Resume

Sign in

Mechanical Engineer Project

Location:
Fereej Ibn Dirhem, Qatar
Posted:
December 01, 2018

Contact this candidate

Resume:

PHILIP CYRIL M. DOLIENTE,RME

Doha,Qatar

Contact No.: +974********

E-mail: ac7udg@r.postjobfree.com

POSITION APPLIED: MECHANICAL ENGINEER

CAREER OBJECTIVE:

To be a part of a prestigious company wherein I can share and utilize my knowledge in designing and installation acquired from my previous employment for the advancement of the firm and the people associated with it. To enhanced my knowledge about fire protection system.

EDUCATION:

1999-2004 Bachelor of Science in Mechanical Engineering

University of the Visayas

Cebu City, Philippines

SKILLS AND COMPETENCIES:

Has 12 years of experience as a Mechanical Engineer.

Registered mechanical engineer Philippine Regulation Commission.

Fire fighting Engineer handled Wet sprinkler system, FM 200 system, NOVEC system, pre action and deluge system.

Attending Fire protection for high rise building and special structures seminar & workshop conducted by SFPE QATAR.

Attending Warehouse storage fire protection system seminar conducted by Philippine society of mechanical engineers Qatar chapter.

Experience in major high rise towers, commercial buildings, school, hotels, residential developments and airport.

Strong numeracy and financial management skills and the ability to learn sophisticated design and costing it packages;

Have a knowledge in hydraulic calculation.

Have a knowledge about drainage, HVACand water supply.

Proficient in Autocad

Fluent in written and spoken English.

Able to handle multitask responsibilities.

PROJECT INVOLVES:

People Mover System (Qatar Foundation)

LRT Project lusail

Wajba Palace

Internal Security Force CP05

Internal Security Force CP07A

Lusail Development Super Substation

Porto Arabia Parcel 3A & 3B Residencial building 21 storey

Al Areen Tower, Doha Qatar

Paris Sorbonne University, Abu Dhabi U.A.E.

U.A.E University, Al Ain U.A.E.

Chief Executive Villa,Dubai U.A.E.

Mark Spencer, Dubai U.A.E

Etihad Terminal 3, Abu dhabi U.A.E(make as built drawing using SCADIA format).

Khalifa Port Industrial Zone, Abu dhabi U.AE.

Air Craft Maintenance Hangar – Qatar New Airport

WORK EXPERIENCIES:

QATAR INTEGRATED BUILDING SOLUTION W.L.L.

FIRE PROTECTION DESIGNER & CONTRACTOR

Doha Qatar

Project Mechanical Engineer October, 2012 to Present

Duties and responsibilities.

Responsible for all fire fighting works at Site.

Review drawings and site inspection prior to proceed.

Recommend technical requirements at site to comply NFPA and QCDD.

Prepare material take off required in the project and ordering the material thru procurement.

Prepare method of statement required in the project.

Prepare Testing Commissioning procedure.

Updates works progress at site in weekly basis.

Attending inspection with the consultant and contractor.

Attending meetings in the client.

Prepare inspection request with complete attachment to be submitted to the consultant for site inspection approval.

Prepare MDS inspection.

Prepare O & M manual for handing over of the project.

Preparing monthly progress report and getting signature client approval.

Monitor manpower in daily basis according to site work requirements.

Coordinate to other services for site installation works.

Recommends changes for improvement in the system, methods and procedures.

Perform any related duties assigned from time to time.

ADCC

AKTOR AL - DARWISH CIMOLAI CYBARCO JOINT VENTURE

New Doha International Airport

Mechanical Drafstman May 2011 to September 2012

Duties and responsibilities:

Ensure correctness of the builders works drawings and the coordination of the MEP works with the structural and architectural requirements.

Check complete drawings according to the final drawing register.

Make shop drawing for Plumbing, fire fighting & HVAC.

Prepares drawings required for government permits and utility companies.

Recommends changes for improvement in the system, methods and procedures.

Prepare and make As Built drawings to be submitted on time as per project requirements.

