Resume

Sign in

Project Manager Design

Location:
Pila, CALABARZON, Philippines
Posted:
April 10, 2018

Contact this candidate

Resume:

Engineer Gentile Valter

Index

My Field & Experiences

Pg.

3

Summary

Pg.

4

Personal data

Pg.

5

Work Experience

Pg.

6

Education and Training

Pg.

18

Membership

Pg.

19

Personal Skills

Pg.

20

Technical Skills &Publications

Pg.

21

Partners & University

Pg.

22

Important note

Pg

23

As employee or Partner

As Consultant

Summary, my Field, Education, international driving license, publications

` My Field & Experiences

Sector

Performed Activities

Highways & Bridges

Structural Design,Senior Structural Design, Project Manager,

Construction Manager

Tunnelling & Geotechnical

Structural Design,Senior Structural Design, Project Manager

Waste Water

Planning, Project Manager

Power & Renewables

Planning, Project Manager, Construction Manager

Dams & Hydropower

Planning, Senior Structural Design,,Project Manager

Nuclear Power Plant

Structural design, new European normative codes, Numerical simulation with seismic isolators,

Subway Underground

Structural Design, Project Manager

Conventional Railways

Structural Design,

Contracts, Cost,Planning & Programming

Project Manager, Construction Manager,

Build,High Rise,Residential

Structural Design,Senior Structural Design, Project Manager

Industrial & Commercial

Structural Design,Senior Structural Design, Project Manager

High Speed Rail

Feasibility study,

Terminals & industrial

Structural Design,Senior Structural Design, Project Manager,

Feasibility study,

Prototypes

Prototype Design,

Offshore structures

Senior Structural Design,

SUMMARY

Senior Structural Design:

Over the years I have gained extensive experience in the field of Structural Design, from the Design of multi-story Buildings and skyscraper to Design wooden bridges, steel bridge box, concrete bridges normal or pre-stressed, Structural Design Bridges and viaducts, arch bridges and cable-stayed bridges, railway structures, structural sizing railway bridges to the Design of seismic dampers, Designing skyscrapers furniture, Structural Design gravity and arc Dams with structural executions in all its parts, structural design of offshore structures, Offshore platforms, wind turbines, marine foundations, Subterranean structural Design, Structural design of structures and infrastructures under seismic actions, study and research of new numerical methods in collaboration with MIT Massachusetts Institute of Technology and University Federico II by engineering Department.

Project Manager&Director

Designing multiple projects and applying appropriate project management standards for incorporation in different sectors (infrastructures and residential complexes of luxury buildings such as skyscrapers, hotels ), using software as Primavera 6 or Microsoft office, managing the production or project and construction of the required deliverables, planning and monitoring the project, adopting any delegation and use of project assurance roles within agreed reporting structures, preparing and maintaining project, stage and exception plans as required, managing project risks, including the development of contingency plans, liaison with programme management (if the project is part of a programme) and related projects to ensure that work is neither overlooked nor duplicated, monitoring overall progress and use of resources, initiating corrective action where necessary, applying change control and configuration management processes, reporting through agreed lines on project progress through highlight reports and end-stage assessments, liaison with appointed project assurance representatives to assure the overall direction and integrity of the project, maintaining an awareness of potential interdependencies with other projects and their impact, adopting and applying appropriate technical and quality strategies and standards, identifying and obtaining support and advice required for the management, planning and control of the project,managing project administration,conducting a project evaluation review to assess how well the project was managed, preparing any follow-on action recommendations. Developer of new projects Civil constructions and infrastructures.

Consultant

Engineer Structural Design Any structures and infrastructures, Project Manager engineering construction

Dot. Eng. Gentile Valter

Name

Gentile Valter

Date of Birth

16/04/1972 ITALY

Natioanlity

Italian

Address

Rome, Tiburtina Street ITALY,

London,

Manila,

Studio

Milan Via Campania 42 ITALY,

Tel italy

+3906/21118065 / +393*********

Tel UK

+447*********

Tel PH

+63-915*******

E-mail

ac43lg@r.postjobfree.com / ac43lg@r.postjobfree.com

web

www.accademia.edu

http://www.ingegneriasismicaitaliana.com/it

http://www.anidis.it/

Work Experience

Date

1992/1995

Employer&Location

Mechanical Engineering firm engineer Dino Accilli L’Aquila Italy

Engineer &prof. Dino Accilli (TECHNICAL SURVEYOR A. DE NINO)

sector

Mechanical Engineering

Type of employment

DESIGNER

Main activities and responsibilities

Industrial designs for the construction of the bridges to dump, Industrial designs for the construction of turbines for the production of energy, Industrial designs steams turbines

