur.

Installed of additional safety barrier, re-wire and put in service during pre-commissioning stage.

Dresser Rand Nigeria Ltd. July 2002 – September 2003

NGC Gas Compressor and land facilities area

Client: Shell Petroleum Development Co. of Nigeria

Barroid Yard Sedco Road Enerhen Warri Nigeria

Instrument Technician

Job Details

Assigned in calibration workshop to conduct any required inspection, testing of process instrument prior to ensure that material and component are returned to operation condition

Carrying out of maintenance work,, rectify and repair of protective measuring process equipment installed on site.

Conduct bench and field calibration of instrument, re-configure, loop and functional checking, pre-com and

commissioning activities as well as on the start-up sequence.

Dresser Kellogg Energy Services April 2001 - September 2001

(AGGS) Associated Gas Gathering System Project

Client: Shell Petroleum Development Co. of Nigeria

Aba Rd. Express Way Port Harcourt, Nigeria

Instrument Technician

Job Details

Assist vendor and operation during commissioning and start-up period

Performed leak testing of impulse tubing and verify if occurs at every point of each connection

involved loops and functional test of instruments during pre-commissioning activities

Carry-out of instrument construction work on site.

Bechtel International Inc. May 1999 - November 1999 GR-1 / GR-2 Gas Compression Station Project

Client: SONARCO of Algeria

B.P.387, Hassi Messaoud, Wilaya De Quargla, Algeria

Instrument Technician

Job Details

Technically aces the requirements of allocated job and necessary tools and test equipment to complete such work.

Installation of field various process measuring device as per hook-up installation, stanchion instrument support as well as leak testing of impulse tubing at every connection point

involved loops and functional test of instruments during pre-commissioning activities

Carry-out of instrument construction work on site.

(MIESCOR) Meralco Industrial Services and Engineering Corporation March 1999 - May 1999

Sta. Rita 1000 MW CCPS (Combined Cycle Power System)

Client: SIEMENS Inc. Philippine’s

Sta. Rita Batangas City Philippine’s

Instrument Technician

Job Details

Assigned for the installation of measuring protective device, fire and gas detectors and various instrument @

power gas turbine generator.

Bechtel International Inc. August 1995 – February 1997

(GL1-Z) LNG Plant Renovation project

Client: SONARCO of Algeria

Bethioua, 31210 Wilaya D, Oran Algeria

Electrical / Instrument Technician

Job Details

Diagnose, troubleshoot and maintained electrical work on low and high voltage equipment, including switching and distribution, variable frequency drive and DC speed control equipment

Involve in plant refurbished to repair, modified in the installation of field various instrument and equipment panel, controller, valves and others.

assist commissioning team during start-up period sequence

Work in cable pulling, dressing, gland and termination of power and instrument cables, on MCC/PLC/PESD

panel and in field junction boxes etc.

Atlantic Gulf & Pacific Co. December 1989 – July 1992

UNOCAL and ENRON Production Platform

Client ONGC India

(BHFY) Batangas Heavy Fabrication Yard

P.O.Box 1232 MCPO 0790

San Roque Bauan Batangas

Philippines

Electrician

Job Details

Carrying out of all electrical equipment installation, construction and maintenance scope of work assigned.

Repaired a variety of power tools,alarm circuits security system and fire alarm devices

Educational Details

Technical course of Electricity

Pablo Borbon Memorial Institute of Technology, Philippine’s

Seminar and training attended:

Calibration for Process Instrumentation (MFI) Meralco Foundation Institute

Basic Process and Controls Ortigas Center Pasig City of Manila

Lock-out / Tag-out Safety Procedure LNG Plant at Bonny Island Nigeria



Contact this candidate