Resume

Sign in

Mechanical Engineer Project

Location:
Abu Dhabi, Abu Dhabi, United Arab Emirates
Posted:
April 11, 2018

Contact this candidate

Resume:

RESUME

T. SRINIVAS

Email: ac43yn@r.postjobfree.com / ac43yn@r.postjobfree.com / ac43yn@r.postjobfree.com

Contact: +971-**-*******

- . -. -. - . - . - . -. -. -. -. -. - . - . - . - . - . - . - . - . - . - . - . - . - . - . - . - . - . - . - . - . - . - . - . - . - .

Career Objective:

To obtain a challenging position in the field of Engineering, that enables me to learn, improve & upgrade my skills, keeping in focus the company’s objectives & also my career advancement.

Technical Skills:

Software Packages: Carrier HAP (Heat load), Plan Swift, AutoCAD, Microstation-V8, MS-Office, PDS (Plant Design System), Knowledge in Primavera (Project Planner)

Trained: T-BOSIET (Tropical Basic Offshore safety Induction & Emergency Training)

Academic Qualification:

Degree in Mechanical Engineers from RVDU

Diploma in Mechanical Engineering from SBTET, Hyderabad, India with First Division in 1998

Intermediate (10+2) in (Maths, Physics & Chemistry) from Board of Intermediate Education, Hyderabad, India with First Division in 1995

SSC (10th) From Board of SSC, Hyderabad, India with First Division in 1993

Experience: around 17+ years of Experience in PIPING, Building Services & CAD Field

Technical Capabilities:

Having Good experience with MEP and EPC projects like Residential, Commercial and Industrial Plants

Familiar with Oil & Gas HSE policy/procedures (Offshore & onshore).

Client and Site Co-ordination for Technical Clarifications & approvals.

Supervision for Detail Engineering & Drawing office (CAD Team).

Design & Calculations for HVAC and Plumbing.

ESP Calculation for AHU, FCU & Fans.

Pump static head calculation.

Duct design and routing based on Air flow distribution.

Chilled water pipe sizing & routing.

Heat load calculation with Carrier E20 form & HAP. Knowledge in ASHRAE 62.1.

Prepare GA drawings for different services and ISOMETRIC drawings

Preparation of Schedule, Schematic and riser diagrams

Preparation of SLD for Consultant approvals.

Coordinating with Architectural and Structural consultants.

Reports preparation for any discrepancy in inputs like Mech.Design, Architectural or Structural drawings.

Prepare method statement, project schedule, Manpower histogram.

Prepare PCA (Project cost analysis) or Estimate the project as service wise based on BOQ.

Verify / scrutiny the tender documents & rise the queries if any discrepancy.

Forward enquiries for material cost based on specifications. Interact & Introduce new reputed suppliers.

Quantity take-off for each service, maintain project wise tender document files and data bank.

Review quotations technical specification deviations, cost comparisons and exclusions.

Major or Type of Projects involved:

1. Oil & Gas

ADNOC, TAKREER, GASCO, ADMA-OPC, ZADCO and ADGAS etc., Projects - Abu Dhabi for Refurbishment of Technical Bldgs., Control Bldgs., Admin and Substations.

Bapco Bsc, Banagas, MTQ Oil field services W.L.L, Belexco Anodizing plant –phase IV, Bahrain

2. Industrial

BRF Food processing, Kizad, Abu Dhabi

Dates Form, Strata Manufacturing Pjsc, Al Ain

Jabel Ali Down Town Reticulation Cooling Plant-Dubai

Ghana Swro, Desalination Plant-Ghana

Aluminum Bahrain BSC, Bahrain

3. Airports

Abu Dhabi International Airport Gate expansion A-380, Commercial Bldg, etc., AbuDhabi

Al Bateen VIP terminal, Abudhabi

Dubai International Airport-Termainal-3, Dubai

Perth airport, Australia (Offsite project)

4. Hospital

a. Specialty type

SKMC Dialysis center, Tawam Dialysis, Gayathi community, Al Silla Community Hospitals, Abu Dhabi

Mediclinic City Hospital- Dubai

Hollywood Hospital, Australia (Offsite project)

b. Clinic type

Al Towayya, Mushrif, Khalifa City-A, Al Falah Ambulatories, Abu Dhabi

City walk Clinic-Dubai

Health Center at Budaiya, Bahrain

5. Educational

Chinese, Al rawfat, Al Bayya & Al Falah, New Global intl., Amity international schools - Abu Dhabi

