Analyn Mangilin Cunamay
Blk * Lot ** Phase * Deca Clark Residence
Brgy. Margot, Angeles, Pampanga, Philippines 2009
Mobile No.: 094********
Email Add: ac3ite@r.postjobfree.com
Current Location: Philippines
Availability: I can start for work as soon as possible.
PERSONAL DATA
Age:
35
Date of Birth:
May 1, 1981
Gender:
Female
Civil Status:
Married
Height:
160.06 cm
Weight:
50 kg
Nationality:
Filipino
Religion:
Christianity - Catholic
Permanent Address:
Blk 9 Lot 68 Phase 1 Deca Clark Residence Brgy. Margot, Angeles
Pampanga, Philippines 2009
WORK EXPERIENCE
I have been working for 16.0 year(s).
1.
Position:
QC/QA Engineer Supervisor/QMR/QA Internal Auditor (ISO 9001:2015)
Duration:
Apr 2013 – Aug 2016 (3.3 yrs)
Company:
MEISEI ELECTRIC PHILIPPINES CORPORATION
Company Industry:
Electronics & Semiconductors
Location
J.A Santos Ave., Clark Freeport Zone, Clark Field, Pampanga
Department:
QC/QA
Job Description:
QC/QA Engineer Supervisor Duties and Responsibilities: Supervises the development, implementation and maintenance of quality control system and activities. Provides guidance to inspectors and supervises the work group. Responsible for regulatory inspections and findings including all follow up. Monitors and evaluates performance of subordinates. Recommends developmental activities and disciplinary actions if necessary. Assures that products, processes, facilities and systems conform to quality standards and governmental regulations. Assist in managing incoming, in-process and final quality inspection. Conducts internal audits to ensure both quality and standards compliance exceed expectations. Reviews and approves operating procedures in Production and Quality Control departments. Assists in investigating and resolving all customer complaints and internal non-conformance including the determination of sufficient corrective and preventive actions. Assists in conducting supplier performance evaluation and come up with corrective actions and continuous improvement plans to ensure suppliers meet required quality standards. Assists in providing guidance to the assembly department regarding quality issues and provides cross training on quality. Sets the environmental objectives and targets, action plans and resource requirements to meet the environmental requirements of Quality Assurance Department. Ensures implementation of environmental standards of product. Participates in management reviews and internal audit. Ensures that corrective and preventive actions are provided, implemented, monitored and evaluated.
2.
Position:
QC/QA Senior Staff/Calibration Staff/ROHS Secretariat/QA Internal Auditor/IE Secretariat
Duration:
Aug 2002 - Apr 2012 (9.7 yrs)
Company:
ICHINOMIYA ELECTRONICS PHILIPPINES CORPORATION
Company Industry:
Electronics & Semiconductors
Location
128 East Main Ave.SEPZ Laguna Technopark, Binan, Laguna
Department:
QC/QA
Job Description:
QC/QA SENIOR STAFF Duties and Responsibilities: Ensure team compliance to standard operating procedures and process flow. Ensure completeness of the manpower complement on assigned line / area. Resolve interpersonal problems among inspectors in order to sustain their morale and maintain harmonious working relationship. Responsible for providing failure analysis support to assemble and test operators. Responsible for handling customer complaints regarding quality issues. Evaluates each process in order to improve quality as well as productivity. Deal with customers if necessary. Verify defective products if have a customer complain. Awareness and update on Quality Standard Visual Criteria. Prepare training records of QC inspectors and sub-leaders. Give a qualification exam to QC inspectors and sub-leaders. Qualify new QC inspectors for certain process. Practice 3Q6S and conduct patrolling within the company premises. Empower line leaders through continuous communication and open discussions. Established and implement work instruction and standard. Present and advice for countermeasure. Established Preventive and Corrective Action for non-conformity. Ensure that quality standards are implemented for product quality improvement in all section. Process, prepares and issues inspection data for internal and external submission including FA samples. Provide product inspection plan for references of incoming raw materials and outgoing finished products requirements. Prepare and provide all QC related documents and datasheets. Recommends Qc section's project and program. Implement section objective. Recommend line stoppage if necessary especially when quality problems arises and that product requirements will be affected. Conduct meeting to all Qc inspectors and subordinates. Perform assigned related task from time to time. Perform ISO related activity Plans, review, evaluate and update the effectiveness of sampling plans in terms of quality and productivity. Conduct in-house product failure analysis, quality system training, product functional test and job inspection when needed. Monitor line performance and motivate operators to improve and develop their skills and capability. Educate and motivate operators about quality. Supervise Sub-leaders and inspectors. Responsible for calibration of measuring and testing equipments inside the company. Inform and report all untoward, incidents, problems, at QC area. Practice 3Q6S within the company premises. Perform Internal and Supplier Quality Audits as required by ISO 9001:2008 version.