Industrial designs irrigation system with natural basins, pumps submersible, - Industrial designs vents of maneuver for power plants,

Industrial designs plant distribution drinking water,

Industrial design for the construction of power plants, bulkheads, towers of infinity, vents vent, shock absorbers for alternators, drawing steel tank for hydrocarbons, with varying heights from the minimum 15 meters to 35 m high, projects developed by the company 'Snam SpA.

Date

1995/1996

Employer&Location

Architect Ivo Lavieri Roma Italy

sector

Engineering &architecture

Type of employment

Training Planner

Main activities and responsibilities

Architectural design historic building locality Rome, structural adjustment, finite element analysis in 3d FEM, the palace built of stone appeared countless cracks passers,

Design new shopping center Rome, 10-storey building entirely used for the sale of clothing and jewelry.

Date

1996/2000

Employer&Location

Engineering firm Prof. Franco Braca Rome

(http://www.ingegneriasismicaitaliana.com//)

sector

Engineering &architecture

Type of employment

Planner in a team of over 250 people

Main activities and responsibilities

Design structural bridges prefabricated tipping in large ring road, Roma, l = 4 km

Design: structural buildings industrial steel, cooling towers, h = 150 m

Design: Structural Designs structural verification existing dam to the earthquake Dam to gravity location Argentina /Los Reyunos Dam h =132m,

Design: Structural design Dam to gravity h = 108 m, l = 45 m, location Pescara, Italy

Design: Structural Design bridge Box in steel & concrete, Sulmona AQ, l = 80 m,

Design seismic isolators existing building, courthouse in bologna, in this delicate case is simulated all phases of construction, from the cut of the pillars, use of cylinders and placing insulators, static testing of the same insulators .

Date

2000/2001

Employer&Location

Engineering firm Franco Braga Rome

sector

Structural Engineering

Type of employment

Civil Engineering structural

Responsibilities

(Structural Design)

1)Structural design seismic isolators civil engineering location Padova Italy. Public hospital over 9 floors with a total area of over 1700 square meters to floor .

2)Poggio Hibernate viaduct being constructed on Highway Livorno-Civitavecchia (2500 m. Long).

3)Structural Design of the auditorium of the new Auditorium in Rome;

4)Viaduct Agognate Italy (rail, 1,075 m. In length) – structure prestressed concrete,

5)Structural design new Auditorium in Rome; coverage in laminated wood with light of 50 m and structure reinforced concrete.

6)Bridge over the river Agognate Italy (rail, 113 m. Long) structure in steel beams and reinforced concrete,

7)Consolidation structural of two buildings owned by the Bank of Italy in Rome,

Date

2000/2002

Employer&Location

Engineering firm Franco Braga Rome & Studio Pietrangeli srl, Rome

(TOTO CONSTRUCTION SPA)

Sector

Structural Engineering &Construction

Type of employment

Civil Engineering structural

Responsibilities

(Structural Design)

1)Structural design Dams gravity ', method FEM analysis, feasibility study', design foundations of Dams with palisades, study of permeability 'and continuous flow in the basins. calculation of calories hydration concrete, dimensional analysis reinforcing rods, jet grouting side walls, mechanics of rocks and structural adjustment of the same.

2)Design cantilever bridge with pre-stressed concrete box section, for a total length of 18 km, the program used sap v2000 and classic application by using sheets EXL,

Customer City of Naples

Structural design underground line of the subway Napoli

Structural design of underground napoli, line 1, executive structural phases of progress and monitoring of deformations of the subsoil, struttursle modeling of soil mechanics, structural design in subway line reinforced concrete pipes, cracking state in time. The design is showed difficult for the presence of the stratum to a depth of 10 m.

structural design station Santa Maria, reinforced concrete structure, with top cover made of steel and glass.

