Resume

Sign in

Engineer Quality

Location:
Pune, Maharashtra, India
Salary:
500000
Posted:
May 31, 2018

Contact this candidate

Resume:

CURRICULUM VITAE

UMESH KUMAR TRIVEDI

House no.**1, Near Ranjandevi Temple, Mobile No:-+91-997*******

Sec. 9, At Post-Koperkhairne, +91-771*******

Navi Mumbai, (Maharashtra) 400709 Email:-ac5ovz@r.postjobfree.com

CAREER OBJECTIVE:-

I am seeking for a Technical Career in Mechanical Engineering (QA/QC-NDT) field in a Progressive environment as well as my best Knowledge & Experience in Line pipe, Pipe Lines, Boilers, Pressure Vessels, Storage Tanks, Heat Exchangers, Ships (Building & Repair Division) & Steel Structural fabrication for Oil, Gas and Petrochemical projects and to work with an organization to the repute and strength my inherent Quality, Skill and Experience for the betterment of my future and that of the organization. I am responsible for making Quality to meet our customer requirements.

TECHNICAL QUALIFICATION:-

A.S.N.T. Level II in Ultrasonic Testing from Forum Consulting School of N.D.T. Mumbai.

A.S.N.T. Level II in Radiography Testing from Forum Consulting School of N.D.T. Mumbai.

A.S.N.T. Level II in Magnetic Particle Testing from Forum Consulting School of N.D.T. Mumbai.

A.S.N.T. Level II in Penetrate Testing from Forum Consulting School of N.D.T. Mumbai.

A.S.N.T. Level II in Visual Testing from Forum Consulting School of N.D.T. Mumbai.

Certified Welding Inspector seminar attend From Testing Technology. Mumbai.

ACADMIC QUALIFICATION:-

Diploma in Metallurgical Engineering in from CMJ University Meghalaya.

Diploma in Mechanical Engineering in from National Institute of Engineering.

Senior Secondary School Certificate in from Board of Secondary Education (Raj.)

Secondary School Certificate in from Board of Secondary Education (Raj.)

Experience :-

More than Ten years’ Experience in QA/QC-NDT department for Testing and Inspection.

1.Currently working as Quality Engineer with Topworth Pipes and Tubes Pvt. Ltd. Khopoli, (Maharashtra) From 1st November 2017 to till Dated.

2.Three years Seven months worked Surveyor Engineer with International Certification Services. (ICS) Pvt. Ltd. Mumbai, (Maharashtra) From 21st May 2014 to 31st October 2018.

3.Four years Five months worked as Engineer (NDT) with Pratibha Industries Ltd. Wada, Distt. - Thane, (Maharashtra) From 20thDec. 2009 to 17 May 2013.

4.Two years Ten month worked as Inspector (NDT) from 17th Feb. 2007 to 17th Dec. 2009 in Welspun Gujarat Stahl Rohren Ltd. Versamedi, Distt.- Kutch (Gujarat).

5.Two years six month worked as Inspector (NDT) from 08th April 2004 to 15th Feb. 2007 in PSL Ltd. (QIX Pvt. Ltd.) Versana, Dist. - Kutch, (Gujarat).

SHUT DOWN TURNAROUND ASIGNMENT:-

6.Forty Five days worked as Inspector (QC-NDT) from 27thSeptember 2012 to 10th October

2012 with Dry docks World-Dubai (UAE).

COMPANY PROFILE:-

The Topworth Pipes and Tubes Pvt. Ltd. is one of the advanced spiral mill & coating plant in the world, designed by ATIS Germany and manufactured by INITECH Korea. Manufacturing is carried out in safe and healthy conditions to the International Standards of ISO 14001 and OHSAS 18001. The company is accredited with API 5L, API Q1, ISO 9001, ISO 14001 and OHSAS 18001 certifications.

The company's two step HSAW pipe mill is equipped with world class (GE Make) NDTs and Laboratory facilities. Coating plant has an integrated coating unit having full-fledged end-to-end facilities for inspection and testing. This ensures production of high quality standard products which cater to the requirement of its worldwide Clientele of high pressure / critical application segment.

JOB PROFILE:-

Preparation of the calibration drawing & calibration block on the basis of various standards.

Manual Ultrasonic Testing of Plates & Pipes and prepare inspection reports.