CALIBRATION STAFF Duties and Responsibilities: Assigned to monitor all measuring tools and equipments. Responsible for the in-house calibration of all measuring tools and equipments and sends all Reference Standards and measuring equipments for external calibration. Dependable for the incoming and registration of newly conveyed measuring tools and equipments. Keep track on the inventory of all measuring tools and equipments. Computation of Uncertainty of measurements for calibrated equipments. Keep hold of defective measuring tools and equipments. Measures products and materials using Vision Measuring Machine (Quick scope). Conducts orientation on the handling and proper maintenance of measuring tools and equipments. Transact with suppliers for the purchasing of measuring equipments. Verifies accuracy of slope height gauge, plug gauge and ring gauges that are being used in production. Prepares / provide documents in relation to calibration. Regular surveillance on the location of measuring equipments in production areas. Practice implemented work instruction, procedures and standards. Issuance of Corrective and Preventive Action Request for defective tools and equipments.
ROHS SECRETARIAT Duties and Responsibilities: Make documents related to ROHS as requested by Customer. Provide and prepare Technical Analysis Report, ICP data, Guaranteed Letter, List of Chemical use in the process of the product. Request to supplier the MSDS and ICP data of raw materials. Perform Orientation to all newly hired employees regarding ROHS and the 6 Banned Substances.
3.
Position:
QC/QA Inspector
Duration:
Aug 1999 - Aug 2002 (3 yrs)
Company:
SYNERTRONIX INCORPORATION
Company Industry:
Electronics & Semiconductors
Location
Calamba City, Laguna, Philippines
Department:
QC/QA
Job Description:
Responsibility is to control/prevent occurrence of defective parts by means of visual inspection and performing incoming inspection to all raw materials of Synertronix. Conduct dimensional check in all incoming raw materials and outgoing products for delivery / shipment. Make incoming report and visual inspection result.
EDUCATION
Highest Education
Second Highest Education
Education Level:
College Level
Vocational Diploma / Short Course Certificate
Education Field:
Education/Teaching/Training
Engineering (Electrical/Electronic)
Course:
Education
Electronics Vocational Course
School/University:
Laguna College Of Business And Arts
Community Electronics Learning
Location:
Calamba, Laguna
Punta National High School Calamba, Laguna, Philippines
Date:
Mar 1999
Feb 1995
LICENSES/CERTIFICATIONS
License/
Certification
License/
Certification No.
Date
1.
Driver License
D14-08-002488
May 23, 2014
2.
SGS Certificate for ISO 17025 2005 General Requirements for the Competence of Testing and Calibration Laboratories Internal Audit Course
12297416
May 2, 2012
SKILLS
Skill
Yrs of Experience
Remarks
1.
Can Able to Drive
5
Can Drive Four wheels Manual or Automatic Transmission. Can Drive motorcycle but limited only (small type).
2.
Quality Control/Quality Assurance
& Computer Literate
12
Knowledgeable in Statistical Process Control, Failure Mode Effect Analysis, 8D Report for Corrective and Preventive Action, Computer Literate, Certified Internal Calibration Officer for Length, Industrial and Electrical Equipment, Know how to assemble Electronic Equipment like PCB, IC, Plastic Stiffener, and Rim Sheet, Usage of Production Measuring Tools and Clean room Equipment, Certified Internal Quality Auditor, Process Qualification especially for new models and knowledgeable in Manufacturing Stator and Spindle Motor.
