Resume

Sign in

Power Plant Control

Location:
Bacoor, CALABARZON, Philippines
Posted:
November 29, 2017

Contact this candidate

Felipe Gainza Lemos

Purok *, Barangay Calicanto Batangas City, Philippines 4200

Email : ac3ivq@r.postjobfree.com

Mobile no. +639153750464

+639171248014

+639293085491

Position : Instrument Technician (Construction/Precom/Commissioning)

Career Objective:

To pursue a challenging career in the field of Oil and Gas, Petrochemicals, Power Plants, Quality Control, Commissioning, Pre-Commissioning, De-Commissioning, Control and Maintenance, so that I can utilize my knowledge and skills on instrumentation effectively and efficiently in a practical manner in my professional approach.

Carrer Summary:

Over 10 years of experience in the field of Instrumentation in related to Oil and Gas Refinery, Oil Rig, Semi Sebmersible Platform, Jack Up rig, Onshore and Offshore, Power Plant,Petrochem, Methanol Plant, Nickel Mining, Operations, Shut down, Calibration, Testing, SIT Site Acceptance Test, Operation Test Procedure of ICSS Integral Control and Safety System, Troobleshooting of Process Measurements and Coontrol Instruments as interfaces in PLC and DCS during plant construction, Modification, Hook Up, Precomm/Commissioning and Plant Start Up.

Educational Background:

Tertiary:

Batangas State Univercity (Formerly Pablo Borbon Memorial Institute of Tehnology PBMIT)

1990-1992

Rizal Avenue, Batangas City

Course: Power Plant Maintenance Technology (PPMT)

Secondary:

University of Batangas (Formerly Western Philippine Colleges) WPC

1986 -1990

Hilltop, Batangas City, Philippines

Employment History:

Mitsubishi Corporation (Haskem)Global EPC Solution

Balingasag 3 x 55 MW Power Plant Project

Balingasag, Misamis Oriental

Dec. 29, 2016 to April 30, 2017

Position: C&I Technician

Duties and Responsibilities:

Performed functional loop checking of diff kinds of process instruments, such as transmitters Pressure, Level, Flow, Temperature. Control valves positioner, MOV (Motorized operated valves), On/Off Valves, at Boiler and STG (Steam Turbine Generator) Unit 1, 2 and 3.

Conduct loop checking of all signals both DI/DO (Digital Input/Output)

Analog (Input/Output) from field instruments to marshalling cabinet

Going to DCS.

Field calibration, troobleshooting, modification, rectification of MOV field instruments prior for RFI (Ready for Instpection) as witness by the Client.

Replacing defective instruments such as RTD, Thermocouples, switches, modification of stainless steel tubing for transmitters and Control Valves.

Assist to Boiler Operation Group during Plant start up, steam blowing and leak testing.

Modification, implementation, testing and commissioning on Power Management System using PLC

particular in the confirmation of those I/O signals.

Involves in troubleshooting of process field instrumentation and automation faults, logic interlock (intermediate & ESD system)

Work on different units for trouble shooting of instruments faults/problem to process dept.

Employment History:

San Gabriel Avion Project IEG 97- 115 MW Open Cycle Power Plant Philippines

First Balfour / CJI

Sta Rita Kalsada, Batangas City

Nov.9, 2015 to April 5, 2016

E&I Technician

Duties and Responsibilities:

Reading and implementing of P&ID drawing location plan, hook up drawing, Instrument standard typical installation of differential types of field instruments such as Level, Temperature, Flow, pressure gauges, flow element, differential pressure transmitters, ultra-sonic transmitter and control valves.

Reading and interpretation of instrumentation drawings, able to perform cable installation, pulling, dressing, glanding and terminations.

Assigned in punchlist clearing, modification as per instruction of the QC department.

Cable pulling of lighting fixtures, on/off switches, junction boxes, local control panels. Splicing, glanding and termination.

perform continuity check of pole to pole electrical cables and going to electrical distribution panel.

