Resume

Sign in

Electrical Project

Location:
Belgaum, KA, India
Posted:
March 11, 2018

Contact this candidate

Resume:

RAMLING HULJI

E-Mail ac4rso@r.postjobfree.com

Mobile phone +971-********* +919*********)

Nationality INDIAN

Date of Birth 20/07/1968

CAREER PROFILE

Worked as Lead/Sr. Electrical & Instrumentation designer/Engineer having (over 25 years) Good experience and competency using AutoCAD / Microstation as well as Experience in 3D design exposure to onshore / Offshore projects

experience Electrical/Instrumentation and Telecom drafting for Oil & Gas Industry, industrial process plant types of projets. Design Detailed Engineering & drafting contraction and commissioning support various projects including Oil & Gas, Petrochemical plant, Power plant, utilities and automation projects. including Refinery, Petrochemical, and Gas Processing Onshore-Offshore Oil & Gas Production Platforms & field, Jack-up Drilling Rigs. Engineering, Procurements & Construction (EPC & EMC) company. Review/approve commissioning procedures Monitor commissioning activities. Experience of ESD & F&G cause and effect testing, oil & gas processing equipment and plants.

Knowledge and exposure to various international code and standards- Conversant with relevant design code and standards related to the Oil & Gas Industry such as ISA, IEC, SHELL DEP, TOTAL GS, BS etc.

Ability to co-ordination with various discipline like Electrical, Process, Mechanical and Piping for implementing the exact design requirements for Instrument control System Telecommunication interfaces.

Participation in FAT. Involved in different size of projects having up to 15000 I/O points. independent Design & drafting, preparation of C & E Chart, hook up diagram, ESD & F & G Block Logic diagram, F & G Layout, single line diagram etc.

Exposure to other specialized area like, HIPPS, Metering System, wellhead control panel, pneumatic to electronic system conversion F & G System upgrading etc.

PRESENT EXPERIENCE

TOTAL ABK ( APRIL 2014 – NOV 2017)

Designer E & I

Job Responsabilités : Worked as part of TABK PMC TEAM.

Prepare detailed construction Electrical & Instrumentation drawings.

prepare commissioning pre commissioning test sheet.

Actively participated for installation, contraction and commissioning in various project..

Receive basic concept and brief scope of the project from the Project Engineer or RFM.

Site surveys to collect data for preparing detail engineering. verify the spare terminals and check cable entries to the cabin for new cables, cable try space new routing, check spare breaker for power

Detail Design/ drafting & checking of Termination Diagrams, Loop Diagrams and Instrument Layouts, Cable routing diagram, Hook up Diagram, MTO, P & ID, ESD Block diagram, cable schedule etc Preparation of I Instrument Specifications and data sheets Instrument index, cable block diagram, Loop diagram, hook up diagram, fibber optical connection diagram. Mod bus cable termination diagram, marshalling terminal interconnection diagram, ESD logic block diagram, Cause and Effects, control wiring diagram, cable tray / cable routing layouts, Equipment layout, Switch Room Layout, Lighting Layout etc.

Review of Vendor Documents to bring them to the company standards and specifications.

Develops all technical aspects for new / revamped projects for inclusion in preparations of technical scope of work.

Site survey to establish status of existing facilities and new installations.

Carries out data gathering and operations review to establish scope of design and prepares the basic engineering documents.

Experience in generating control panel layout/detail drawings.

Experience in generating interconnection and control system architecture drawing.

Prepare Electrical & Instrumentation material take off in accordance with Company specification.

Carry out electrical design calculations such as Cable Sizing Calculation, Voltage Drop Calculation

Follow up with DO/L Musafah Base for material mobilization to offshore for ongoing projects.

Follow up / co-ordination with DOX/FC E&I Foremen offshore.

Participating actively in HSE meetings, safety talks, tool boxes, training sessions and drills

Co-operating actively in the execution of the HSE plans.

Wood Group PSN, India (November 2013 – March 2014)

Sr. Designer (E & I)

Job Responsibilities:

Involved in design / drafting / checking Electrical / Instrument project work package.

& As building of Termination Diagrams, Loop Diagrams and Layouts, P & ID Block diagram, cable schedule etc.