Secondary technical school - Al Ain

Bahrain Training Institute, Arab Open university - Bahrain

6. Residential

A.High rise

Plaza view tower(45storey), Corniche Residential Tower (50storey), ENI Shams (30 Storey ), ADCP Apartment Tower, Hotel Apartment towers, Etihad Tower etc. - Abu Dhabi

Duja Tower (50 Storey), Apartment Tower (46 storey), Cresent Hotel, Tecom Twin Towers, Jumeirah Hotel Apartment - Dubai

b. Villas/Palace

Sheikha Sham shah Residential Palace - Abu Dhabi

Bawabat Al Sharq Villas Abu Dhabi,

Akoya Villas, Damac apartments, Motor city uptown - Dubai

Sheikh Hamad Palace, Bahrain

7. Commercial

Al Habtoor Royal Car Show Room, Al Ain,

Central mall, Delma Mall expansion, ADDC Filing Stores, etc.,- Abu Dhabi

ADIB Tower, First Gulf Bank - Abu Dhabi

Centro Hotel, Sharjah International Airport

8. Infrastructure

Jabel Ali Down Town Reticulation Cooling Plant - Dubai

Asry Basin Quay Wall Project, Bahrain

Darling Island level-3, Transport House, 717 Bourke Street, Australia (Offsite project)

9. UAE Govt. Projects

Police Head quarters, Police Training School - Abu Dhabi

Abu Dhabi Accountability Authority, Abu Dhabi

Presidential Guard Command - Abu Dhabi

Responsibilities with Companies:

1.Presently working for Intergulf General Contacting(Emdad) at UAE as Sr. Mechanical Design & Estimation Engineer- from Dec’ 2014 to till date

Work Description: As a Sr. Mechanical Design & Estimation Engineer-Study & understand the scope of work through Spec and tender documents. Site visited onshore & offshore plants and understand the requirements with competency level. Based on scope prepare preliminary heat load calculation and design dwg, float enquiries to suppliers and get quotation for Material. Evaluate the quotation as per scope / specification and prepare Cost comparison and specification deviation. Prepare Project Technical and Commercial submission. Cost Estimation/Budget for the Material & Manpower and negotiate with Supplier to provide competitive offer. Analyze the risks, competition level, prelims and Strategy discussed with Management. Prepare BOQ as per client requirements. Familiar with Oil & Gas HSE policy/procedures (Offshore & onshore). After award of contract supervise the Engineering and Design works. Supervision for Detail Engineering & Drawing office (CAD Team). Co-ordination with Client for approvals and Technical Clarifications. Prepare method statement, project schedule, Manpower histogram. Hire civil defense approved Firefighting subcontractor for firefighting system.

2.Worked for Al Fara'a Group at UAE as Mechanical Engineer-(Design & Estimation) from March’ 2012 to Dec'2014

Work Description: As a Mechanical Engineer-(Design & Estimation)-Study & Understand the scope of work through MEP / EPC spec and tender documents. Site visited onshore & offshore plants, Residential, Commercial and Hospitals. Design & calculate heat load using with CARRIER E20 & HAP. Prepare P&ID, Single line and Isometric drawing for proposal to the Refurbishment or Renovation projects. Prepare pipe spool lengths dwgs for fabrication. Prepare Cost comparison & specification deviation. Conduct meetings with Design, Project, Purchase teams and suppliers for better performance. Prepare enquiries for all the equipments & materials for Cost. Prepare proper qualifications or exclusion list. Materials take off for the all the services through the tender drawings or documents provided by the consultant or contractors and also system designed partially on thumb rule base. Prepare BOQ or BOM and Schedules for all the equipment / material (like Pumps, Ahu, Fcu, Pipe fittings, Valves etc.). Prepare PCA (Project cost analysis) or Estimate the project as service wise based on BOQ and final tender reports using with Estimate Bid master software or Excel.

3.Worked for Airmech W.L.L at Bahrain as Mechanical Engineer from March’ 2009 to March' 2012

Work Description: As a Mechanical Engineer-Study & Understand the scope of work through MEP / EPC spec and tender documents. Site visited Residential, commercial, hospital and plants. Design & calculate heat load using with CARRIER E20 & HAP. Prepare P&ID, Single line and Isometric drawing for proposal to the Refurbishment or Renovation projects. Prepare pipe spool lengths dwgs for fabrication. Prepare Cost comparison & specification deviation. Materials take off for the all the services through the tender drawings or documents provided by the consultant or contractors and also system designed partially on thumb rule base. Prepare BOQ or BOM and Schedules for all the equipment / material (like Pumps, Ahu, Fcu, Pipe fittings, Valves etc.). Prepare PCA (Project cost analysis) or Estimate the project as service wise based on BOQ and final tender reports using with Estimate Bid master software or Excel.