Megger testing of electrical cables based on plant requirements.Installation of socket outlet, welding socket in Control building as per layout drawing.

Glanding and termination of emergency shutdown push botton, Control valves, transmitters,local control panels, switch control, low and medium voltage etc.

Fabricate, layout and installation of cable tray and its support, rigid conduit pipes,PVC pipes and flexible pipes for instrument cable trays.

Employment History:

Asiapac Commissioning Services PTE LTD

Brunel Technical Services Manpower Corp.

Shell Philippines Exploration B.V.

Shell Malampaya Phase 3 Depletion Compression Platform Project (MP3/DCP)

Malampaya Shallow Water Platform Palawan (Offshore)

Instrument Commissioning Technician

Feb.8,2015 to Aug.29,2015

Asiapac Commissioning Services PTE LTD

Brunel Technical Services Manpower Corp.

Shell Philippines Exploration B.V.

Shell Malampaya Phase 3 Depletion Compression Platform Project (MP3/DCP)

Keppel Subic Shipyard, Zambales (Onshore)

Instrument Commissioning Technician

Sept.15,2014 to Feb.4,2015

Duties and Responsibilities:

Pre-Commissioning/Commissioning of Siemens Turbine Gas Generator A&B, Siemens Gas Compressor A&B including the whole Instrument Process System and the Unit Control Panel HMI Rolls Royce PLC going to Emerson DCS through Modbus Communication to ensure that all the signals including alarms is in accordance.

Pre-Commissioning/Commissioning of Inert Gas Generation Package, Fuel Gas System, HVAC System, Fire and Gas System, PAGA system, Instrument Air System, Water Mist Release, Closed and Open Drain System

Performed Functional test of Fire and Gas System such as LOS Line of sight gas detectors, Flame detector, smoke detectors these also the test of Cause and Effects.

Perform Functional test of all the transmitters connected in N2 package (Nitrogen)

Perform Valve stroking to make sure that valves moving opening and closing 0 to 100%.

Assist for Rolce Royce Gas Turbine vendor to installed field instruments that connected to the engine. Functional test of field instruments prior to Pre comm / Commissioning activities.

Carry out all the signals from field intruments going to HMI and from HMI to DCS as witness by the vendor of Emerson personnel.

Simulations and Functional testing of signals for DI/DO from Electrical Switchboard MCC for Motor Control including ESD to ensure signals is in accordance to the DCS.

Calibration, Troubleshooting, Rectication and Functional Test of Pressure and Flow Control Valve, Hydraulic Valve, Shut Down Valve, Blow Down Valve, Antisurge Valve and On/Off Valve for DI/DO including ESD to ensure the signal is in accordance to the DCS and set the Instrument air working pressure.

Pre-commissioning, Testing and Commissioning, Pre and Start-up and operation and maintenance on the systems and modules such as: Fire & Gas, Safety Instrumented System (SIS), Emergency Shutdown(ESD), Process Shutdown (PSD), Process Control System (PCS)

Loop checking/ loop testing/ functional and matrix testing of Air Handling Unit AHU) instruments such as pressure/temperature/flow transmitters/ switches.

Employment History:

Asiapac Commissioning Services PTE LTD

SMOE Zawtika Gas Production Platform

Sembawang Shipyard, Singapore

August 23,2013 to January 8,2014

Instrument Commissioning Technician(Onshore / Myanmar Offshore)

Duties and Responsibilities:

Incharge for Fire and Gas system commissioning activities, Functional loop checking of different kinds of devices Such as Flame detectors, Gas detectors Smoke detectors for addressable device.

Conducting Operation test procedure (OTP) for Fire and Gas System to activate the smoke detectors by simulating solo smoke tester, these will be to test the Cause and effects procedure.

Assist for Vesda Xtralis Vendor for functional loop checking of all panels for air sampling point.

Perform alignment for line of sight gas detectors both transmitter and receiver.

Assigned in functional loop checking of instruments in Deluge system, Fire water pump,Super Heater Package, and perform (OTP) perform operation test procedure.

