Resume

Sign in

Commissioning Engineer, Senior Production Technician, Panel Operator

Location:
Al Jubail, Eastern Province, Saudi Arabia
Salary:
US $ 2500
Posted:
May 16, 2018

Contact this candidate

Hilario T. Ramirez

B-* L-**, Jeanette Gardens *, Naga road

Pulang Lupa Uno, Las Piñas City, Metro Manila, Philippines

+632******* / +966********* ac5g6l@r.postjobfree.com

WORK EXPERIENCE:

Senior Multicraft (Production) Technician

Dow Chemical Company / Juffali Bros. JV

Arabian Chemical Co. (Latex) Ltd. – Jubail City, KSA Aug. 2016 – Present

Duties and Responsibilities:

Keeps the processing plant running safely and continuously based on Dow Chemical Company standards.

Works as a Field / Panel Operator on a daily basis rotation with the other operators; controls the process operations locally and through a computer based control system (Dynamic Dowtran) then upgraded to new ABB System 800xA.

Performs sampling analysis of the finished product and takes samples of raw materials deliveries.

Responsible for start-up and shutdown of main process units and utilities as per instructions from Supervisor.

Monitors raw materials/product storage's capabilities in shift and coordinating to Material Management personnel.

Offloads raw materials and loading of product.

Operates the plant in safe condition and take emergency action.

Shutdown, isolate and prepare process units or production equipment for maintenance.

Participates in safety and other training sessions according to the plan.

Coordinates to the maintenance personnel if there are some malfunctions on the equipment to avoid work stoppage.

Properly employs all SOPs, Work Instructions, Training Guides, and

forms in the performance of tasks.

Mechanical Commissioning Engineer

Coal-Fired Thermal Power Plant Project (3X150MW)

SK Engineering & Construction

Tufanbeyli, Turkey Feb. 19, 2015 – Oct. 18, 2015

Duties and Responsibilities:

Performs walk downs and punch list checking/verification for the equipment and the systems.

Updates and mark-ups P&IDs to identify the work completed.

Monitors and witness some piping for air blowing, steam purging, lube oil and water flushing activities.

Involves in Pre-comm. / Commissioning and Start-up of BOP`s(balance of plant), auxiliaries and equipment. Boiler feed water pump system, Primary/Secondary air fans and air dampers system, Soot blower system, Selective non-catalytic reduction system, Coal and Limestone feeder system, Bed ash coolers system, Closed cooling water system.

Coordinates and assists the Vendor representative in commissioning of the equipment.

Performs initial test run of rotary and static equipment after verification of all necessary pre-comm./commissioning checklists have been done.

Submits progress report to Deputy Mechanical Commissioning Manager.

Prepares equipment monitoring checklist.

Self-Employed

Manila, Philippines March 12, 2012 – Feb. 18, 2015

Central Control Room Operator

Oil & Gas Production Platform Offshore

Maersk Oil / Team Energy – Qatar Feb. 10, 2009 – March 07, 2012

Duties and Responsibilities:

Carry out the safe and efficient operation of oil and gas production process and utility systems by monitoring and controlling wells, process plants, utility equipment and pipeline via DCS / SCADA control systems (ABB & Siemens), to ensure production and environmental targets are met.

Maintain safeguarding systems (F&G, ESD) at maximum functionality by

control of inhibits and overrides and equipment out of service.

Monitors and control operational performance of well-head platforms,

satellites, water injection, gas treatment and power generation plant.

Check the operation of the well-head platforms and the flowing/injection

status frequently through OS displays.

Constantly monitor levels of production and perform well tests as per

well test interface schedule and also adjust the water injection well if out

of the limits.

Monitors the major equipment (like gas compressors, air compressors, HP pumps, turbine generators, etc.), and in case the sequence is aborted, identify the reason and inform the Production supervisor to take corrective action.

Monitors and control remotely all plant equipments such as production

separators, pumps, compressors, filters, deaerators, turbines, etc., to

ensure operational objectives are achieved.

