Sign in

Engineer Design

Blacklick, Ohio, 43004, United States
January 10, 2018

Contact this candidate

Deepak Maru

**** ********** ******, ********, **** 43230

Ph. No.: (614) ***-**** (Cell Phone); (614) ***-**** (Home)



A position as a Senior Mechanical Engineer involving product design & development.


20 years of experience in the Aerospace industry, Oil & Gas Industries.

Extensive Hydraulic and Airframe Structures experience in development, design, analysis and installation of aircraft.

Hydraulic experience 15+ years: Developed, designed and installed, and analytical experience of solenoid operated valves of process gas piping system in Oil & Gas Industries as wells various pumps, including flow control components like valves, pressure vessels, piping, regulators, etc.

Handled various valve designs including Solenoid Valves, support analysis functions: ASME design reports, qualified life reports, fluid flow / heat rise / thermal distribution studies, etc.

Analyzed and designed various types of applications of aerospace, automotive and process gas valves (such as landing gear Controlled Manifolds, process gas piping, for the Anti Surge valve, Purge valve, Vent valve, and pressure safety valves) using ASME VIII Div. 1 & 2, and ASME specification B16.44, B31.5, B31.6, and B31.8, and NACE.

Designed, developed Hydraulic Schematics, selected components, required to perform the tests on calibration and performance of Hydraulic Test Bed cart.

Performed Testun on Hydraulic components. Also, test performed on functional test in aircrafts per FAR 23 & FAR25 chapters.

Project management experience including hands on experience with product life cycle development.

Supervised the installation of new equipment Installs and repairs of turbo compressor parts and products.

Studied customer blueprints, schematics, manuals, with other specifications to determine installation procedures and computer-generated reports.

15000+ hours of experience in 3D modeling using CATIA V5, CATIA V4, & Intro to Pro/E Wildfire and FEA knowledge.

Familiar with various regulations / requirements / codes for ASME boiler / pressure vessels, ISO 9001, AS 9100, etc.

Constructed Bill of Material (BOM) to order complete package of Engine Build Up.

Areas of expertise:


B.S. Mechanical Engineering – VJTI, Matunga, Mumbai, India July 16, 1986

M.S. Mechanical Engineering – Wichita State University, Kansas – 21 Credit Hours Completed


Emerson Residential & Commercial, Sidney, OH 04/03/2017 – 8/2/2017

Engineering Project Lead.

Complete New AHT Cold Room Medium Temp. Build up and tested at Test Bed Room with performance of AHT unit and Emerson Proto type unit.

Complete the Bill of Material with pricing, delivery date, costing, and follow up of with supplier for delivery the components to build up on time.

Complete wind tunnel test with different manufactured fans motors to measure CFM, Watts drawing during high frequency Hz.

Aerotek Inc., Carlisle IT, Franklin, WI 3/14/2016 – 11/16/2016

Mechanical Project Engineer II

Support planning of Customer requirements per product developments of ARINC 791 Antenna Systems, KANDU, MODMAN, APM Installation per contract agreement documents.

Using Creo-2 and Wind Chill Process Design Develops, and detailing of APM, MODMAN, an KANDU Installation with required load capacity to design new structure support Layouts. Detailed design, Installations, and KIT’s of A300-200/-300 Aircraft.

Develops, Design, and writing Weight and Balanced reports, Master Data List, Anti Collision Light reports with analysis of A330-200/-300. Flammability reports of A330-200/-300 with coordination of Electrical Engineers.

Birlasoft Inc.,, GE Healthcare, Waukesha, WI 9/26/2015 – 3/11/16

Sr. Design Engineer

Designed, analyzed and created models of new Alpha and Beta MRI Machines for productions.

Existing design analysis of power distribution cabinets, rearranged the modules. Re align the module sufficient air circulation, design including redesign new support, or modifying existing support.

Performed air circulation test per Digital cabinet require by using existing test bed.

Track the Production scheduled to meet requirement for production. Proto type component support build up and installed in proto cabinet design. After installation with all support through the cabinet with cable installation.

Parker Hannifin Aerospace, Hydraulic Filter Division, Metamora, OH 9/22/2014 – 06/30//2015

Sr. Systems Design Engineer

Designed, analyzed and created models of new aerospace filter products.