Date

2001

Employer&Location

Municipality of ROME Italy

sector

Consultant Public contract, Structural Engineering

Type of employment

Consultant Civil Engineering structural & management construction costs

Structural Design of Gym (site in Via Caio Cestio in Roma) Polyvalent of 1400mq covered with laminated wood. Modeling project a.c. and covering. Project presented at the civil engineering in Rome, regulations applied, EC8 the cover had a length of 35 meters. the structural design was completely made by me while I was working in the studio of prof. Pietrangeli, the program that I used was Strauss7.

Responsibilities

(Structural Design)

Date

2002

Employer&Location

Client: Mario Morlungo of Rome

sector

Construction

Type of employment

Consultant private contract Civil Engineering structural

Responsibilities

(Structural Design)

1)Integral design of the building with 5 floors ( site in via clementi,zone portuense Roma),

Project presented at the civil engineering in Rome, legislation used EC2-EC8, NTC

2)structural design steel shed of 4000 square meters, height of 7 m for use remittance trucks, calculating estimated costs and preparing contracts with companies buildings constructions.

Date

2002/2003

Employer&Location

TOTO construction srl Italy

sector

Engineering on behalf Prosystem engineering srl &Construction

Type of employment

Civil Engineering structural

Responsibilities

(Structural Design)

1)Integral design of Industrial warehouse made of steel floor 6500 mq connected to dwelling house a.c. site located in Industrial zone of Sulmona (AQ) Italy,

2)Structural design of reinforced concrete overpass total length of 400 m, wide 14 m location Teramo Italy,

3)Design structural steel bridge length 300 m, the bridge was performed with 5 main beams steel to center distance of 5 meters between them, the height of the steel beams have been designed with a height of 3.5 m, location Padova Italy

4)Integral design works of modernization and accommodation of aqueducts, sewers and roads, structural design of the storage tank for the supply of water of the whole country, the tank is designed in reinforced concrete with a diameter of 25 m and a height of 40 m, for the simulation I used sap 2000. Location Bugnara Italy.

Date

2003-2004

Employer&Location

Architect Ivo Lavieri (Roma) & Construction Company TOTO SPA, FIP SPA

sector

Structural Engineering&architecture

Type of employment

Consultant Civil Engineering structural

Responsibilities

(Structural Design)

1)Project of a complex reticular steel for use of advertising of height h = 75 m, Calculation program used sap 2000., location Rome Italy,

2)Structural adjustment of an elementary school built in the 50s, the structure and 'built entirely of reinforced concrete, structural adjustment of the floors and pillars, finite element simulation and executive structure. location Rome, I have used sap v2000, Reinforced floor of underground parking by carbon fiber bidirectional, built in reinforced concrete floor slab showed an arrow over the legal limit, at risk yielding.

3)Structural design foundation piles for the construction of underground car parks lateral to the existing historic buildings, the structural design was elaborated to sequences with the plastic method to simulate the lateral deformation of the ground and the state of stress in the existing buildings.

4)Restructuring mansory buildings and seismic adjustments, experimental technique of drying by injecting resin and steel bars.

5)Adjustment of seismic building Hotel (10 floors) in concrete ordinary action of consolidation and placing of insulators anti seismic Type FIP Elastomeric with lead core. location Bologna Italy,

6)Structural design 2 building of 25-story with floor space of 1,000 square meters per floor all structure is designed in reinforced concrete, with the basic seismic isolators location Padova Italy.

Date

2003/2005

Employer&Location

Prosystem engineering Ltd & Gruppo Salini SPA-ethiopia/argentina/Italy/Romania

sector

International Engineering Firm Engineering &Construction

Type of employment

Civil Enginer structural & hydraulics

Responsibilities

(Structural Design)

Hydraulic Implant location Bucharest, the distribution system covering an area of sourcing of 4 blocks Bucharest, hydraulic design and structural pressure pipes,

Electrical central planning, design of turbines, penstocks location ETHIOPIA,

structural design industrial building with steel roof light 40 m in a single span (Roma), for the poor ground conditions were adopted in the raft foundations with micro piles side, the structure covering an area of approximately 6000 square meters.

Structural design reinforced concrete foundations for the support of the hydraulic turbine for the production of electricity, study of the mechanics of vibrations and sizing elastomeric dampers, using software Strand7 / Ansis / Sap 2000 (Argentina)

Structural design building of 3000 square meters in plan and 80 m high reinforced concrete and steel, Buenos Aires Argentina.