4. Worked for GHD Global Pty. at Dubai as Lead. MEP Designer from Dec’ 2008 to March’ 2009

Work Description: As a Lead MEP Designer, Study & understand the scope of work through spec and tender documents. Prepare Architectural details for Heat load calculation. Prepare GA, P&ID, Single line & Isometric, Schematic and detailed drawings for construction as per Design Engineer instructions. Also plant room detailed drwgs include all equipments like Pumps, Heat exchangers, Chillers, Expansion tank, Cooling tower, Ahus, Fcus and all instruments (valves, strainer, gauges (flow & temp.), unions & different fittings). Materials take off for the all the services as per the drawings and prepare BOQ or BOM and Schedules for all the equipment / material (like Pumps, Ahu, Fcu, Pipe fittings, Valves etc.). Prepare RFI, if any discrepancies in Equipment design, Arch. & structural dwgs and Co-ordinate & interact with other building services departments. And review the sub contractor’s queries.

5. Worked for RamTech at Dubai & Hyderabad as Sr. Engineer MEP from Dec’ 2005 to Dec'2008.

Work Description: As a Sr Engineer MEP, Study & understand the scope of work through spec and tender documents of Outsourcing projects. Conduct Updating or Training classes to the team members as per project requirement. Prepare project Schedules and monitoring the project progress & reports. Prepare RFIs for any discrepancy in equipment design, Arch. and structural. Review all the queries and update to the team members as project wise. Check the GA, P&ID, Single line & Isometric, Schematic, detail and spool length drawings as per scope of work. Also plant room drwgs details include all equipments like Pumps, Heat exchangers, Chillers, Expansion tank, Cooling tower, Ahus, Fcus, Chilled beams and all instruments (valves, strainer, gauges (flow & temp.), unions & different fittings). Prepare BOM and Schedules for all the equipment / material (like Pumps, Ahu, Fcu, Pipe fittings, Valves etc.). Upload the final drawing to the client server.

6. Worked as Group Leader from Nov’2000 to Dec’2005 at IIC Technologies (P)Ltd., -

Hyderabad

Major Projects:

A.P & ID (Piping and Instrumentation Drawings)

Software: AutoCAD R-14

Description: This Project includes Digitization of various Industries Piping Layouts. This includes digitization of various features like pipes having different thickness, convergent, divergent and placing of so many symbols, which represents Diameter of Pipes.

B.NPCIL (Nuclear Power Corporation of India Ltd.,)

Software: AutoCAD R-14

Description: This project deals with digitalization of various mechanical, constructional drawings of Kaiga Atomic Power plant & Rajasthan Atomic Power Plant. This digitalization process involves detail parts of civil, structural, placement of various mechanical machinery and electrical layouts (Cable tray routing, tubing layout).

C.US - TELECOM (VERZON, US)

Software: Micro station V8

Project in Brief: The main concept of Telecom, creating networking from one place to another from CO (Central office)

Type of features included: Protectors, Manholes, Conduits, Cables, Fiber cables, Poles, Terminals, Devices, Air pressure, Pair gains, Cross connectors and Street centerlines

Work Description:

As a Group Leader my role is as mentioned below:

Training, Handling of manpower and work distribution

Check the scrubbed sheets and give proper feed back

Proper check for all kind of features captured in grids

Cell completion through final checklist

7. As Project in-charge from Feb’99 to Nov’2000 at Intensive Air Systems Ltd., - Hyderabad.

Work Description:

As a Project In-Charge, at M/s. Intensive Air systems Ltd., My responsibilities were

Preparing project necessary documents for digitalizing the G.A. drawings

Monitoring and evaluation of in-house completed G.A (General -arrangement) drawings Like Duct route fixing, locating dust collection and ventilation equipments (Bag filters, Cyclone, Centrifugal fan and Filter Boxes etc.).

Getting approval of G.A. (General-Arrangement) Drawings from the Client

Preparation of Bill of Material for the entire Project

Preparation & developing of production drawings for manufacturing of the equipments ducting (Transition piece, bend etc.,) filter plenum, centrifugal fan, Bag filter, Cyclone and Grills etc.

Inspection of the manufactured items like Ducting, Equipments and Centrifugal Fans

Supervision of foundation for equipment at clients works site.

Supervision for the installation of entire system.

Developing all the above mentioned Execution drawings in Auto CAD

Personal Profile

Gender Male

Marital Status Married

Date of Birth 17 June 1977

Nationality Indian

Passport No J4384095

I ensure that all the details furnished above are true to the best of my knowledge and belief.

Date:

Place: (T. SRINIVAS)



Contact this candidate