Quality Assurance
Resume:
Ferdinand Z. Cruz
Bagong Silang Caloocan City.
Mobile #: +639*********
ac3ggl@r.postjobfree.com
WORK
EXPERIENCE
Omnipack Industrial Corporation
Member: REBISCO GROUP of COMPANIES
Lots 2&3 Deparo Road, Bagumbong, Caloocan City
Tel No.: 938-3558; 938-3570, Fax No.; 985-0161
SR. QUALITY ANALYST / LINE INSPECTOR
July 2016 to May 2017
Quality Control / Research & Development Department
LINE AND FINISHED GOODS QUALITY INSPECTION - Supervise line and finished goods quality inspection of subordinates. Implement all standard operating procedure on quality assurance for the following product elements: colour, appearance, dimension, functional characteristic, solvent retention, machine parameter, process condition and raw material used.
PRODUCTION LINE MONITORING - Monitor production line status and activities by checking production reports and quality inspection reports.
TROUBLESHOOTING AND INVESTIGATION - Lead investigations on quality issues (i.e. defects, line rejection, waste, safety issues) by making root cause analysis/fault-tree analysis, scrutiny of production and inspection reports and analysis of other circumstantial evidence. Coordinate action plans, corrective and preventive actions with production department and recommend best solution.
DEVELOP QUALITY ASSURANCE PROCEDURE - Define and develop quality assurance practices and procedures, test plans and other QA assessments for new development based from product technical specification.
QUALITY ASSURANCE PROCEDURE REVIEW - Regularly review, revise and verify quality assurance standards as needed on a yearly basis. Ensure that testing procedures still allow product to meet food safety requirements, fulfil outmost functionality and satisfy end-user requirements. Prepare and deliver reports, recommendations, or alternatives that addresses improvement or potential quality and food safety related problems.
MANPOWER EVALUATION AND TRAINING - Evaluate personnel according to their performance and suggest training that could help develop their skills and competencies and strengthen their weaknesses.
MANPOWER SCHEDULING - Provide accurate manpower scheduling for subordinates based on production scheduling and output.
Responsible in the Quality Control activities and ensuring the implementation of the Quality Management System in the Technical Department.
Participate as a Team Member/Leader in developing and implementing Organization-Wide Policies and Programs that will contribute to its overall success.
Horizon Contracting Company & IT
Riyadh Quda-Eastern Ring Exit 11
P.O. Box: 40267 Zip: 11499
Phone: 4977779
Saudi Arabian National Guard (SANG)
Al-Hassa Project, KSA
DOCUMENT CONTROLLER
May 2015 to May 2016
Quality Control / Electrical Engineering Department
Particular experience in development and implementation of management information systems, internal control systems, project management procedures and related information.
Establish and manage effectively the document control planning system to support project development.
Responsible for the management of document numbering, coding system and revision level.
Maintain and update registry of all design and e-filings of project documentation with reliable audit trail.
Overseeing and coordinating the day to day running of projects by assisting Department Head, Site Engineers, Supervisors, Foreman and direct reporting to Engineering Manager.
Validate, update MDR and emphatically segregate project deliverables and comprehensively disseminate (updated information) to all concern.
Omnipack Industrial Corporation
Member: REBISCO GROUP of COMPANIES
Lots 2&3 Deparo Road, Bagumbong Caloocan City
Tel No.: 938-3558; 938-3570, Fax No.; 985-0161
SR. QUALITY ANALYST / LINE INSPECTOR
Aug. 2008 to May 2015
Quality Control / Research & Development Department
LINE AND FINISHED GOODS QUALITY INSPECTION - Supervise line and finished goods quality inspection of subordinates. Implement all standard operating procedure on quality assurance for the following product elements: colour, appearance, dimension, functional characteristic, solvent retention, machine parameter, process condition and raw material used.
PRODUCTION LINE MONITORING - Monitor production line status and activities by checking production reports and quality inspection reports.
TROUBLESHOOTING AND INVESTIGATION - Lead investigations on quality issues (i.e. defects, line rejection, waste, safety issues) by making root cause analysis/fault-tree analysis, scrutiny of production and inspection reports and analysis of other circumstantial evidence. Coordinate action plans, corrective and preventive actions with production department and recommend best solution.
NON-CONFORMING PRODUCT SAFEGUARDING - Ensure that non-conforming products are properly held, identified and isolated.
REWORK VALIDATION – Countercheck inspection of the product underwent rework based from stipulated rework procedure.
DEVELOP QUALITY ASSURANCE PROCEDURE - Define and develop quality assurance practices and procedures, test plans and other QA assessments for new development based from product technical specification.
QUALITY ASSURANCE PROCEDURE REVIEW - Regularly review, revise and verify quality assurance standards as needed on a yearly basis. Ensure that testing procedures still allow product to meet food safety requirements, fulfil outmost functionality and satisfy end-user requirements. Prepare and deliver reports, recommendations, or alternatives that addresses improvement or potential quality and food safety related problems.
MANPOWER EVALUATION AND TRAINING - Evaluate personnel according to their performance and suggest training that could help develop their skills and competencies and strengthen their weaknesses.
INTERNAL QUALITY AUDITS - Conduct Internal Quality Audit to other departments pursuant to the standards stipulated in ISO 9001:2008.
MANPOWER SCHEDULING - Provide accurate manpower scheduling for subordinates based on production scheduling and output.
Responsible in the Quality Control activities and ensuring the implementation of the Quality Management System in the Technical Department.
Participate as a Team Member/Leader in developing and implementing Organization-Wide Policies and Programs that will contribute to its overall success.
