Sign in

Electrical Engineer Project

Doha, Doha, Qatar
November 05, 2018

Contact this candidate


Page *

Mob: +974-********


Doha – Qatar


Project Electrical Engineer - Project Management Team B.Sc. Electrical Engineering

M.Sc. Engineering Management

Career Objective

Project Electrical Engineer with 11+ years of diversified experience as a project leader for several major oil and gas projects in Qatar with core competencies in project management, interface management, construction, engineering & commissioning for EPC projects. Seeking a position to implement twin benefits of acquired expertise and industry savvy to catalyze key projects in the field.

Summary of Experience

Worked in Qatar Gas Project Management team (PMT) - 2008 to 2018 Major Projects & Achievements:

Qatar Gas 3&4 LNG Trains - QCS (On/Off Shore) Project.

Qatar Gas & Qatar Petroleum – Power Tie-in Project

Qatar Gas Jetty Boil off Gas - JBOG Project

Qatar Gas & (National Power Generation & Distribution) – Kahramaa – 132kV Project

Qatar Gas – EPC Projects QG-2, 3, 4

Qatar Gas – Feed Projects Qatargas-1

Professional Experience

Qatar Liquefied Gas Company

Electrical Engineer –QG Projects June 2014 – April 2018

Led Electrical Engineering and construction of projects.

Managing and execution of work and ensuring project schedule and milestones.

Working on cost optimization and presenting alternatives to senior management.

Management of man hour budgets, contract changes and schedule delivery.

Supervising preparation of discipline scope of work, SLDs, block diagrams and ELICS system integration.

Responsible for all project electrical design e.g. electrical load list, sizing LV, MV cables, Transformers, Motors, Switchgears, lighting and small power distribution, battery chargers etc.

Reviewing vendor documents; attending factory acceptance tests at vendor facilities.

Coordination and interface with all disciplines on engineering to ensure technical objective is met.

Handling electrical engineering issues, responding engineering technical queries and site technical queries in live plant.

Developing and monitoring the project execution plan (Electrical) coordinating with planning, contract and procurement divisions.

Monitoring contractor performance, assisting contractors in meeting objectives to ensure that overall project cost & schedule milestones are achieved.

Coordinating with the safety and QA/QC departments during the construction activities of the project to ensure all guidelines were adhered to.

Carrying out multi faced duties related to electrical modifications for tie-in works in Qatargas live plant coordinating with operations team.

Guidance and mentoring junior staff (Trainees) during project execution. Page 2

Attended factory acceptance test of Medium voltage cables, low voltage cables, fiber optics, and transformers

& Medium Voltage switchgears at ABB factories during detail engineering.

Witnesses FAT of Variable frequency drives at ABB facility & UPS and battery chargers at Gutor facility & ELICS system at ABB facility.

Led construction and installation of all electrical equipments as per project ITP.

Led pre-commissioning activities as per electrical SAT procedure and approved MS.

Ensured all commissioning activities are executed as per FRA (field risk assessments).

Led electrical PSSR prior to energize electrical equipment.

Develop electrical system completion mapping system to monitor project completion.

Conduct electrical safety studies (SAFOP) and contribute in HAZOP & HAZID studies.

Worked on FEED of Project for Qatargas 1 and evaluated bidders.

Have complete knowledge on project tendering and technical bid evaluation.

Led FEED SOW preparation for electrical discipline involving site surveys, plot allocation for electrical equipment and estimating electrical quantities and preparation of contract documents. Electrical Engineer – QG JBOG Project

May 2011- May 2014 (Jetty Boil-off Gas Project is among the largest environmental Oil & Gas Projects – 1 Billion USD)

Worked as an Electrical Engineer on Qatar gas Jetty Boil off Gas (JBOG) Recovery Project in engineering/design & construction/commissioning of electrical systems and had following responsibilities.

Led substation design & electrical automation systems.

Managed project lesson learned implementation and risk register.

Led technical bid evaluation (TBE) and ensuring project specification and quality requirements are met.

Preparing basic SOW in house and preparing a cost estimation on the basis of design.

Contractor’s evaluation during tender stage and responding technical queries to ensure compliance.

Reviewed contractor’s design documents as per CPY standards and specifications.

Led all electrical installations on site, coordinating and ensuring all electrical equipment erected as per standard drawings.

Supervisor for installation of distribution boards, battery chargers, low voltage switchgears, lighting, instrument distribution boards, electrical and instrument cables etc.

Worked on electrical interfaces between Qatar Gas, Qatar Petroleum (RLIC) and Kahramaa (Qatar national power company) -132KV related technical issues.

Coordinated with instrument discipline for control system integration with electrical systems.

Coordinated with electrical equipment vendors on all engineering issues ensuring timely execution of work.

Managing technical and safety risk assessments on LV & HV power Tie-in.

Planning of all electrical construction activities and monitoring contractor’s work progress in installation and commissioning of electrical equipment.

Performing electrical inspection as per inspection test plans of the project during construction, pre- commissioning and electrical system startup.

Site surveillance of electrical activities and capture punch items for smooth startup.

Worked on emergency power supply requirements on site with EDGs.

Led 11KV permanent power supply tie-in Project with Qatar Petroleum substations.

Support to turn over and completions team to develop electrical systems and sub systems in order to monitor progress.

Coordinating protection relays testing and commissioning.

Supervising cathodic protection system installation.

Worked on Electrical control system design, installation, testing and pre-commissioning.