Design lifting system and catchment area for the distribution of drinking water in the region of southern Ethiopia, the design of reinforced concrete tank height 45 m, capacity '22000 cubic meters of water, software Strand7 / Ansis / Sap 2000.

1)Design plumbing systems and tanks in reinforced concrete for the supply of drinking water location Bucharest, new zone.

2)Structural design bridge tipping prestressed concrete for a total length of 19 km, my role was to design batteries decks in areas where the geomorphological conditions were the worst and verify the working group that developed the entire structural design throughout path, intergrate with various professionals to seek together the most economical choice and be within the planned expenditures.

Date

2004

Employer&Location

Municipality of Roiate (Rm)& Municipality of ROME

sector

Public contract, Structural Engineering

Consultant Civil Engineering structural

Type of employment

Responsibilities

(Structural Design)

1)Manufactured Design of Municipal Elementary and Middle School, 4-story concrete and steel. Implant of water system and lift pumps for dirty water, design tanks compensation for the increase in capacity 'water country,

2)Structural design of storage tank in reinforced concrete, diameter of 12 meters and height 25 m, Lumped mass model, the structural simulation was performed with Straus7,

3)verification structural steel railway bridge arc with maximum length of 100m and arrow steel arch of 18 m, the structural testing took place with measurements of deformation and finite element simulation, before the intervention and after adjustment. Testing and measuring deformation.

Employer&Location

T-Quadro SPA

sector

Structural Engineering

Type of employment

Consultant Civil engineer Location Roma, City Grottaferrata

Responsibilities

(Structural Design)

Structural design Town houses in a residential complex with a total of 4000 sq m in residential structural design also includes the design for the consolidation slope inserting micro piles and retaining walls in reinforced concrete high over 15 m.

Structural design underground garage with relaxation room connected to historic building in central Rome Parioli, customer notary Privitera, the structural design was studied in stages, assuming the placement of poles up to a depth of 25 m along the perimeter, then run the necessary excavation and construction of the interior

• November- 2006/2011

T-QUADRO SPA ITALIA

Type Agency/Sector

International Engineering & Construction Company

Please note

.

when I began to work for this company as chief executive, after the first few months when I saw the works, I check the assignment as chief engineer at general contractor-project manager, but I did not stop to continue doing the chief engineer, was a extraordinary period, where I got to know internationally renowned professionals and to grow professionally.

Project Manager

Realization of International projects in the field of civil infrastructure portfolio with orders over 25000000 euro . the work achieved in the management of projects and their implementation, located in Rome, Milan, China, Romania,Russia. Management of Design Firm with number of employees of 330units

Project Manager

Lead engineer

Design and construction of a large residential complex for 25,000 housing units location 'overall portfolio St. Peterburgs 240 million euro, 15 participating companies among contractors and sub contractors, coordination of 15 architects, project manager 5, 5 construction engineers, suppliers and national international, feasibility study ', quotes, check the consistency of design, dismissal of companies ineligible, verification of work and payment of advances of the work..

The apartment complex was composed, on a stage riding, a tower of 250 m surrounded by an artificial lake with all around residential buildings, the project was fully developed architecturally and structurally from my staff, we collaborated with Russian engineers of St. Peterburgs was a fantastic experience, curing all stages of design to the end.

my major responsibility was control project calculations and closing of contracts with with the enterprise, brining the whole things to the administration.

Project Manager costruction

Design and construction of 60 buildings of design in the place 'Formello province of Rome, the total portfolio of 36 million euro, implementation of the road', sewage treatment plants and sewerage,

Project Manager Planner

Design and construction of 15,000 residential housing units, location 'Libya, building a hospital military and palace ministerial portfolio 79 million euro, 10 participating companies, six Italian and 4French companies,

2006

Project Manager Planner

T-Quadro -MG Ingegneria srl

International engineering firm & construction company

Design of multi-storey car park, The park stretches for a total area of 1,500 square meters per floor, for a total of 4 floors above ground and underground 8, the structure was built entirely of reinforced concrete, used sap software sap 2000 &straus 7. cost estimate and closing contracts with construction companies.