Up keeping Calibration records of all Instruments which are being used for Testing & Welding.

Welding inspection Before, During and After welding parameters according to approved WPS and PQR.

Carried out Visual & Dimensional Inspection of incoming Raw Materials (HR Coils), after milling, after welding at Pre-visual & Final Visual & Dimensional Inspection at final & prepare inspection reports and offer to TPI/ Clients.

Witnessed of Hydro Testing of Pipes.

Material planning for NDT department.

Prepare Daily Inspection Reports and Daily Progress Reports of the all QA/QC-NDT activity.

Reviewed & witness the all QA/QC-NDT documents to TPI/Client.

Up keeping Calibration records of all Instruments which are being used for Testing & Welding.

Check the fit-up of joint proper alignment as per drawing.

Coordination with Clients/TPI and HOD for daily activities for Quality of Products.

COMPANY PROFILE:-

International Certification Services (ICS)Pvt. Ltd. is established as an independent Certification and Inspection body with its main objective to safeguard life, property and environment through quality assurance and total quality management. ICS has been providing their value added certification and inspection services to the Government, Public and Private Sector Organizations involved in Land, Offshore, Marine activities. It is a professional organization backed by Devoted, Highly Qualified and Experienced personnel. We provide a wide spectrum of customer oriented Certification and Inspection services in an efficient and cost effective manner. National Accreditation Board for Certification Bodies (NABCB) for Quality Management System for specific sector & Environmental Management System for Chemical products & Fibers, Rubber & Plastic products. ICS well established Quality Assurance System and has been accredited by JAS-ANZ, the Joint Accreditation System of Australia and New Zealand, Australia for Quality and Environmental Management Systems.

JOB PROFILE:-

PIPE LINE PROJECTS (CGD & Cross Country):-

M/s. Mahanagar Gas Ltd. – Mumbai (joint venture of British Gas, GAIL and Govt. of Maharashtra) and . M/s. Maharashtra Natural Gas Ltd. – Pune (Maharashtra).

Inspection of Trail pit, Trenching, Welding, Coating, Lowering, Back filling and Root marker for pipeline.

Verification of Backfilling Reports & approval of as laid drawing.

Witness of Non Destructive Testing (NDT) like Visual Inspection, Radiography Testing film review, Ultrasonic Testing witness, Dye Penetrate Testing etc.

Witness of Hydro Testing and Pneumatic Testing of Pipes and Pipelines.

FEBRICATIONS:-

M/s. Goal Offshore Ltd. Navi Mumbai, M/s. Pratibha Ind. Ltd., Thane.

Plan and perform inspection/verification activities at Vendor/Supplier location to meet contractual obligation.

Review Material Test Certificates (MTCs) and carry out material identification as per requirement.

Witness / Review Welding Procedure Specification (WPS), tube to tube sheet mock-up and welders qualification test.

Verify procedure and personnel employed for carrying out NDT / other tests are qualified.

Check correct weld procedure employed, Inspect weld profile preparation, joint fit-up, filler metals and consumable materials, welding performance parameters observed.

Perform visual examination upon completion of welding, Monitor pre and post weld heat treatment, where specified.

Visual and dimensional check of Welding, Pipes, Plates, Beams, Column, Heat Exchangers, Boilers and Pressure Vessel.

Witness Hydrostatic testing/ Pneumatic testing / Leak testing of pipe and Storage Tank as per procedure.

Witness of Destructive Testing (DT) like UTS, Root Bend, Face Bend, Side Bend, Nick break, V notch impact test, Micro itching, Hardness test etc.

Witness / Review NDT (Non Destructive Test – UT, RT, MT, PT & VT).

Knowledge of Welding like SMAW, SAW, TIG, MIG, FCAW & ERW.

Witness of Welder Qualification Test (WQT) and Electrode Qualification (EQT).

Review and interpretation of Radiography Film.

Review of Procedure, Procedure Qualification Records (PQR), Welding Procedure Specifications etc.

Ensure the relevant quality control inspections and tests (NDT Tasks) are planned and executed and appropriately recorded.

Installation, testing and commissioning of various component of domestic gas connection like meter control valve, pressure regulator, gas consumption meter, copper tube, appliance valve etc.

Read engineering work orders and review inspection procedures, drawings and specifications to determine inspection requirements.

Responsible for product & process qualification, NCR handling & root cause analysis.