Analyze production data and process behaviors and take action to rectify

abnormal conditions.

Gathers data and assist in preparation of production reports.

Prepares detailed and accurate shift activity log and ensure shift handover comprehensive and accurate.

Manage chemical stocks and chemical injections optimization.

Monitors and report on platform status for duration of any emergency.

Monitors and direct plant operators to ensure production routine tasks are completed on time.

Participates in the companies training & competency assessment program.

Interprets laboratory analysis results and take action to ensure specifications met.

Understands and uses P&ID and C&E drawings.

Safely and accurately carry out tasks as given by the production supervisor/assistant.

Senior Commissioning Operator

Yemen LNG Project

Yemgas / KBR – Balhaf, Yemen April 17, 2008 – Dec. 22, 2008

Duties and Responsibilities:

Performs pre-commissioning, commissioning & start-up, and safe operation of the utilities system of the Yemen LNG complex.

Updates and mark-ups P&IDs to identify the work completed.

Coordinates to client area representatives/operators..

Monitors air/rupture blowing and lube oil/water flushing of lines after hydrotest or pneumatic test of the systems and subsystems by the subcontractor.

Performs punch list checking for the equipment and the systems.

Prepares daily record data sheets of various units to monitor any abnormalities.

Verification/witnessing of pre-commissioning and commissioning

activities in the field.

Performs weekly test-run of the temporary seawater intake pumps.

Submits progress report to Commissioning Supervisor.

Monitors/Assists in commissioning the utilities equipments such as, GTG`s, EDG`s, N2 Generation Units, Air Compressors, Chillers, Desalination Units, Boilers and Firewater System.

Member of the ICAPS outstanding punch lists clearing/verification team. Authorized to updates and inputs all verified punch list items related to piping, vessels and utilities that were completed to ICAPS dossiers.

Ensures the HSE requirements/procedures as defined by the commissioning are adhered to.

Senior Multicraft (Production) Technician

Dow Chemical Company / Juffali Bros. JV

Arabian Chemical Co. (Latex) Ltd. – Jubail City, KSA Oct. 1994 – Jan. 5, 2008

Duties and Responsibilities:

Keeps the processing plant running safely and continuously based on the Dow Chemical Company standards.

Works as a Field / Panel Operator on a daily basis rotation with the other operators; controls the process operations locally and through a computer based control system (Dynamic Dowtran).

Performs sampling analysis of the finished product and takes samples of raw materials deliveries.

Responsible for start-up and shutdown of main process units and utilities as per instructions from Coaches / Supervisors.

Participates in the maintenance and other jobs according to the pre given instructions.

Monitors raw materials/product storage's capabilities in shift and coordinating to Material Management personnel.

Offloads raw materials and loading of product.

Operates the plant in safe condition and take emergency action.

Issues “safe work” permits for both ACCL and non-ACCL personnel who will be working on site.

Contributes new ideas through e-tools; such as quality, safety and process for plant improvement.

Trains new Multicraft Technicians.

Participates in pre-commissioning/commissioning and start-up activities.

Shutdown, isolate and prepare process units or production equipment for maintenance.

Participates in safety and other training sessions according to the plan.

Maintains good housekeeping of the plant area.

Coordinates to the maintenance personnel if there are some malfunctions on the equipment to avoid work stoppage.

Properly employs all SOPs, Work Instructions, Training Guides, and

Forms in the performance of tasks.

Maintenance Supervisor

Colortex Processing Inc. – Bulacan, Philippines Feb. 1992 – Aug. 1994

Duties and Responsibilities:

Supervises the installation/erection of machines such as boilers, dyeing / Finishing machines and also pipelines installation.

Prepares maintenance activities for the subordinates. Schedules and coordinates their work as well.

Prepares weekly work schedule for the Maintenance Engineers, Technicians and Boiler operators.

Creates procedures and coordinates with other departments if there are preventive/corrective maintenance works over the weekend to avoid any delays in the production.