TRAININGS/SEMINARS
Date
Feb 15, 2016 –
Feb 16, 2016
Oct 10, 2015
Topic/Course Title
ISO 9001:2015 version for Quality Internal Audit
Mr. Adarne Crispo
Angeles Inspection Body (AIB)
ISO 9001:2015 version Awareness (Quality Management System)
Mr. Adarne Crispo
Angeles Inspection Body (AIB)
Oct 28, 2011-
Oct 29, 2011
Verification of Common Laboratory Instruments
Engr. Rodnel O. Tamayo
Metal Industry Research and Development Center Bicutan, Taguig, Metro Manila
Jul 2, 2011-
Jul 3, 2011
Refresh Course for Uncertainty Computation
Engr. Rodnel O. Tamayo / Engr. Rommel N. Corona
Sonju Engineering Laboratory at Binan, Laguna
May 14, 2011-
May 21, 2011
Refresh Course for Calibration of Electrical Equipments
Engr. Rodnel O. Tamayo
Sonju Engineering Laboratory at Binan, Laguna
Feb 11, 2011
Work Attitude Values Enhancement
Ms. Marianne Rodrigo
Ichinomiya Electronics Philippines Corporation Laguna Technopark, Binan, Laguna
Nov 11, 2010-
Nov 12, 2010
Refresh Course in Calibration Training
Mr. Gerard A. Cruz
Applied Calibration and Instrumentation System Inc. Unit 201 IHC Bldg. #7 Bagong Anyo St. Brgy. Sta Lucia 1608 Pasig City Philippines
Jun 10, 2006-
Jun 8, 2007
Japan training
Mr. Taizo Akita
IME DENKI JAPAN
Mar 27, 2006
Fire Safety Seminar
Mr. Romel Acutim
Ichinomiya Electronics Philippines Corporation Laguna Technopark, Binan, Laguna
Dec 19, 2005-
Dec 22, 2005
Seminar for Vision Measuring Machine
Mr. Marlon D. Felix and Mr. Raul I. Millena
Ichinomiya Electronics Philippines Corporation in Laguna Technopark, Binan, Laguna
Oct 28, 2005-
Oct 30, 2005
Seminar Program on Fire Safety and Awareness
Mr. Ramir Celebre
Ichinomiya Electronics Philippines Corporation Laguna Technopark, Binan, Laguna
Apr 28, 2005-
Apr 30, 2005
Seminar ISO 9001 & 14001
Mr. Modesto Q. Lopez Jr.
Ichinomiya Electronics Philippines Corporation Laguna Technopark, Binan, Laguna
Oct 21, 2004-
Oct 22, 2004
Calibration on Electrical Measurement
Mr. Steven Gatchalian and Mr. Tito Tanchoco
Ichinomiya Electronics Phils. Corp. Laguna Technopark, Binan, Laguna
Sep 2, 2004-
Sep 3, 2004
Calibration on Industrial Measurement
Mr. Rolando T. Viloria, CESO III
Metal Industry Research and Development Center at Bicutan, Taguig, Metro Manila, Philippines
Aug 27, 2004-
Aug 28, 2004
Computation of Uncertainty Measurement
N.K. Laboratories Inc. No.36 Meralco Ave., Oranbo,Pasig City,Philippines
Mr. Hiroshi Nishijima
Jul 28, 2004-
Jul 29, 2004
Seminar for Supervision
Ms. Ma. Theresa P. Salandanan
Ichinomiya Electronics Philippines Corporation Laguna Technopark, Binan, Laguna
Jun 24, 2004
People Effectiveness Program
Ms. Ma. Theresa P. Salandanan
Ichinomiya Electronics Philippines Corporation Laguna Technopark, Binan, Laguna
May 28, 2004-
May 29, 2004
Calibration on Length Measurement
Mr. Hiroshi Nishijima
N.K. Laboratories Inc. No.36 Meralco Ave.Oranbo,Pasig City,Philippines
LANGUAGES SPOKEN
Language
Proficiency Level
(5=Excellent; 1=Poor)
1.
English
4
2.
Japanese
3
AVAILABLE DOCUMENTS
Passport
Number:
SC0681352
Expiry Date:
Aug 2, 2019
Place of Issue:
Angeles, Pampanga
Date of Issue:
Aug 2, 2014
NBI
Number:
0011493
Expiry Date:
Nov 14, 2015
Type:
Abroad
REFERENCES
Mrs. Beth Pallasigue
DSWD Officer
Angeles Municipality Office
Tel.No.: 094********
Mr. Hiroshi Takiguchi
General Manager
MEPC
Tel.No.: 091********
Email: ac3ite@r.postjobfree.com