Assumes the OIC position in the absence of all supervisors during weekends, holidays and nightshift.
Responsible in the Health and Safety of all people in the workplace and to promote/practice Occupational Health and Safety that prevent injury caused by workplace influences.
JR. RESEARCH & DEVELOPMENT ANALYST
Nov. 2007 to Aug. 2008
Quality Control / Research & Development Department
Responsible for development of raw materials including processing operation before applied for commercial use. Also leads development for new products that will meet new clients requirements:
Roto-Gravure Printing Inks
Adhesives & Primers
Resins, Master Batch, Colorants & Pigments
Solvents and Additives
Films
JR. TECHNICAL SERVICE ENGINEER
Feb. 2007 to Nov. 2007
Quality Control / Research & Development Department
Responsible for development of raw materials including processing operation before applied for commercial use. Also leads development for new products that will meet new clients requirements:
Facilitate validation of rejected products
Handle customer complaints / inquiries
Coordinate with client for the approval of non-conforming products
Coordinate with client on any related/required testing for non-conforming products
Monitor rejections of non-conforming products
JR. QUALITY ANALYST
Jan. 2004 to Feb. 2007
Quality Control / Research & Development Department
Responsible for checking all finished goods that will meet client’s quality requirements before delivery by
Performing rigid and flexible packaging quality test and evaluation
Monitors all in-process materials and machine parameters in the flexible and rigid plastic packaging process.
Prepares regular reports on quality control inspections, assures that all laboratory equipments and apparatus are properly used.
Assumes the OIC position in the absence of all supervisors during weekends, holidays and nightshift.
Coordinate with flexible and rigid production’s supervisors, operators and chief sections about the non conformances encountered during in-line process for immediate actions and preparing the highest recommendation for their troubleshooting.
Quality Control Solution - Investigated and analysed root cause of a recurring defect in production process. Searched and provided evidence of the root cause that contributed to occurrence of the defect. All issues were coordinated with production department in creating corrective and preventive actions for the said defect. Monitored effectiveness of actions taken by obtaining statistics of defect occurrence.
Work Set-up Improvement - Reviewed all components of work set-up and revised old work set-up to increase effectiveness of department’s services. Results were monitored to ensure its effectiveness by administering a survey.
Documentation - Have conceptualized and implemented new formats for reports and other forms according to their respective purposes and current need.
Process Improvement - Have studied how to decrease solvent retention in the product during its processing that affects food odor and taste. New Air intake system of dryers was conceptualized to decrease solvent retention by 30 to 50 percent by proposing additional ducting from outside towards heat exchanger to increase fresh air intake. Proposed set-up was validated for its effectiveness by monitoring solvent retention of printed samples using Gas Chromatography before official implementation.
SEMINARS/
TRAINING
5’s HOUSEKEEPING LEADERSHIP DEV’T PROGRAM INTERNAL QUALITY AUDIT
Omnipack Ind’l Corp. Compound, RBC Group of Companies Training & RBC Group of Companies Training
Lot 2&3, Deparo Road, Bagumbong Conference Center & Conference Center
Caloocan City, Sept. 24, 2005 Jan. 23-24, 2010 August 01, 2009
LISTEN UP & TAKE CHARGE EFFECTIVE ORAL COMMUNICATION & ADVANCE SUPERVISORY
RBC Group of Companies Training PRESENTATION SKILLS TRAINING Omnipack Ind’l Corp.
& Conference Center RBC Group of Companies Training & Lot 2&3, Deparo Road, Bagumbong
April 01-02, 2006 Conference Center. Caloocan City, Jan. 13-14, 2012 February 07, 2010
FIRE SAFETY AND HANDLING GMP/HACCP
Omnipack Ind’l Corp. Omnipack Ind’l Corp.
Lot 2&3, Deparo Road, Bagumbong Lot 2&3, Deparo Road, Bagumbong
Caloocan City Caloocan City
March 3, 2007 Feb. 16-18 & 24, 2011
EDUCATION
College 1996 – 2002 TECHNOLOGICAL INSTITUTE of the PHILIPPINES
938 Aurora Blvd., Cubao, Quezon City
BS in ELECTRONICS & COMMUNICATIONS ENGINEERING
High School 1992 – 1996 BAGONG SILANG HIGH SCHOOL
Ph-3 Bagong Silang Caloocan City
Elementary 1986 – 1992 BAGONG SILANG ELEMENTARY SCHOOL
Ph-1 Bagong Silang Caloocan City
PERSONAL
DATA
Born in Quezon City on September 2, 1979 Married and has two Beautiful Daughter, Filipino Citizenship, Roman Catholic, with Average communication skills, I like to work with different People, Dependable, analytical, hardworking and can easily adapt. Competent and can work under pressure with minimal supervision, Determined to accomplish assigned task, willing to undergo trainings and acquire more skills. Likes to Play Basketball
Age : 37 years old Height : 5’ 9’’
Weight : 83 kg. Languages Spoken : English & Tagalog
Engr. Prince Vincent Y. Ngo
Technical Sales Engineer
HENKEL Philippines Inc.
LSL Bldg. Diode St. LISPP Cabuyao, Laguna
Mr. Hipolito Mañalac III
Maintenance Dept. Supervisor
OMNIPACK Industrial Corporation
Lots 2&3 Deparo Road, Bagumbong, Caloocan City
Engr. Bulanting B. Casan
Facilities Manager
Jones Lang LaSalle Phils. Inc..
Paseo De Roxas, Makati City
.
PERSONAL
DATA
Contact this candidate