Reporting to the Lead and submit all the ITR forms daily.

Simulations and Functional testing of signals for DI/DO from Electrical Switchboard MCC for Motor Control including ESD to ensure signals is in accordance to the DCS.

Calibration, Troubleshooting, Rectication and Functional Test of Pressure and Flow Control Valve, Hydraulic Valve, Shut Down Valve, Blow Down Valve, Antisurge Valve and On/Off Valve for DI/DO including ESD to ensure the signal is in accordance to the DCS and set the Instrument air working pressure as required.

Loop checking/ loop testing/ functional and matrix testing of Air Handling Unit AHU) instruments such as pressure/temperature/flow transmitters/ switches.

Perform wire checking of field instrument to junction box up to Control Room.

Shutdown(ESD), Process Shutdown (PSD), Process Control System (PC

Perform of signal simulation and functional loop testing of field instruments with the coordination of Boardman on DCS console for PRM to obtained and confirmed of those I/O signals.

Involves on the teams for plant shutdown, restoration, testing and commissioning and start-up.

Performing of control loop checking, calibration, recalibration, troubleshooting, verification,rectification, modification and simulation of various instrumentation and control instruments.

Employment History:

JGSUMMIT NAPTHA CRAKERS PROJECT

KUMYANG ELECTRIC COMPANY LIMITED

Brgy. Simlong Batangas City

June 25, 2012 to Feb. 25, 2013

Instrument Supervisor

Duties and Responsibilities:

Conducting daily tool box talk, safety awaireness, and every day activities.

Incharge for the installation of cable duct, supervised and give some instruction with the foreman for the fabrication and installation of supports as per the projects specification and engineering drawings.

Supervised for the Installation of different kinds of process instruments, like transmitters, pressure gauges,thermocouples both process and utility area.

Supervised the fabrication shop for other activities, such as preparation of supports,stancion for instrument, cable tray supports.

Testing and Commissioning, Pre and Start-up and operation and maintenance on the systems and modules such as: Fire & Gas, Safety Instrumented System (SIS), Emergency

Shutdown(ESD), Process Shutdown (PSD), Process Control System (PCS)

Perform of signal simulation and functional loop testing of field instruments with the coordination of Boardman on DCS console for PRM to obtained and confirmed of those I/O signals.

Involves on the teams for plant shutdown, restoration, testing and commissioning and start-up.

Performing of control loop checking, calibration, recalibration, troubleshooting, verification,rectification, modification and simulation of various instrumentation and control instruments.

Testing of fire alarm, smoke detector and heat protector

Perform loop checking and loop setting of Valve Air Ventilation(VAV) to the clientas per Engineer schedule.

Loop checking/ loop testing/ functional and matrix testing of Air Handling Unit AHU) instruments such as pressure/temperature/flow transmitters/ switches.

Perform wire checking of field instrument to junction box up to Control Room.

Employment History:

SPIE Oil and Gas Services Middle East L.L.C

SBM OFFSHORE Single Bouy Mooring Inc.

ODEBRECHT / DELBA III TDS 2500 Semi-Submersible Drilling Rig Project (Onshore)

Abu Dhabi, UAE

May 5,2011 to December 12, 2011

Instrument Commissioning Technician

Duties and Responsibilities:

Calibration of Process Control instruments for flow, pressure, level and temperature using electronic, pneumatic, hydraulic and water medium.

Work assist to compressors and turbine maintenance in removing re-installation and validation of vibration probes, RTD, TC, transmitters and control valves.

Instrument calibration, simulation and loop check, both Hart and Field Bus protocol involving electronic, pneumatic, and hydraulic medium.

Perform functional loop checking of different kinds of process instruments such as control valves, transmitters, thermocouples using Hart Communicator Drack.

Perform loop checking and loop simulation on various process control instrument to ensure the correct tagging, ranges, and alarm trip setting.