Designing structural steel bridge and concrete suburbs of Astana, bridge length 250 m, maximum height of 6 m section, use regulations, international code, sap software sap 2000 &straus 7

• November- 2006/2011

T-QUADRO SPA ITALIA &Planning Group srl &Salini SPA

China, Italy, Argentina, kazakhstan, Russia,Romania, UEI, KSA

Type of Agency/Sector

International Engineering Firm / International Constructions Company

• Head Planner/Projector

project manager planner

project manager planner

Design of steel and concrete bridges, cooling towers, storage tanks, design of reinforced concrete dams, location 'china,

Structural design buildings for use office steel, the premises cover an area of 5000 square meters with a maximum height of 34 m location 'China,

Project motorway junction

The project, implemented in the business center of Dubai, consists of a motorway junction with 3 underpasses, 22 bridges, spans up to 60 m. I follow the structural design of the complex in collaboration with external consultants.

• Projector structural dynamics, supervisor Professor Peter Pietrangeli Universiti Sapienza the Rome department bridge,

Structural design suspension bridge tipping steel and reinforced concrete, the large group of my work function design was the structural design of the FEM model and verification of different simulation models, we used in the project in addition to the 2000, and the sap straus 7, also Ansis maximum span of 250 m, with total length of 550 m, A4 variant Charterhouse

• Projector structural, supervisor Professor Franco Bontempi University Sapienza Rome department structural

Offshore structure: wind turbine high 100 m above sea level, power generation 5 MW, depth 'of the sea 45 m, structure made of reinforced concrete foundation piles and steel tower diameter 6 m thickness 7 mm, dynamic study of the structure, seismology of the area, identification of the waves more 'probable final sizing using international standards such as API, ASCI Eurocode, software Strand7 / Ansis / Sap 2000, location ITALIA (Foggia),

Project Manager

Projector structural

Professor Peter Pietrangeli Universiti Sapienza the Rome department bridge,

Structural verification of a cable-stayed bridge location 'Argentine Zara’te Brazo central span length 330 m, height of the antennas 110 m, length 550 m in suspension! verify structural dynamics, calculation of natural period of the structure by simulation and passage of convoys (occurs with sensors of deformation and vibration), final technical report, software Strand7 / Ansis / Sap 2000/midas civil .

Project Manager

Projector structural

Architectural and structural design, construction of a building of modern design for commercial and representative offices, the complex is built in a total area of 26000mq developed for a total height of 180 m, the structure made of steel and concrete with glass exterior with wood cover wavy. Location bukarest

• Chief engineer

Design structure Offshore, wind blade steel height 160 m 7 m diameter with thickness 7 mm, height of the sea 60 m. Foggia ITALY

Chief engineer,supervisor Professor Gallerano bontempi Universiti Sapienza the Rome department of hydraulics

Design power 50 MW hydropower plant location 'Riva di tures, intake structure, penstock, central work of restitution, turbines, manufacturing companies ABB Energy Automation, final technical report, software Strand7 / Ansis / Sap 2000

• Chief engineer

supervisor Professor Gallerano Bontempi Universiti Sapienza the Rome department of hydraulics

Multi-purpose hydroelectric project Revision of the feasibility

Studies and preliminary design, Project detail, Tender documents, location Malawi, Mozambique. final technical report, ANSIS, PRIMAVERA6,sabie. At this preliminary stage, the study elaborate documentation on the zone, annual rainfall, maximum and minimum capacity of the Sabie River, the same river where there is already a dam built with natural materials, the data collected will continue to preliminary executive. given the high concentration of population and area it was decided to design a hydroelectric plant on the surface, less invasive, some economically less productive but also less expensive.

Customer

Eni SpA

Supervisor Project

Head of Project

Date

Employer&Location

sector

Type of employment

Main activities and responsibilities

Structural Design system Offshore Sicily Italy, In this part I prepared the numerical model for the structural calculation, dimensioning and structural executive with the participation Prof. Franco Buontempi University Engineering of Rome “La Sapienza”.

Customer the municipality of Milan Italy

New underground Milan Line Station Three Towers

Structural design underground line of the subway Milan, progress status, the study of the deformation zone, structural design and executive the station and feed holes.

The stretch under construction in the 5 line includes 10 stations placed along a double-barreled path that is developed in the city for about 7 km, and sees the cross section of the former Trade Fair in a central position. To respect the opening of the constraint line at the inauguration of the Expo 2015, it has also defined a strategy of excavation of tunnels which involves the simultaneous use of 4 TBM, 2 of which are to be introduced at the San Siro and 2 to be introduced at monumental, but which are all extracted in correspondence of the former Fair areas, using for this purpose to pit structures specifically integrated within the station "Three Towers."

