Designer Plant

Michael D. Lawson

Overview

I have ** years of experience in the refining & power industry. This experience has proved invaluable in project planning, organization and execution of projects. I have over 18 years of experience in refining in a supervisory position in Structural/Civil projects field and home office. Other duties include staff recruitment, interviews, and performance assessments. I have experienced in FEL estimates, estimating manpower schedules, preliminary field routing for estimates, Civil/Structural layout, civil layout, foundation, structural steel, architectural design. This experience has enhanced my efforts for assuring quality and accuracy on the project.

Work Experience

Benham Engineering (Haskel) 2017

Benham Engineering

Tulsa OK– Lead Civil/Structural Designer

Responsible for the development of Construction deliverables. Responsible for development of, design layout, 3D modeling, and field questions and the supervision of the staff located in the home and field offices

Staffing Technical Services (STSI) 2016

Contracted to C & I Engineering

Louisville KY– Lead Civil/Structural Designer

Responsible for the development of Construction deliverables. Responsibility is to update the existing units to support the upgrades, which involves New Pipe lines, Pipe racks, Structures, cable tray support and foundations.

Richard Design Services 2014 ~2016

Flint Hills Refinery (Koch Industry)

St Paul MN

Position: Lead Civil/Structural Designer

Responsible for the development of the Phase 3 & 4 Estimates, Construction deliverables and the supervision of the staff. Responsible is to update the existing units to support the upgrades to the plant, which involves additional equipment and routing of new lines, Pipe racks, foundation and cable tray support to and from existing

URS - 2006 ~ 2014

Position :Structural Designer Supervisor

Projects:

Ameren Power Company

Lead Structural Designer - Responsible for development of construction deliverables, design layout, 3D modeling, and field questions and the supervision of the staff located in the home and field offices. This is a wet scrubber FGD consisting of inlet duct work for the units 1 & 2 with duct support steel, two large concrete absorbers with Pump house between to accommodate the absorbers, new Chimney, large electrical building, limestone silo’s and dewatering building.

Dayton Power & Light

Lead Structural Designer

Responsible for development of construction deliverables, design layout, 3D modeling, and field questions and the supervision of the staff located in the home office.

Indiana Power & Light

Lead Structural Designer

Responsible for development of construction deliverables, design layout, 3D modeling, and field questions. Limestone receiving hopper facility, Conveyor foundations, Foundation for Gypsum storage slab

Burns & McDonnell 2001 ~ 2006

Projects:

Ponca City OK. Refinery – Lead Civil/Structural Designer

Responsible for the development of theFEL2 & FEL3 Estimates, Construction deliverables and the supervision of the staff located in the home and field office. These projects consist of Reducing the amount of sulfur in Gasoline and Diesel to 10 part per million by the EPA by 2006 & 2008. We also had to update the capacity of the existing units to support the upgrades to the plant, which involves additional equipment and routing of new lines and cable tray to and from existing units within the plant including tank farm areas.

Conoco/Phillips

Lake CharlesLA.Refinery – Lead Civil/Structural Designer

Responsible for the development of theFEL2 & FEL3 Estimates, Construction deliverables and the supervision of the staff located in the home and field office. These projects consist of Reducing the amount of sulfur in Gasoline and Diesel to 10 part per million by the EPA by 2006 & 2008. We also had to update the capacity of the existing units to support the upgrades to the plant, which involves additional equipment and routing of new lines and cable tray to and from existing units within the plant including tank farm areas.

Conoco/Phillips

BorgerTX. Refinery – Lead Civil/Structural Designer

Responsible for the development of theFEL2 & FEL3 Estimates, Construction deliverables and the supervision of the staff located in the home and field office. These projects consist of Reducing the amount of sulfur in Gasoline and Diesel to 10 part per million by the EPA by 2006 & 2008. We also update the capacity of the existing units to support the upgrades to the plant, which involves additional equipment and routing of new lines and cable tray to and from existing units within the plant including tank farm areas.

Black & Veatch (Oil and Gas Division) 1990~ 2001

Lead Civil/Structural Designer

Responsible for the development of theFEL2 & FEL3 Estimates, Construction deliverables and the supervision of the staff located in the home and field office. These projects consist of new unit including structures and large concrete foundations. We also update the capacity of the existing units to support the upgrades to the plant, which involves additional equipment and routing of new lines and cable tray to and from existing units within the plant including tank farm areas.

Butler Manufacturing 1984~ 1990

Lead/Checker - Civil/Structural Designer

Responsible for the development of food DC and warehouses covering 23 acres. Responsible for all deliverables for fabrication and foundations for construction.

Columbian Steel Tanks 1981~ 1984

Structural Designer

Deliverable of AWWA & API tanks for oil storage and also Water Storage.

Mountain States Mineral Enterprises –1979 thru April 1981

Structural designer for ball mill & crusher plants

Lutz Daily & Brain 1977~ 1979

Structural Designer

Structural drafter on Power Plants.

Specialized Training

OSHA Safety

Fall Protection

Confine Space

H2S

Chronology

Staffing Technical Services (STSI)

P.O. Box 781 Wheaton IL 60187 – May 2016 to August 2016

Richard Design Services (RDS)Flint Hill Resources (Pine Bend Refinery) Minnesota – July 7th, 2014 to Present

URS/Advatech 8300 College, Suite 200 Overland Park Ks 66210 – April 17, 2006 thru July 7th, 2014

Burns & McDonnell 8400 Ward Park Way KCMO, 64114 – Aug 20, 2001 thru April 17, 2006 Lead Structural/Civil Designer – ConocoPhillips Low Sulfur Diesel/gasoline Projects, 3 major projects (Ponca City, Lake Charles La, Borger TX)

Black & Veatch Pritchard Overland Park Ks 66210 – March 1989 thru Aug 20, 2001 – Lead/Checker for many Process plants (Refinery’s & Chemical Plants) which include De-sulfuration plants, Hydrogen plants, water treatment plant, FGD units.

Butler Manufacturing KCMO – Feb 20 1984 thru March 1989 - Lead Structural Designer for 1.2 million sq. ft. warehouse for Wal-Mart

Columbian Steel Tanks April 1981 thru Feb 1984 – Structural Designer AWWA, API bolted steel tanks

Mountain States Mineral Enterprises – Tucson Az Oct 1979 thru April 1981– Structural designer for ball mill & crusher plants

Lutz, Daily & Brian – Structural Designer – Oct 1977 to Oct 1979 Coal Powered Power Plants

Areas of Expertise

Civil/Structural Deliverables

Structural Steel Detailing

Concrete Detailing

Reinforcing Steel Detailing

Project Planning

FEL Estimates

Man Power Schedules/Estimates

FEL2/FEL3 Estimates

Auto Cad Software 2012/13/14 & 15

Micro Station Software

PDS Framework 3D Modeling

Cad Worx Plant 3D Modeling

NavisWorks

Proficient with Microsoft Word and Excel and Bluebeam

Years of Experience

40 Years of Design

25 + years of Field Experience

Education

Platte College St. Joseph, Mo

Graduated Oct, 1977

Excelsior Spring High School

Graduated May, 1975

Contact Information

14191 195st

Pattonsburg, Missouri 64670

Cell Phone 816-***-****

Home E-mail: ****************@***.***

Contact this candidate