Performing dynamic commissioning at (HPU) hydraulic pump unit, to be used for stroking of hydraulic valves,

Performing commissioning of all system at ballast column area from port aft/port forward/starboard aft/and starboard forward.

Performing I/O checks to confirm all signals are correct base on the parameters range and set points.

Performing/ commissioning of motor loops for pumps with coordination to electrical and to barge control room (BCR)

Performing cold checks for instrument cable signal base on loop diagram (ILD) and made the as built if require

Performing cause and effects with coordination to barge control room (BCR)

Performing commissioning loop checks, I/O checks for THRUSTER SYSTEM

Performing Pre Commissioning, Commissioning Activities and Functional Test in HULL utility area well head, top deck, fresh water system, MGO diesel pump skid w/ Coordination to the Panel Operator in Central Control Room (CCR) To Monitor the Condition/Status of All Instruments and control valve, on and off valve in the Field during Functional Testing.

Employment History:

SPIE OIL AND GAS Services Middle East L.L.C

SBM OFFSHORE Single Bouy Mooring Inc.

ODEBRECHT / TDS-2000 Semi-Submersible Drilling Rig Project (Onshore/Offshore)

Abu Dhabi, UAE

July 1, 2010 to March 11,2011

Instrument Commissioning Technician

Duties and Responsibilities:

Pre- Commissioning and Commissioning includes Loop Checking and Functional Check of field instrument such as Pressure Transmitter, Temperature Transmitter, Level Transmitter, Flow Transmitter, Actuated Control Valves, On/Off Valves ( ESDV, SDV and MOV), and Switches prior for system hand over with respect to Commissioning Procedures.

Performing dynamic commissioning at (HPU) hydraulic pump unit, to be used for stroking of hydraulic valves,

Performing commissioning of all system at ballast column area from port aft/port forward/starboard aft/and starboard forward.

Performing I/O checks to confirm all signals are correct base on the parameters range and set points.

Performing/ commissioning of motor loops for pumps with coordination to electrical and to barge control room (BCR)

Performing cold checks for instrument cable signal base on loop diagram (ILD) and made the as built if require

Performing cause and effects with coordination to barge control room (BCR)

Performing commissioning loop checks, I/O checks for THRUSTER SYSTEM

Performing Pre Commissioning, Commissioning Activities and Functional Test

in HULL utility area well head, top deck, fresh water system, MGO diesel pump skid w/ Coordination to the Panel Operator in Central Control Room (CCR) To Monitor the Condition/Status of All Instruments and control valve, on and off valve in the Field during Functional Testing Performing Loop Checking Of Process Instrument in the Field Including Motor Loops to the as Per Supervisor Schedule

Activation and Functional Check/Test of Instrument within the Package Auxiliary Skid for Final Acceptance like lube oil pump skid, gas compressor

Assisted to the vendor for commissioning of Hydraulic power unit (HPU) system,

Assisted to the vendor for commissioning of high integrity pressure protection system (HIPPS)

Performing Calibration on transmitters and control valve

Performing by passing of all control valve and on and off valve for test package nitrogen helium test as per Operation team.

Employment History:

Total Gas France

Total Gas Yemen Liquified Natural Gas Project (YLNG)

MPH Consulting Services Limited

Bal-Haf, Yemen

May 1,2009 to Oct.6,2009

Instrument Commissioning Technician

Duties and Responsibilities:

Over all incharge for the Commissioning and Start up of Instrumentation and Automation DCS, To ensure that the System Commissioning Integrity Test (SCIT) are efficiently executed to an acceptable standards.

Witness the pre loop and final loop test in field instruments, logic test in progress and ESD systems. To ensure that all parameters and functions are completed based on the narrative reports / sequence logic of the system design.

Perform loop checking, commissioning, functional testing and start up of MR & PMR compressor. Assist to the vendor of Pignone General Electric and GTC Gas Turbine Generator

Preparing loop folders package documents such as ILD, P&ID, calibration forms, data sheet, cause and effects, FTS Functional Test Sheet forms.