To check and review calibration certificates for various equipments which are used in testing and Inspection.

Preparation of Daily Progress Reports (DPR) and Monthly Inspection Reports.

Ensure the timely completion of all inspection activities as per Purchase Order/project requirement.

Conduct tool box meeting for the Welders, Fabricators and Quality Department to ensure the product Quality & Safety.

VENDOR INSPECTION:-

Bare Pipes and 3 LPE Coated pipes inspected for M/s. Gujarat Gas Company Limited (GGCL) and

Gujarat Gas Limited (GCL) at M/s Bhushan Steel Ltd. (BSL) Khopoli (Maharashtra).

Witness of Hydro Testing, Manual and Auto Ultrasonic Testing, Magnetic Practical Testing UTS, Root Bend, Face Bend, Side Bend, Nick break, V notch impact test, Micro itching, Hardness test etc. for line pipes.

HPCL RVI Inspection at vendor premises: Material identification and inspection, visual and dimensional inspection as per approved Checklist/drawing and technical specification

Raw material & online inspection of Steel pipes, Copper tubes, GI and PE pipes & fittings at JISL, DURA LINE, KIMPLAS & GLYNWED for MNGL, GGCL, IGL etc.

Third party inspection as per QAP, PO and relevant standard for Pipes, Fittings, valves, fire extinguisher etc. for GGCL SGL and IGL.

IGL materials like Copper tubes, inspection at Rajco Metals Pvt. Ltd. and Corrugated Flexible Metal Hose pipes (Anaconda) inspection at Chandan Enterprises.

Witnessed Eddy Current Testing of Copper Tubes.

RETAIL OUTLET AUDIT OF BPCL, IOCL & RELIANCE

Coordination of Reliance RO Audit project from RCP Ghansoli.

Inspection for Quality, Quantity, House Keeping, Customer Services, Automation system.

Training attended at BPCL Wadala (Mumbai) depot for BPCL RO audit.

Preparation of Daily and Monthly Inspection Reports.

(Clients: - Mahanagar Gas Ltd., Maharashtra Natural Gas Ltd., BPCL, HPCL, GGCL, IGL, ONGC, JISL, Rajco Metals Pvt. Ltd., Chandan Enterprises, Green Globe Fuel Solution etc.)

Pratibha Industries Ltd. Group is well-known and well fame among pipe and steel industries. It is an ISO 9001:2000 certified company and manufacturing large diameter 16” O.D. to 100” steel pipes (HSAW and LSAW) use for Petrochemicals, Refinery & Power Plant and Transportation of Water, Oil, Gas etc. It is India’s largest industries house. They have coating plant with facility of inside and outside 3 LPE coating of pipes. In addition to pipes the plant also manufactures custom built structural steel products for onshore and offshore applications.

DESIGNATION:-Engineer (NDT)

JOB PROFILE:-

Operating, setting & probe arrangement for IIX mode of Auto Ultrasonic Testing (AUT/Pipe UT) machine for calibration & inspection with NDT Tech. & RD Tech. make CANADA.

Preparation of the calibration drawing & calibration block on the basis of various standards.

Manual Ultrasonic Testing and Thickness measurement of Plates, Pipes, and TKY joints, Boilers, Pressure Vessels & Storage Tanks.

Up keeping Calibration records of all Instruments which are being used for Testing & Welding.

Visual & Dimensional Inspection of incoming Raw Materials, Final products, Pipe Fit-up & Welding of Shafts, Beams, Columns, Plates, Pipes & Pipelines, Boilers, Pressure Vessels, Storage Tanks, Final products etc. according to approved Drawing and Quality Assurance Plane (QAP) and Procedures.

Witnessing of Welder Qualification Test according to approved Welding procedures Specification.

Witnessed of Hydro Testing of Pipes.

Check the fit-up of joint proper alignment as per drawing.

Welding inspection Before, During & After, as per welding parameters according to approved WPS and PQR.

(Clients: - GAIL, Delhi Jal Board, L & T MHI Boilers Ltd., Saipem (I) Ltd. BMC etc.)