2008

T-quadro spa Studio & Pietrangeli Ltd Roma

Singapore,Manila,India,Angola

Structural Engineering

Chief engineer&Project manager, Civil Engineering structural

1) Structural design of bridge steel body location Singapore, length steel bridge 325 m, the supporting structure is constituted by an arch that holds a caisson placed beneath, the whole is made of steel and form a bearing structure arc thrust eliminated, as the lower caisson works as a chain for the arc; the Arch was designed from three tubes of diameter 609 mm and thickness 40mm connected by pipe diameters of 139.7 and 12.5 mm thick, every 5 meters a closed spiral rope of 65 mm diameter hangs the deck to 'arc, by means of a lug fixed on the arc and an adjustable fixed inside the body,

2) Structural Design prestressed concrete viaducts, location 'Manila,viaducts length 25 km, the new viaduct needed to increase the volume of traffic in the area of the Ninoy Aquino International airport aereoport, the entire viaduct was designed with central pier resting the 'deck of apposite elastomeric deformation, for foundations they were adopted poles foundations for a maximum depth of 25 m.

Power plant verification Dynamics structural supports Turbine Ethiopia,in collaboration Naples University Federico II,

3) Dams to carry out the project of rehabilitation, expansion and modernization of Dam. The project includes the heightening of the structure by 30 meters, the modernization of the generating units of the Central 1, replacing the four 45 MW turbines by four 65 MW turbines, and the construction of a new plant, called Central 2,Type of Dam arch Height 132 m,Lenght 135m, Surface area 5,5Km”2, Turbine Francis-type,Kwanza River

2009/2010

Commissioned by State of Romania

Project Manager planner constructions

Design of a military complex of 10 hectares near Bucharest, hospital, civilian homes, the central building,

Design of reinforced concrete parking elevation of h = 16 m and 5000 square meters of plant location Bucharest, Reference standards EC8, international code.

• Type of Agency/Sector

• 2009/2010

TQuadro SPA & MG-Engineering Ltd

Commissioned by of State LIBIA Muammar Gheddafi

Please note well

My office MG Engineering Ltd. had the great opportunity to meet Muammar Gheddaf visiting Italy for the G8 summit, the head of state of Libya will fall in love with a small country town in the province of Rieti close to Aquila ITALY, thanks to our knowledge the place we met Muammar Gheddaf, where I personally along with Italian delegation we presented the project for the revival, a monumental project that impassioned Gheddafi entrust us to the point of the design work

Project Manager

Head Planner

MG-INGEGNERIA SRL & TQuadro SPA Muammar Gheddafi

Project Manager

Head Planner

Designing a skyscraper height of 450 m, architectural structural design, in addition to the new university and the Libyan parliament, the clerk was treated with Gaddafi himself and his staff in the Libyan embassy, overall portfolio for the contract 4.5 billion euro. Location Al bayda. Designing and building water systems location 'Sabha, design and construction of steel tanks elevation preassembled in place, location Sabha, the work was fully developed by the engineer Gentile Valter, from architectural design to the structural, cost analysis, contact with businesses. participated in the project over 350 specialized human resources. before the war ended all project phases, but only realized some buildings and tanks.

Date

2013

Employer&Location

HORIZONT 2020 CEE Europe & FINMECCANICA

sector

Organization for research and development in Europe

I’M Inscribed in the platform as external EXPERT consultant in HORIZONT 2020

Type of employment

Research in Engineer

1)Design patent automated recycling, machine able to collected waste differentiated in automatic mode and computerized, deposited in 2011,

2)Presentation of new project shovel patented by myself intelligent wind, this system patented by me allow a longer period of operation than conventional wind turbines on the market.

3)New process of monitoring structures, in case of violent earthquake can monitor the history of all of the stresses suffered by any building.

Date 2011-2015

MGingegneriasrl/Hlike ITALY srl/LGEngineering&architectur

(Consulting architects and engineerings P.L.C.) Addis Ababa,Zambia,Italy,Romania,

Type of employment

Responsibilities

Project Manager,

Chief Structural Design

Structural Engineering&Construction locality Addis Ababa/ Bucharest/Dubai Romania/French/Italy

Project manager responsible in project and



Contact this candidate