Functional testing of Gas Turbine Generator, End-Flush Compressor, Process area liquifaction unit and cryogenic unit) taking in consideration their inter locking

Device and protection system involved in its operations.

Perform loop test verifies transmitters output loop integrity, and operation of any records or similar devices installed in the loop.

Loop test valve, input the parameters and input the informations to the set up wizards auto calibration, check the step responce and partial stroking test.

Configuration and calibration and measure signal output of field side instruments like PDIT, PDT, FDIT, FT, PT (RTD) Fire and Gas system

Employment History:

Technip Ras Laffan Olefins Project

Ipedex Production LLC

Ras Laffan Industrial City, State of Qatar

Feb.1,2009 to April 24,2009

Lead Instrument Technician

Duties and Responsibilities:

Supervising and Leading Instrument Technicians in the execution of Pre-Commissioning and Commissioning activities.

Preparation of Permits for the job to be carried out and Lead Toolbox talk about the task and safety and to ensure that PTW guidelines and limitations are properly implemented.

Coordinating with the vendor engineers for their assistance and support for the Pre-Commissioning and Commissioning of their respective skids/activities.

Simulations and Functional testing of signals for DI/DO from Electrical Switchboard MCC for Motor Control including ESD to ensure signals is in accordance to the DCS.

Calibration, Troubleshooting, Rectication and Functional Test of Pressure and Flow Control Valve, Hydraulic Valve, Shut Down Valve, Blow Down Valve, Antisurge Valve and On/Off Valve for DI/DO including ESD to ensure the signal is in accordance to the DCS and set the Instrument air working pressure as required.

Monitoring of daily progress report, attending general meetings and preparation of work packages and documentation with regards to ITR’s for necessary attachments.

Commissioning and Calibration of Instrument Process Transmitter for any controlled process variables such as Pressure, Temperature, Flow, and Level.

Assigned in walk down inspections of different kinds of field instruments such as transmitters, control valves, thermocouples, to verify that all terminations are correct as per instrument loop diagrams (ILD) Location of instruments as per P&ID in Furmace area.

Perform Loop checking of different kinds of field instruments using Hart communicator, druck as witness by the RLOC maintenance.

Conducting trouble shoot and valve stroking, valve timing and verifying alarms in DCS.

Function Integrated test of different kinds of process instruments, Pre comm. / Commissioning and Start up.

Employment History:

Coral Bay Nickel Corporation (CBNC)

Japan Gas Corporation ( JGC Philippines )

Rio Tuba, Palawan

July 1, 2008 to December 21, 2008

Commissioning Supervisor

Duties and Responsibilities:

In-charge in Pre- comm / Commissioning work activities.

Function test of control valve positioner,valve stroking,timing for verification of alarms in DCS.

Final inspection of control panels,marshalling cabinets,prior to energized.

Supervised and conduct function test of Demin Water, Sand Filter and Air compressor as witness by the CBNC representative in utility area.

Reporting and attending daily meeting with the head supervisors and commissioning manager.

Supervising and Leading Instrument Technicians in the execution of Pre-Commissioning and Commissioning activities.

Preparation of Permits for the job to be carried out and Lead Toolbox talk about the task and safety and to ensure that PTW guidelines and limitations are properly implemented.

Coordinating with the vendor engineers for their assistance and support for the Pre-Commissioning and Commissioning of their respective skids/activities.

Simulations and Functional testing of signals for DI/DO from Electrical Switchboard MCC for Motor Control including ESD to ensure signals is in accordance to the DCS.

Calibration, Troubleshooting, Rectication and Functional Test of Pressure and Flow Control Valve, Hydraulic Valve, Shut Down Valve, Blow Down Valve, Antisurge Valve and On/Off Valve for DI/DO including ESD to ensure the signal is in accordance to the DCS and set the Instrument air working pressure as required.

Monitoring of daily progress report, attending general meetings and preparation of work packages and documentation with regards to ITR’s for necessary attachments.