Review of Vendor Documents to bring them to the company standards and specifications

Package follows up

Checking & Update all Electrical Elect/Instrument l Master drawings following “As built Mark ups” from Projects

Receive basic concept and brief scope of the project from the Project Engineer or RFM.

Wood Group CCC Oman (EMC Contractors of PDO Oman)

December 2011 – October 2013

Sr. Designer C & A

Job Responsibilities:

Detail Design/ drafting & checking of Termination Diagrams, Loop Diagrams and Instrument Layouts, Cable routing diagram, Hook up Diagram, MTO, P & ID, ESD Block diagram, cable schedule etc Preparation of I Instrument Specifications and data sheets Instrument index, cable block diagram, Loop diagram, hook up diagram, fibber optical connection diagram. Mod bus cable termination diagram, marshalling terminal interconnection diagram, ESD logic block diagram, Cause and Effects, control wiring diagram, cable tray / cable routing layouts, Equipment layout, Switch Room Layout, Lighting Layout etc.

Preparation of Schedule for Task Completion, Manpower Requirement. Leading the Design Team / Drafting Staff for output for the Entire Project.

Preparation Single line diagrams, Schematic wiring diagrams, Interconnection diagrams,

Preparation of Cable Tray & Cable Trench Layout, Earthing Layout, Lighting Protection Layout Control Room Layout & Tray Routing in Control Room.

Involved in site survey to establish status of existing facilities and new installations,

Design / drafting / checking Electrical & Instrument project work package.

Preparation of Control Room Layout, Instrument Location Plan, System Architecture Diagram

Preparation of System Architecture Diagram, Hook up drawings (Process & Pneumatic)

F&G Detector Layout, support detail drawing, MCT & Junction Box Layouts.

Preparation of Instrument Cable Tray/Trench/Duct Layouts, F&G Detector Layout.

Fortune Controls & Automation Co. LLC (FCA), Dubai U.A.E. December 2009 to November 2011 (Sr. E & I Designer)

Job Responsibilities:

Involved in design & drafting as well as checking Electrical & Instrument project work package.

Preparation of Schedule for Task Completion, Manpower Requirement. Leading the Design Team / Drafting Staff for output for the Entire Project.

Involved in design & checking Electrical / Instrument project work package. Of Rig 1 & Rig 2 (SBM) as well as FM200 Fire Extinguishing System (Total Exploration & Production Yemen) & Inlet 3 phase separator (TOTAL/TECHNIP). Electrical & Instrumentation Design & Drafting work. FAT, Materials take off (MTO) Preparation & Biding job etc.

Dubai Petroleum, Dubai, UAE (Senior E & I Designer) December 2004 to November 2009.

BY Brunel Energy LLC, Dubai, UAE, January 2009 – November 2009 Deputed to - Dubai)

& Maritime Industrial Services Co. Ltd. Inc. (MIS) Sharjah U.A.E. (EPC Contractors)

December 2004 to November 2008.

Job Responsibilities:

Involved in design / drafting / checking Electrical / Instrument construction package & review Vendor design package for Offshore DCS upgrade & various projects. Offshore serve for various projects. Frequently visited offshore for project work.

Prepare detailed construction Electrical & Instrumentation drawings.

Preparation of Schedule for Task Completion, Manpower Requirement.

Detail Design/ drafting & checking of Termination Diagrams, Loop Diagrams and Instrument Layouts, Cable routing diagram, Hook up Diagram, MTO, P & ID, ESD Block diagram, cable schedule etc Preparation of I Instrument Specifications and data sheets Instrument index, cable block diagram, Loop diagram, hook up diagram, fibber optical connection diagram. Mod bus cable termination diagram, marshalling terminal interconnection diagram, ESD logic block diagram, Cause and Effects, control wiring diagram, cable tray / cable routing layouts, Equipment layout, Switch Room Layout, Lighting Layout etc.

Involved in site surveys, site verifications, design / drafting / checking Electrical / Instrument construction package.

Prepare drawings such as Single Line diagram, control wiring diagram, cable tray / cable routing layouts, Equipment layout, Switch Room Layout, Lighting Layout, Cable Schedule Schematic wiring diagrams, Interconnection diagrams, GA & Fabrication diagrams of Control panels, Sub-Station layouts, Equipment’s layouts, Power cables layouts, Cable tray / trench layouts, Earthing layouts, Lighting & Cable schedules, MTO, Construction scope of work etc.