Welspun Corp. Ltd. (www.welspuncorp.com)Welspun Group is a USD $3 billion dollar group with diverse business interests that range from SAW pipe manufacturing to tubular products and textiles. Welspun corp. Ltd. has one of the largest capacities of manufacturing SAW (L-SAW and H-SAW) and ERW pipes with capability to produce inch to 100 inch pipes for all applications and therefore provides a one spot shop, for all pipe solutions. WELSPUN has to its credit, completed many prestigious projects, the latest being supply of pipes for the laying of the World’s deepest pipeline in the Gulf of Mexico, USA. Anjar pipe Complex is accredited with all QMS (ISO-9001:2000), API & HSE (ISO-14001& OHSAS-18001) Management Certification Systems.

The raw materials/ coils used for these are basically Mild Steel. It is equipped with latest OFFLINE welding mill with PLC, and Laser tracking system. The job consist inspection of Plate and Pipe Weld seam & helical Weld seam by Ultrasonic testing making reports and its analysis with graphical data.

DESIGNATION:-Quality Control Inspector (NDT)

JOB PROFILE:-

Radiography Film Interpretation Under various inspection EIL, GLIS, SGS, TUV, BVIS, &VELOCY.

Operating & setting Auto Ultrasonic Testing machine for calibration & inspection with NDT.Tech.

Worked in ERW (Electric Resistance Welding - HFW) plants With Scan Master make Israel.

Material planning for NDT department.

Prepare Daily Inspection Reports and Daily Progress Reports of the all QA/QC-NDT activity.

Reviewed & witness the all QA/QC-NDT documents to TPI/Client.

Up keeping Calibration records of all Instruments which are being used for Testing & Welding.

Check the fit-up of joint proper alignment as per drawing.

Coordination with Clients/TPI and HOD for daily activities for Quality of Products.

(Clients: - IOCL, GAIL, L& T Ltd., ANADARCO USA etc.)

PSL Ltd. group is well-known as “God Father of Spiral Saw Pipes” and well fame among pipe and steel industries. It is an ISO 9001:2000 certified company and manufacturing large diameter steel pipes (SAW and Ductile Iron pipes) for transportation of Water, Oil, Gas etc. It is India’s largest industries house. They also have coating plant with facility of inside and outside coating of pipes. Our SPIRAL PLANT has manufacturing range from 16” O.D. to 86” O.D length from 6 to 12.7meters, low carbon SAW welded. Annual production capacity is approx. 250,000 Metric Ton. The raw materials/ coils used for these are basically Mild Steel. It is equipped with latest OFFLINE welding mill with PLC, and Laser tracking system. The job consist inspection of Plate and Pipe Weld seam & helical Weld seam by Ultrasonic testing making reports and its analysis with graphical data.

DESIGNATION:-Quality Control Inspector (NDT)

JOB PROFILE:-

Carried out Penetrate Testing in shop with Interpretation & Evaluation of defects.

Testing Pipe Weld seam & Bevel by Magnetic Particle Testing for interpretation of various types of defects by Coil,Yoke & Prod Technique with Florescent and Non Florescent (Visible) method.

Preparing all types of NDT procedures, Reports and DPR (Daily Progress Report).

(Clients: - IOCL, GAIL, BHEL etc.)

ADDITIONAL WORK:-

Hand on experience of measuring instruments like PI tape, Micrometer, Vernier Caliper, Welding Gauge etc.

Minimize operation coast and maximize the productivity.

Maintaining Safety environment in plant & at site and Safety Promotional activity.

Manage Manpower and shift.

Good communication with seniors & juniors.

Ability to take complicated technical issues.

Energetic and dynamic with good attitude.

COMPUTER PROFICIENCY:-

Microsoft word, Microsoft excels, Power Point, Internet Surfing, ERP & SAP.

PERSONAL PROFILE:-

Name : - Umesh Kumar Trivedi

Father’s Name : - Shree Himmatramji Trivedi

Date of Birth : - November 05th 1982

Nationality : - Indian

Languages Known :- Hindi, English, Marathi, Guajarati & Rajasthan.

Marital Status : - Married

Religion : - Hindu

Passport Details : - No.- J6762807, Issue from – Jaipur, Date of Issue – 01/06/2011, Date of expiry – 31/05/2021

Permanent Address :-At-post –Paloda, Tal. - Garhi. Dist-Banswara, (Rajasthan) Pin -327605

I hereby declare that all the above information is true to the best of my personal knowledge.

Place: Mumbai Dated: / /2018 (Umesh Kumar Trivedi)

(Plant tree, save tree and save Life.)



Contact this candidate