Employment History:

South Pars Development Phases 6, 7 & 8 Gas Refinery Project

Joint Venture of TEC/IDRO/JGC/DIC (TIJD JV)

Assaluyeh, Province of Busher, Islamic Republic of Iran

May 20, 2007 to April 30, 2008

Commissioning Supervisor

Duties and Responsibilities:

Conduct daily tool box meeting, safety awaireness, and instruction to the employee.

Supervised the installation of support for steam line, instrument air, plant air.

Supervised the leak testing for plant air and instrument airlines, potable water, nitrogen line.

Reporting and preparing look ahead work schedule as priorities.

Supervising and Leading Instrument Technicians in the execution of Pre-Commissioning and Commissioning activities.

Preparation of Permits for the job to be carried out and Lead Toolbox talk about the task and safety and to ensure that PTW guidelines and limitations are properly implemented.

Coordinating with the vendor engineers for their assistance and support for the Pre-Commissioning and Commissioning of their respective skids/activities.

Simulations and Functional testing of signals for DI/DO from Electrical Switchboard MCC for Motor Control including ESD to ensure signals is in accordance to the DCS.

Calibration, Troubleshooting, Rectication and Functional Test of Pressure and Flow Control Valve, Hydraulic Valve, Shut Down Valve, Blow Down Valve, Antisurge Valve and On/Off Valve for DI/DO including ESD to ensure the signal is in accordance to the DCS and set the Instrument air working pressure as required.

Monitoring of daily progress report, attending general meetings and preparation of work packages and documentation with regards to ITR’s for necessary attachments.

Employment History:

Deep Water Gunazli – Drilling Utility Quarters (DWG-DUQ)

J. Ray Mc Dermott Caspian Contractors, Inc (MCCI)

Rotary Electrical Company (PTE) Ltd.

Baku, Azerbaijan Russia

July 26, 2006 to March 8, 2007

Electrical / Instrument Technician

Duties and Responsibilities:

Incharge for the Calibration and trouble shooting of online and offline measuring

instrument and control system.

Loop checking of all kinds of instruments from field to DCS. Trouble shoot all discipline abnormalities in the plant and report result to superior

Pre-commissioning/commissioning, logic testing, functional testing of different process instrument from field to DCS confirmation of feedback / status in respect to instrument process flow specification and instrument loop diagrams.

Calibration/configuration and trouble shooting of instrument such as transmitter

(by Rosemount) control value, Calibration / stroking (by Valtek, Masonelain) positioner

(by logix 1100, 1200, 3200).

Installation of vibration probe as per data sheet, data specification setting using wobolator

Loop checking of fire and gas detector. Rectify problems with minimum supervision, pertaining instrument and control.

Analyze instrument error code and other discrepancy reading, conduct routine inspection

and monitoring gathered instrument especially those frequent giving problems.

Assist operation during start-up.

Ensure that all instrument assets in the area are maintain safe, efficient and cost effective manner, according to agreed maintenance philosophies, procedures and practices and HSE methods, PTW, HSE case, company safety.

Employment History:

Korean Power Plant And Engineering Corporation (KPS)

1200 MW Power Plant Combined Cycle

Ilijan, Batangas City, Philippines 4200

March 6, 2006 to April 1, 2006 ( Shutdown)

Instrument Technician

Duties and Responsibilities:

Incharge in the modification of junction box, cable tray and its supports.

Replacing defective pressure gauge,transmitters,thermocouples.

Overhauling, repair,assemble and function test of control valve.

Functional loop checking of diffirent kinds of field instruments, switches, thermocouples,transmitters etc.

Replacing cable trays to the turbine area and dressing the cables.

Assist in plant operators for plant start up.

Perform functional loop checking of different kinds of process instruments such as control valves, transmitters, thermocouples using Hart Communicator, Druck hand pump.

Perform loop checking and loop simulation on various process control instrument to ensure the correct tagging, ranges, and alarm trip setting.

Verify all the signals from field devices are correct to the DCS.