Prepare Electrical & Instrumentation material take off in accordance with Company specification.

Review of Vendor Documents to bring them to the company standards and specifications

Package follow up & Update all E & I Master drawings following “As built Mark ups” from Projects.

Juma Al- Majid Group of Dubai, UAE. (EPC Contractors) May 1999 to April 2004

(Electrical & Instrument control designer)

Job Responsibilities:

Detail Engineering, Design/ drafting work and site mark-up of Electrical and Instrumentation area. Layouts (cable route, Lighting, Earthing), Calculation, Specification, cable schedule, Installation drawings, S.L.D. MCC GA., BOM & MTO.

Review/approve commissioning procedures Monitor commissioning activities .

Supervise contractor performance in terms of progress, HSE and quality

Monitor contractors to adhere to site policies, regulations, HSE rules

Liaise interfaces internally (with other company disciplines) and externally (with operation personnel, vendors, third parties

Review / assess / approve site queries and authorize site modifications in coordination with PMT

Assist commissioning group and operations personnel assigned to the commissioning group at onshore and offshore locations; assist coordination and execution of the commissioning activities at onshore and offshore locations

Assist coordination liaison for all interfaces on site and with all integrity groups to ensure to ensure the project requirements and performance standards are achieved

Review Operational Test Procedures associated with the commissioning of instrument systems

Fire & gas system ICSS commissioning interface safety & controls Interface DCS VESDA system riser ESDV testing

Experience of ESD & F&G cause and effect testing, oil & gas processing equipment and plants

Provide input for the most effective use of vendors and assistance during CMS population

Execute tasks using CMS used on major projects ICAPS, GOC, CCMS ETC and review handover dossiers

Provide input to the development of the detailed plan and planning systems including reporting of progress; ensure that changes implemented during the commissioning activities are approved and documented

Provide assistance and guidance in the preparation of requisitions, technical specifications for materials, equipment and consumable required to perform the commissioning scope of work

Actively participated in design and installation & maintenance of Building management system and HVAC,HT switchgear, LT switchgear, MCC, HT motors, LT motors, Control Panels, Distribution Boards, Lighting Panels & Boxes, Local Push Button Stations, Power Cables ( HT ), Power Cables (LT), Control & Lighting Cables, Lighting Lamps, Fixtures & Accessories, Lighting Poles, Junction Boxes, Cable Trays, Conduits, Cable Glands Earthing Material and accessories., modification, programming, termination, & troubleshooting in BMS (Building management system). Actively participated in the 20 building BMS (Building management system) project.

Engineering language Mumbai, INDIA (The Company was involved Sub contractor for engineering consultants) January 1998 to March 1999 (Electrical Designer)

Job Responsibilities:

Design of Cable/Tray routing, installation drawings, panel design, Etc. Proposal and cost estimate for the design, supply and erection of the control panel and all instrumentation items for the loading arms at JNPT. Preparation of Single line diagrams, Schematic wiring diagrams, Interconnection diagrams Electrical package work with panel inspection & site work.

Akay Organics Pvt. Ltd Mumbai India. January 1995 to December 1997 (Junior Electrical Engineer)

Job Responsibilities:

Worked as a Junior Electrical Engineer for Cellulose plant construction. Follow up with consultant for design work such as technical specifications for various equipment and preliminary layout drawing such as HT/LT power cable tray routing, trench & conduit layout for field equipment Earthing layout, HT/LT sub-station layout.

Chowgule Engineers and Machine Ltd. Shinoli, M.S. INDIA. May 1991 to December 1994 (Electrical Maintenance Supervisor)

Job Responsibilities:

Worked for installation and commissioning of electrical and electronic equipment such as LV/HV SWITCHGEARS, generators, Power transformers, Welding machines CNC machines UPS Voltage regulator etc.

Reviewed various circuit variable speed control AC/DC drives balancing machines

Very good knowledge in radio frequency induction hardening machine Horizontal & Vertical types, jigs boring machine, gear cutting, and Sieving machines

Maintenance of various Electro-Mech. machines control panels of Electrical Electronics in Industrial plants. Renewal of old imported machineries to new one. Handled all types of Analog/ Digital AC/DC drives, Motors, Pneumatic instruments and PLC. Carried out various machine control panels modification, preventive maintenance as well as fault finding, H.T/L.T installations etc. Independent maintins CNC machines (warnings, programming etc.)