Attended High Voltage Cable factory acceptance test. Page 3

Electrical Engineer - Qatar Gas-3&4

2008 - March 2011 (Multi-billion integrated LNG Project. QG3&4 LNG Project comprised of two 7.8mmtpa LNG

trains, three offshore platforms, LNG, LPG, condensate storage tanks and Sulphur granulation facilities)

Worked as an Electrical Engineer on LNG Trains (Qatar Gas), having responsibilities of electrical installations on QCS

(Qatar Gas ConocoPhillips and Shell) Project onshore/offshore and had following responsibilities:

Preparation of design documentation with respect to hazardous area classification and design specification of the project.

Conducting risk assessments prior to commence electrical activities.

Coordinating with other disciplines in building substations on site.

Preparing construction and commissioning procedures to carry out PMC activities.

Preparation of electrical completion systems in order to monitor project progress and milestones.

Installation & testing of motors, cables, lighting distribution panel, grounding system, transformers, battery chargers, switchgears and emergency diesel generators etc.

Ensuring testing of switchgears in accordance with IEC standards and approved MS.

Performing testing and commissioning of electrical system between upstream and downstream both on and off shore locations.

Testing & Commissioning of Medium Voltage & Low Voltage equipment (SAT).

Quality inspection in accordance with approved ITP (Inspection Test Plan).

Performing site surveillance to ensure quality work executed by contractors.

Monitoring contractor performance, assessing work progress in accordance with the schedule.

Supervision of day to day site activities based on RFI (Request for Inspection).

Identify quality non-compliance issues and issuance of NCR.

Responsible for equipment installation, energization prior to conduct PMC activities.

Electrical Discipline DCC and System walk down SMCC to capture outstanding items as punch items and transfer to WINPCS (Software) for project records.

Update drawings & review documentation for turn over system completions.

Worked as QA/QC support to Electrical site activities making sure all Electrical installations as per approved standards & ITPs in construction phase.

Electrical Control System Engineer

(Qatar Gas-3&4)

Worked as an Electrical Engineer for Electrical Integrated Control System (ELICS) for QG3-4 project and has following responsibilities for commissioning activities

ELICS (Electrical and Integrated Control System) and PMS (Power Management System) testing in accordance with specification and coordination with other Electrical Systems, VFD PMS, Generators PMS.

Establish communication with relays within Network to Main Control System ABB 800XA via different protocols

Preparing reviewing Method of Statements (MS) of different rated Switchboards e.g. 415V, 6.6KV, 33KV and 66KV prior to start ELICS activities.

ELICS logical and graphics testing as per design and Specification.

Monitoring Contractor’s and vendors’ quality control effort on overall ELICS system.

Monitoring System and troubleshooting Electrical Control System.

Design and testing of Plant Essential Power Distribution Control System EPDCS for Black Start up. (Emergency Diesel Generators)

Worked on overall generation Control system (Power Management System).

Working Experience in MICRO SCADA SYSTEM, RTU & 800XA SYSTEM.

Working Experience in communication tools ABB Micro SCADA tools, LNT 1.1.1 (Lon talk Network Tool), 61850 Protocol

Experience in various types of protocol to communicate with Relays within a Network – RS232, RS485, Ethernet, Wireless, and Optical Fiber.

Page 4

Expansion Startup Support

Troubleshooting ELICS and PMS system assisting Qatar Gas Expansion Startup Team to start the Utilities and LNG Trains safely / successfully and to bring them in to production. Implementations of all necessary Modifications MOC to make the system reliable and smooth.

Electrical Engineer

Qatar Foundation Projects 2007

Worked as an Electrical Engineer on construction projects, having overall responsibility of electrical installations and has following experience:

Project tender document preparation to bid for the project.

Preparation of bill of material and evaluate equipment suppliers.

Reviewed offer and evaluate cost and prepare base schedule.

Site supervision of Electrical construction work in coordination with Civil and Mechanical activities.

Preparation of Electrical coordinated drawings with other disciplines to conduct initial site works e.g. Electrical Trenches, cables with other services.

Technical & price evaluation of electrical equipment, correspondence for materials & material submittals

(electrical) as per specifications.

Punch listing and clearing of incomplete installation.

Review plan and drawings and make necessary changes in accordance with specifications & standards.

Ordering electrical material as per shop drawings & specifications.

Inspection & testing of MV panels & Transformers in factories (FAT) Skills

Knowledge of Electrical distribution and transmission systems.

Knowledge of system protection design.

Creativity to develop new approaches or alternatives.

Ability to make independent studies, analysis, interpretation and conclusions.

Sensitivity to the cost requirements of the project.

Project Management Professional (PMP) Trained

Worked as IIF Coach, conduct electrical safety inspections and had record of zero electrical incidents on QG3-4 Project.

Safety Trainings

Plant Safety Induction

H2S Effects and B/A Set

Permit to work

Confined Space

Task instruction Training and its implementation in accordance with activities

PMC Premechanical Commissioning

Defensive Driving Certified

IIF Coaching

Fire Fighting

Environmental Awareness

Waste Management

RAS GAS Training (Safety Induction, Hydrogen sulfide Escape BA, PTW)

RAS GAS Job Safety Analysis

Heat Stress

Emergency Building Evacuation

Hazard Recognition

Port Security Awareness

Qatar Gas Management System Improvement

Office Safety

Page 5

Qatar Petroleum Permit CPW/ECPW

National Power Distribution-Familiarization training

Stop Card Safety Training

Computer skills

MS Office

MS Project

ABB MicroScada



Driving License

Qatari driving license Valid

Personal information

Gender: Male

Current Residence: Qatar

Marital Status: Married

Visa : Resident Permit



Excellent command in spoken / written


Gamal Hashim

(Head of engineering and quality – Qatar Gas)

Alejandro DeJong

(Project Manager - SHELL)

Contact this candidate