BLUE EAGLES DESIGNERS LLC

ELECTRO-MECHANICAL DESIGNERS

Deira, Dubai, UAE

Mechanical/Plumbing Engineer August 2009 –May 2011

Duties and responsibilities:

Prepares complete plans for piping/plumbing mechanical shop drawings; constructing the design plumbing/piping system of the project using autocad software including complete details, elevations and section as per requirements which are submitted to consultant’s approval.

Responsible in preparing detailed as-built plumbing & mechanical plan as per building requirements for Consultant’s approval to be submitted upon turnover of the project.

Coordinate plan changes and details with Architect.

Prepares MEP builders work & composite drawings.

Prepares bottom of ducts & level of pipes.

Check complete drawings according to the final drawing register.

Ensures and maintains quality of finished drawings.

Responsible for all the updates of plan for whole project durations in case of revisions as per discussed and agreed by the Consultant.

Discusses equipment selections with manufactures representative, Engineers, and Project Managers.

Supervise in making shop drawing for Plumbing & Mechanical works.

Coordinate the mechanical layout with other trade i.e structural, ductwork,

electrical & interior design.

Prepare mechanical layout from single line diagram conceptual sketches &

Engineering instruction.

Develops plant room layouts and sectional details.

Basic knowledge of different mechanical equipment in terms of functions.

Prepares ducts sizing according to demand.

Conduct site verification as required.

Maintains and updates electronic and manual records of the company.

Recommends changes for improvement in the system, methods and procedures.

Perform any related duties assigned from time to time.

THERMO LLC

ELECTRO-MECHANICAL COMPANY

Jebel Ali, Dubai, UAE

Mechanical Engineer November 2008 to July 2009

Duties and responsibilities:

Coordination and administration of MEP related materials, equipments and drawing submittals.

Ensure correctness of the builders works drawings and the coordination of the MEP works with the structural and architectural requirements.

Ensure that the project MEP is carried out in accordance with the required quality and within the cost and time constraints.

Check complete drawings according to the final drawing register.

Ensure that the MEP work is executed in accordance with the contract drawings, specifications, agreed procedures and method statements.

Review, control, and approve the MEP work procedures and method statements.

Responsible for all the updates of plan for whole project durations in case of revisions as per discussed and agreed by the consultant.

Supervise in making shop drawing for Plumbing & mechanical works.

Prepares drawings required for government permits and utility companies.

Recommends changes for improvement in the system, methods and procedures.

Ensure that the MEP Team provides and adheres to the necessary QA control documentation in accordance with the agreed procedures.

Ensure that As Built Drawings, O&M Manuals and related documentation are prepared, reviewed, submitted and approved in a timely manner and in accordance with contract requirements.

Checking that MEP valuations correspond with progress.

QATAR TECHNICAL SUPPORT

ELECTRO-MECHANICAL COMPANY

Doha, Qatar

Mechanical Engineer April 2007 to October 2008

Duties and responsibilities:

Supervise MEP workers at Site.

Coordination and administration of MEP related materials, equipments and drawing submittals.

Ensure correctness of the builders works drawings and the coordination of the MEP works with the structural and architectural requirements.

Ensure that the MEP work is executed in accordance with the contract drawings, specifications, agreed procedures and method statements.

Review, control, and approve of MEP work procedures and method statements.

Ensure that the project MEP is carried out in accordance with the required quality and within the cost and time constraints

Prepares drawings required for government permits and utility companies.

Ensure that the MEP team provides and adheres to the necessary QA control documentation in accordance with the agreed procedures.

Ensure that As Built Drawings, O&M Manuals and related documentation are prepared, reviewed, submitted and approved in a timely manner and in accordance with contract requirements.

Checking that MEP valuations correspond with progress.

PERSONAL DATA:

BIRTHPLACE Madrid, Surigao del Sur

BIRTHDATE July 10, 1982

GENDER Male

CIVIL STATUS Single

CITIZENSHIP Filipino

DIALECT SPOKEN English, Tagalog

PASSPORT DETAILS EB4971948

DRIVING LICENSE QATAR



Contact this candidate