HIMANSHU AGGARWAL

Shivlok Colony, Phase-*, House No.-M5B,

Haridwar, Uttarakhand-249403, India

Email Id: ac433t@r.postjobfree.com

Phone: +919*********, +918*********

CARRER OBJECTIVE

With the Experience in the field of Substation Power Automation System in India & in Abroad, I look forward for an opportunity to display my skills and to pursue a career in an organization which provides, challenging work environment and good opportunity.

EXPERTISE & SUMMARY

Protocol application experience with IEC 60870-5-101, 60870-5-104, IEC61850, MODBUS, OPC, PRP, TCP/IP and serial protocols.

HMI development, configuration & implementation of Substation Automation System.

Knowledge of Substation Automation Systems and SCADA applications, RTU, communication protocols & interface design

Experience SAS/SCADA Integration with SIEMENS Siprotec Numerical relays (Protection & BCU), ABB, ALSTOM, SEL etc.

Experience in Preparing Communication Network Architecture, Signal lists i.e. Control, Protection, Status, Measurements etc.

Experience in conducting FAT & SAT and commissioning activities of SAS System.

Experience in preparing Engineering documents and remote support to Site.

Experience in establishing communication with Control Centers.

Communication experience including RS232, RS485, fiber optic, serial & Ethernet networking (IP addressing schemes, subnets).

Communication interface design and configuration with devices including PC's, printers, time sources with SNTP, NTP, Data Concentrators, IEDs (meters, protection relays).

Experience with Siemens Simatic WinCC, Sicam PAS, Sicam SCC, Simatic Digsi 4, Digsi 5, RTU ToolBox II

Experience with Configuring Different Ethernet switches like Ruggedcom, Hirschmann, Cisco & Routers

Experience in Conducting Customer Training Programs.

EXPERIENCE

SIEMENS LTD. JULY 2015-CURRENT

(Sr. EXECUTIVE ENGINEER)

My Domestic & International Project Details as below:

Eskom Development Project (Johannesburg, South Africa):

Done SICAM PAS Configuration i.e. CFC,ST Logics as per client’s specifications

Used IEC 61850 protocol for communication with SIEMENS SIPROTEC relays

Done signals Configuration and testing over IEC 101 & IEC104 Tele-control protocols

Done WinCC HMI configuration as per client’s requirements.

Done project testing as per client’s test procedures and requirements.

Ashugnaj North Bangladesh:

HMI configuration and graphics designing

Used IEC 61850 protocol for communication with SIEMENS SIPROTEC relays

Configured IEC 61850 server to send required datas to DCS.

Done signals Configuration and testing over IEC 101 & IEC104 Tele-control protocols

Siemens SICAM CMIC RTU configuration using ToolBox II for receiving data from DCS to substation and parameterization of all signals

MAHO & NAULA SUBSTATIONS (SRILANKA) 132/33KV:

HMI configuration and graphics designing

Used IEC 61850 protocol for communication with SIEMENS SIPROTEC relays

Server configuration with newly added extension bays

Remote NCC Testing and witnessed over IEC 101 & IEC104 Tele-control protocols

SAS level Substation testing with client witnessed.

POWERGRID KUDGI (KARNATAKA) 765/440 KV:

Siemens PAS server (SIEMENS SICAM PAS) installation & configuration.

WINCC HMI software installation, HMI configuration and graphics designing

Ethernet switch configuration (hirschman).

GPS installation and time synchronization with NTP.

Used IEC 61850 protocol for communication with SIEMENS SIPROTEC relays, BCUs and ABB REL670 relays and testing of all parameters.

70MW SOLAR POWER PROJECT, WELSPUN (A.P.):

Siemens Sicam SCC installation & configuration.

WINCC HMI software installation, HMI configuration and graphics designing

Ethernet switch configuration (Siemens Ruggedcom).

GPS installation and time synchronization with NTP.

Used IEC 61850 protocol for communication with SIEMENS SIPROTEC relays, BCUs and Protection relays and testing of all parameters.

TANOT WIND POWER, JAISALMER:

Energy Meter integration and communication with SCADA over Modbus protocol

Siemens SICAM CMIC RTU configuration and parameterization of all signals.

FAT JOB AT ABB,BANGALORE:

Siemens Sicam PAS, SCC installation & configuration for Powergrid Vadodara Extension.

Done All ABB IEDs communication with SAS.

HMI configuration and graphics designing

Ethernet switch configuration (Siemens Ruggedcom).

Successfully completed FAT with Client.

Other than above mentioned,Successfully commissioned & prepared documentation for ongoing projects

SARLA TECHNOLOGIES, DUBAI AUGUST 2013-JUNE 2015

(PROJECT ENGINEER)

My Projects with DEWA (Dubai Electricity And Water Authority) as DEWA approved Engineer in Dubai (U.A.E.) as below:

EMAR SUBSTATION & THANYA SUBSTATION REFURBISHMENT PROJECT (DUBAI):

Siemens SICAM PAS Configuration changes as per requirements.