FEA Stimulation Analysis of Filter Core design including Filter Collapse Pressure Test, and Differential pressure test

Developed and Designed Hydraulic Schematics of test bed, Selected components for test bed required to perform the test, for required test data.

Develop top-level requirements definition, requirements flow-down, requirements decomposition, technical risk identification, and requirements verification and validation.

Performed the hydraulic filter test per ATR provide by customer. Meet the customer requirements of the poroducts assembly.

Performed systems integration design including composite carbon fiber components.

Estimate overall cost of test bed’s components, hardware, structure frames and labor.

UTC, Rockford, IL 06/02/2014 – 09/18/2014

Senior Systems Engineer (Contract)

Developed, designed, selected components needed for test bed calibration. Did the calibration and performance of hydraulic test bed for EMU Generator test.

Calculated overall cost of Hydraulic Test Bed EMU Generator.

Komatsu America Corporation, Peoria, IL 61603 12/2013 - 4/2014

Senior Design Engineer

Designed, analyzed and created models of new product Hoist Cylinder Analysis using Pro-E CAD tools & Wind-Chill Process.

Develop top-level requirements definition, requirements flow-down, requirements decomposition, technical risk identification, and requirements verification and validation.

Detail Study and Analysis of bolted joints of hoist cylinder head and retainer cap with stress & fatigue analysis.

Communicated on a weekly basis with the Brakes System Supplier and tested New Brakes component, Brake’s Caliper, and Pad to meet ISO 3456 specification.

Determined the root cause of U50 existing Combo valve problem and advised supplier to change design of Combo Valve with new material specification.

GULFSTREAM AEROSPACE CORPORATION Savannah, Georgia 05/2011 - 02/2013

Technical Engineering Specialist II (Contract)

Designed and developed various mechanical systems such as Landing gear, Hydraulic systems, brakes systems, ECS system of business jet aircraft using CATIA V5 and Smart Team Process.

Support all phases of design review.

Member – Integrated product team.

ROLLS ROYCE ENERGY SYSTEMS Mount Vernon, OH 08/2008 - 01/2011

Mechanical Engineer Specialist

Managed various Customers’ Solution Business Projects including P & ID of Hydraulic Start System, Hydraulic system, Bleed Air System, Fuel (Liquid/Gas) System, and Air System of old & new packaging.

Develop top-level requirements definition, requirements flow-down, requirements decomposition, technical risk identification, and requirements verification and validation.

Developed designed, analyzed, installed and test solenoids operated valves for High Pressure LPG Gas.

Execute design changes of power generation and mechanical applications consistent with the customer specifications.

Analyzed and designed process gas piping, for the Anti Surge valve, Solenoid Control Purge valve, Vent valve, and pressure safety valve using ASME VIII Div. 1 & 2, & specification B16.44, B31.5, B31.6, and B31.8, NACE.

Analyzes engineering data to determine feasibility of product proposals, equipment specifications, performance requirements to determine designs that can be produced by existing manufacturing facilities and methods.

Various Projects completion with, drawings; procure parts, supplier print interpret, quality, and Costing of Complete filter design with manpower hour usage to assemble the filter element.

Manage entire project’s with time management, scheduling, interpret the cad drawing print, delivery with qualification documents and delivery to customer’s,

Textron Aviation, Wichita, KS 08/1995 - 06/2008


Designed and developed various mechanical controlled Valves and Manifolds of hydraulic systems (Landing gear, Hydraulic systems, Solenoid operated Parking Brake Valves, Anti skid Valve, Brake Metering brake systems, ECS system etc.) of business jet aircraft.

Prepared mechanized system requirement documentation as per FAA regulations, drafted compliance reports and test plans for FAA certification.

Designed 3D models and assemblies in CATIA V5, V4 CAD software. Prepared detailed designs including tolerances, clearance analysis and material specifications.

Manage the hydraulic system schematic diagram per system modification of Citation Sovereign, CJ3, CJ4, and Mustang Projects.

Performed environmental test such as salt spray, dust, cold temperature test per ISA +30 and -30 temperature, lightning strikes test of landing gears hydraulic actuators.


FAA 21 & FAR 21 & 25 at Wichita FAA training center, Wichita, June 1998

Hydraulic Engineering Training at Vickers Hydraulic Engineering School, Mumbai, India June 1989

Contact this candidate