Supervises the corrective and preventive maintenance activities including the standby Power Generator 550Kva.

Orders any materials/parts required for the maintenance once a month.

Prepares preventive maintenance and lubrication schedules of all machines.

May provide solutions to various work problems and may recommend work measure to increase productivity.

Makes monthly inventory of spare parts, and also in-charge in purchasing of the needed materials.

Orients and provides training to new workers and ensures that all of them are aware about the company procedures.

Assists in troubleshooting any defective electrical/mechanical equipment.

May hires personnel in case of emergency. Evaluates subordinates for their promotion.

Implements approved plant changes and modifications as per the requirement.

Supervises the maintenance works by contractor.

Ensures that standards for safe working conditions are being adhered to.

Quality Control Inspector

Phil. Fishing Gear Ind. Inc. – Valenzuela City, Phils. July 1990 – Feb. 1992

Duties and Responsibilities:

Assists the Foremen and Supervisors in implementing the adjustment of the required sizes of any ordered fishing nets.

Monitors the production process to keep good quality of the product.

Performs the final inspection of the finished products before it will be delivered.

Submits progress report for the daily operation to the Quality Control Chief.

Finishing Supervisor

Oversea Warp Knitting Inc. – Valenzuela City, Phils. Jan. 1990 – June 1990

Duties and Responsibilities:

Supervises the day-to-day operation in the production.

Prepares daily work schedule for the production personnel.

Coordinates to the production chemists in inspection of the product if any adjustment is to be made as per customer requirement.

Supervises for raw material and product inventory.

Maintenance Mechanic

Oversea Warp Knitting Inc. – Valenzuela City, Phils. Nov. 1988 – Jan. 1990

Duties and Responsibilities:

Performs daily routine inspection of all machines.

Prepares preventive maintenance and lubrication schedules of all machines.

Carries out corrective and preventive maintenance on equipment to allow for smooth and efficient operation.

Fabricates some needed tools and modify the equipment ancillary as per requirement.

EDUCATION:

B.S. Mechanical Engineering

Technological Institute of the Philippines (Manila) 1981-1987

PROFESSIONAL LICENSES:

Mechanical Engineer - 1987

Career Service Professional - 1987

TRAININGS AND SEMINARS:

A. Basic First Aid

QISC (Qatar International Safety Centre)

Doha, Qatar

January 24, 2012

B. OERTM (Offshore Emergency Response Team Member) – Further Training

Consolidated Training System Inc. (CTSI)

Tanza, Cavite, Philippines

Feb. 18, 2011 – Feb. 19, 2011

C. EX Hazardous Environments Appreciation

Petrolec

Mercure Hotel, Doha, Qatar

November 21, 2010

D. Process Safety 101

Prime Health Group

Mercure Hotel, Doha, Qatar

Nov. 18, 2010 – Nov. 20, 2010

E. OERTM (Offshore Emergency Response Team Member)

QISC (Qatar International Safety Centre)

Doha, Qatar

March 28, 2009 - April 1, 2009

F. Siemens Operator Training

Siemens Company

Ramada Hotel, Doha, Qatar

Feb. 17, 2009 - Feb. 20, 2009

G. H2S-Hydrogen Sulfide / BA-Breathing Apparatus Training

Enertech Aviation & Maritime Academy

Doha, Qatar

February 12, 2009

H. T- BOSIET (Tropical-Basic Offshore Safety Induction Emergency Training)

Enertech Aviation & Maritime Academy

Doha, Qatar

Feb. 10, 2009 – Feb. 11, 2009

I. Computer-Aided Construction Project Management

Cadvision Engineering Technologies

1955 C.M. Recto, Manila, Philippines

March 10, 2008 – March 14, 2008

PERSONAL DATA:

Passport no.: EC7344419

Passport Expiration Date: April 07, 2021

Civil Status: Married

Skype ID: kyle_0910

Height: 178 cm.

Weight: 87 kg



Contact this candidate