Siemens Digsi CFC changes and Signals addition/edition as per requirements.

.Scd file updation through IEC61850 protocol in Station computers and Gateways and done all Relays communication.

HMI Graphics Modification as per requirements.

Fibre Optics link networking for outage feeders.

Operation, maintenance and trouble shooting for entire SCADA communication network.

Done Windows7 configuration and all user administrator setting

Prepared all signal test reports in MS excel.

CONTRIBUTION IN JO11 SRANCHES FAT (DUBAI):

Documentation for Sranches FAT i.e. Application pictures, Interlocking pics, FAT comments updation, Log Book.

Done testing for 11kV and 132kV Typical feeders.

Done System related signals testing.

HMI graphics modification.

DIGSI Signals addition and CFC modification.

Also went for troubleshooting the problems in Golfcmty and Ksta site time to time .

AASHIRWAD ENTERPRISES (A SIEMENS THIRD PARTY ) OCT 2010-JULY2013 (SCADA ENGINEER)

ADANI POWER PLANT 400KV, HVDC, MUNDRA (GUJARAT):

Siemens PAS server (SIEMENS SICAM PAS) installation & configuration.

WINCC HMI software installation, HMI configuration and graphics designing.

.scd file exported from IEDs and imported to SCADA server and integrates all HVDC signals through IEC 61850 protocol.

Ethernet switch configuration (Hirschman).

Networking and communication between PAS Server and Kiosks (Relays, BCUs).

Establish Communication from Siemens Data Concentrator (Signals from ABB, AREVA, NARI, HVDC) to LDC using 60870-5-101 slave protocol.

Successful Completed Site Acceptance Test protocol

CHHABRA POWER PLANT, RAJASTHAN:

HMI Graphics modification and troubleshoot SCADA related problems.

Establish communication through KALKI Converter between SIEMENS Scada and ABB DCS using MODBUS protocol.

Establish communication between SIEMENS PAS and RTU using IEC-103 protocol and configured signals in SCADA.

Establish communication from Chhabra Power plant to LDC using 60870-5-101slave protocol.

PGCIL, GIS BASED SUBSTATION, BIDADI-BANGALORE(Karnataka):

PAS Server (SIEMENS SICAM PAS V6.0 SP6) installation & Configuration.

HMI (WINCC V7.0 SP1) installation & Configuration

Ethernet switch configuration (RUGGEDCOM).

Used IEC 61850 protocol for communication with SIEMENS SIPROTEC relays, BCUs and ABB REL670 relays and testing of all parameters.

LDC Communication through SIEMENS MODEM using 60870-5-101 slave protocol.

PGCIL, 765kV/400kV MEERUT (U.P.) & PGCIL, DHURI(PUNJAB):

PAS Server (SIEMENS SICAM PAS V7.0 SP3) installation & Configuration

HMI (WINCC V7.0 SP2) installation & Configuration and graphics designing.

Network configuration using cat5 cable, FO cable patch cord between Server, HMIs, EPC, Printer, Relays.

Ethernet switch configuration (RUGGEDCOM).

GPS installation and time synchronization with NTP.

Used IEC 61850 protocol for communication with SIEMENS SIPROTEC relays, BCUs and ABB REL670 relays and testing of all parameters.

LDC Communication through SIEMENS MODEM using 60870-5-101 slave protocol.

Remote HMI for remote operation installation and configured.

Successful Completed Site Acceptance Test protocol.

Also worked in CGPL (TATA POWER)-Mundra (Gujarat), PGCIL-Bachau (Gujarat), GETCO-Kosamba (Gujarat), PGCIL-Fatehpur (U.P.),ADANI POWER PLANT HVDC-MAHENDERGARH (HARYANA).

EDUCATION

B-Tech - App. Electronics and Instrumentation Engineering (2006-2010)

Skyline Institute Of Engineering and Technology, Greater Noida with 75.06%

Intermediate

Saraswati Vidya Mandir, Haridwar With 73.3%

High School

Jwalapur Inter College, Haridwar With 77.7%

SUMMER TRAINING

Summer Training in Jubilant Organosys, Gajraulla (U.P.) in‘Instrumentation Department’ from 15.06.2009 to 25.07.2009.

PERSONAL DETAILS

Father’s Name : Arvind Kumar Aggarwal

Mother’s Name : Kanchan Aggarwal

Date of Birth : 02-Oct-1987

Marital Status : Married

Sex : Male

Hobbies : Swimming, Listening to music

Language Known : English & Hindi

DECLARATION:

I do hereby declare that all the statements as mentioned above are true and correct to the best of my knowledge and belief.

HIMANSHU AGGARWAL

Contact this candidate