Employment History:

West Azeri and East Azeri Production Drilling Quarters

J. Ray Mc Dermott Caspian Contractors Inc. (MCCI)

Rotary Electrical Company (PTE) Ltd.

Baku, Azerbaijan Russia

February 17, 2005 to October 13, 2005

Electrical / Instrument Technician

Duties and Responsibilities:

Over all incharge for the Installation of diff. kinds of field device, such as transmitters, Gauges, Fire and Gas Devices, PAGA systems, welding sockets, at Drilling Equipment Set (DES)

Cable glanding, dressing, and termination of instrument cables based in cable schedule.

Conducting loop checking of instrument cables from field instruments to junction box, and from junction box to marshalling panels.

Punchlist clearing for vendor skid in Glycol Regeneration package, Inert Gas, Rolce royce Gas Turbines and Sand Separators.

Assigned in DSM for the installation of lighting fixtures, meggering

Coordinating with the vendor engineers for their assistance and support for the loop checking of their respective skids/activities.

Simulations and Functional testing of signals for DI/DO from Electrical Switchboard MCC for Motor Control including ESD to ensure signals is in accordance to the DCS.

Calibration, Troubleshooting, Rectication and Functional Test of Pressure and Flow Control Valve, Hydraulic Valve, Shut Down Valve, Blow Down Valve, Antisurge Valve and On/Off Valve for DI/DO including ESD to ensure the signal is in accordance to the DCS and set the Instrument air working pressure as required.

Monitoring of daily progress report, attending general meetings and preparation of work packages and documentation with regards to ITR’s for necessary attachments.

Employment History:

JGC / KBR Joint Venture (JK) (TEG)(REG)(KRECHBA)

In-Salah Gas Plant Project

In-Salah, Algeria

Aug. 28, 2003 to July 1, 2004

Instrument Commissioning Technician

Duties and Responsibilities:

Preparing loop folders such as ILD, P& ID, Calibration Forms, Data Sheet, Cause and Effects, Cable Installation, for the prepartion of function test and loop checking activities.

Functional test of control valve positioner ( masoneilan) shut down valves, blow down valve, transmitters using hart communicators, Yokogawa simulator.

Perform Loop checking of pressure,level, flow and temperature transmitters.

Assist in fire and gas vendors for function test of smoke and gas detectors, flame detectors in Rolce Royce Gas Turbines.

Installation of process instruments like transmitters, switches, transducers, gauges, thermocouples.

Cable glanding, Dressing and termination of instruments cables.

Assigned in Well Head Gas Gathering area which is composed of 10 well pads, installation of supports for cable tray, tubing, explosive proof junction box, SSv control panels.

Loop checking of instrument cables from field instruments to control panels.

Punchlist clearing for the preparation of mechanical completion.

Employment History:

JG Summit Petrochemicals Corporation

M4 Construction and Maintenance Services

Brgy. Simlong, Batangas City Philippines 4200

December 17, 2002 to April 5,2003 ( Shutdown)

Instrument Technician

Duties and Responsibilities:

Assigned in all around instrument works such as check and disconnect of all defective instruments.

Overhauling, repair, function testing of control valves positioner.

Greasing of control valve such as SDV, BDV and all other control valves with grease fittings.

On site validation/ calibration PT, FT, LT and TT.

Perform valve stroking to verify the signals going to DCS as indicate the correct feed back from the field.

Inspection of junction box, control panels, replacing busted bulbs.

Assist and carries out loop checking, calibration of all process instruments such as pressure, level, flow, temperature transmitters,switches, thermocouples. replacing damage pressure gauges.

Perform and verification of all the signals and correct reading of field devices in DCS.

Assist in field operators and maintenance technician for plant start-up

Employment History:

Obigboo Node Associated Gas Gathering Projects

Dresser Kellogg Energy Services

Km. 16 Aba Road, Portharcourt Nigeria

April 25, 2001 to September 25, 2001

Instrument Technician

Duties and Responsibilities:

Installation of different kinds of process instruments including supports for



Contact this candidate