RESEARCH AND PROJECTS

AL NASAR BROWNFIELD PROJECT.

PRE-KHUFF AF-11 WELL SURFACE TIE-IN PROJECT

AKK2-EP2642 FIRE & GAS SYSTEM UPGRADE (TOTAL ABK)

AKK3-EP2643 FIRE & GAS SYSTEM UPGRADE (TOTAL ABK)

AKK4-EP2644 FIRE & GAS SYSTEM UPGRADE (TOTAL ABK)

AKK5-EP2642 FIRE & GAS SYSTEM UPGRADE TOTAL ABK)

AKS-EP-2576 FIRE & GAS SYSTEM UPGRADE (TOTAL ABK)

AKFW-EP-2786 FIRE & GAS SYSTEM UPGRADE (TOTAL ABK)

AKE-EC 2550 NASR PROJECT (TOTAL ABK)

AKK5-EP-2700 PRE-KHUFF DRILLING SERVICE AGREEMENT (TOTAL ABK)

GLP AIR Compressor Replacement Project (TOTALABK)

GLP Fire water network revamping (TOTALABK)

LQ1 Squash Court Refurbishment (TOTALABK)

AKW NEW OFFICE MODULE H-0401

MARMUL MAIN LINE PUMPING STATION AS BUILT PROJECT (PDO OMAN)

FM200 FIRE EXTINGUISHING SYSTEM (TOTAL EXPLORATION & PRODUCTION YEMEN)

INLET 3 PHASE SEPATOR (TOTAL EXPLORATION & PRODUCTION YEMEN)

BULK MUD AND CEMENT CONTRL SYSTEM FOR RIG 1 & 2 (SBM)

H2S FIXED GAS DETECTORS FOR FATEH FACILITIES AND SW FATEH FACILITIES PLATFORMS (DP DUBAI)

S.W. FATEH FACILITIES PLATFORMS CONTROL ROOM DAMPERS

INSTLLATION (DP DUBAI)

DCS UPGRADE PROJECT FOR AFP & K2 PLATFORMS (DP DUBAI)

UPS UPGRADE PROJECT FOR AFP & K2 PLATFORMS (DP DUBAI))

HALON PHASE OUT FOR S.W. FATEH FACILITIES PLATFORMS (DP)

DPC-I-28 IMPLEMENTATION PROJECT FOR FATEH 25 NOS. PLATFORMS

TRAIN-‘E’ FUEL GAS SYS UPGRD (DP DUBAI)

CONTROL SYSTEM UPDATE (DP DUBAI)

ULRASONIC GAS LEAK DETECTOR (DP DUBAI)

NDC AL – ITIHAD (CANTILEVER CONVERSION)-MIS

RAS AL KHAIMAH GAS COMMISSION (RAKGAS)-MIS

HFO- HEAY FULE OIL STORAGE & BUNKERING FACILITY – QATAR PETROLEUM / QATAR FULE

AGIP KAZASTAN NORT CASPIAN OPERATING COMPANY

BMS JUM AL MAJID 16 BUILDING PROJECTS. (DUBAI)

MMS PROJECTS (DUBAI)

EDUCATION

Diploma in Electronics & Telecommunication Engineering (DET/CE) passed in July 1991, from Bombay Technical Board, Mumbai M.S.-India.

Professional Qualification:

Diploma in AutoCAD 2000 2D & 3D

Raster Image manipulation etc.

Microstation V8i

PDS

PDMS 12.04 SP04

Smart Plant Instrumentation ( INTools-7.0)

QSHE & Functional Trainings:

Offshore Safety Induction

Safety Training observation Program (STOP)

Offshore & Onshore Permit-to Work ( DPC)

Supervisory Safety Training.

Industrial First Aid

H2s Awareness and Escape

Self Contained Breathing Apparatus (SCBA) and rescue Techniques

Fire fighting skills

RELEVANT SKILLS

Native/Bilingual/Fluent/ Intermediate in English

Native/Bilingual/Fluent/ Intermediate in Hindi

Native/Bilingual/Fluent/ Intermediate in Marathi



Contact this candidate