Mohammad Sadat Mannan

Mallick Tola Lane, Samanpura, Rajabazar, Patna, Bihar, India +917********* Skype ID: md.sadat.mannan ac3geh@r.postjobfree.com ac3geh@r.postjobfree.com www.linkedin.com/in/mohammadsadatmannan/

Project Manager Lead Engineer - Piping

PMI Certified PMP® and PMI-RMP® with more than 12 years of diverse experience in some of the world’s biggest and most complex multi-billion dollar projects in Oil & Gas industry across different parts of the world; performed under very demanding and challenging safety/ schedules requirement and delivered the project to stakeholder’s expectations; knowledge of cost/ schedule preparation, management of change process, with an organization of high repute in Oil & Gas industry.

Education / Certification

Bachelor of Mechanical Engineering (E.P.C.E.T, Bangalore, V.T.U, Karnataka, India, 2004).

Project Management Professional (PMP)®, (Project Management Institute (PMI), Philadelphia, Pennsylvania, USA, PMP® Number: 2004526).

Risk Management Professional (PMI-RMP)®, (Project Management Institute (PMI), Philadelphia, Pennsylvania, USA, PMI-RMP® Number: 2022705).

Enterprise Project Planning and Management using Primavera ((EPPM), CADD Centre & Synergy School of Project Management, Green Park, New Delhi, India, Student ID: P171005417).

Skills & Abilities

Project Manager Risk Manager

Technical & Professional Skills:

PMP®, Project Management, Benefit Analysis, Communication Management, Project Plan, Quality Assurance, Quality Management, Scope Management, Schedule Management, PMI-RMP®, Risk Management, Project Risk Identification, Risk Analysis, Risk Assessment, Risk Monitoring, Risk Strategy, Stakeholder Engagement, Threat Mitigation etc.

Software Skills:

Primavera P6 Professional R16.2

Standards & Codes:

PMBOK® Guide, Project Risk Management Practice Standard, ISO 17024, ISO 9001 etc.

Lead Engineer -Piping

Technical & Professional Skills:

Piping & Pipeline (Management, Design Engineer & Stress Engineer), Pipe Stress Analysis(Static, Dynamic, Under Ground, wind, seismic, Transportation and Blast Analysis), Piping Materials, Piping Layout, Oil & Gas (Onshore & Offshore), EPC, Detail Engineering, FEED, Calculation etc.

Software Skills:

Caesar-II (Static & Dynamic), AutoCAD, MicroStation, Smart Plant Review, Navisworks, MS Office etc.

Standards & Codes:

Shell (DEPs), SAUDI ARAMCO, ADCO, ADMA-OPCO, ZADCO, BECHTEL, EIL etc...

ASME (B31.1, B31.3, 31.4, 31.8 etc.), API, ANSI, ASTM, WRC 107/297, NEMA, NACE etc.

Profile Summary

Knowledge of the project lifecycle requirements and key components of project management (e.g., scope, time, cost, quality, human resources, communication, risk, stakeholder, procurement and integration) and associated tools, technique and methodologies.

In-depth understanding of project based estimating techniques, resource planning and allocation methods, activity based estimating, budget and cost estimating, WBS development and scope management.

Able to Perform Earn Value Analysis to measure the project performance in terms of cost and schedule.

Effective communication skills (written and verbal), excellent interpersonal skills, negotiation skills to deal with internal/external stakeholders, endowed with strong leadership, analytical, logical, problem solving and conflict management skills.

Provides technical leadership, guidance, support, feedback, coaching, develop, empower, mentoring, training, and expertise to project team.

Works independently, using knowledge of industry and/or professional guidelines and protocols to accomplish goals and objectives and leading others to solve complex problems where significant initiative and independent judgment is required.

Ability to work effectively in virtual environment and direct a diverse project team located in multiple remote offices, site locations around the globe and multiple time zones.

Executed upstream/ downstream, onshore/offshore oil & gas projects successfully in India & Middle East.

Knowledge of supporting and nozzle flexibilities, developing safe and mechanically sound piping routes.

Experience in performing stress analysis for various piping systems such as: fired heater, air cooler, pump/ compressors (centrifugal and reciprocating), turbines, reactors, wellheads, large storage tank, FRP, PSV, high temperature, low temperature cryogenic etc.

Ability to Designs spring hangers, struts, hold downs, expansion joints, special shoes, anchors, guides and special pipe supports.

Work Experience

National Petroleum Construction Company Abu Dhabi, United Arab Emirates

Lead Engineer (Piping Stress) June 2013-April 2016

Duties and Responsibilities:

Performed and checked dynamic spectrum of two & three phase flow lines having Slug/Plug Flow and PSVs along with transportation and blast analysis for offshore platform.

Developed pipe routing & support planning; established pipe support philosophy for lines passing through bridge from platform after incorporating relative displacements of bridge and platform due to wave effects.

Responsible for preparing and managing a schedule for piping engineering activities and deliverables, preparing estimates, preparing scope of services, preparing effort hour forecasts, monitoring changes on the project, preparing change orders, managing the piping engineering budget and schedule, provide progress reporting, coordinate with various disciplines, participate in 3D model reviews.

Monitoring, checking and auditing of stress analyzed systems by junior stress engineers, for the validity of calculations and flexibility analysis.

Function as interface between engineering teams, managements and clients and coordinate with work share offices to ensure piping engineering scope is fully understood, and to ensure quality/ consistency for all deliverables.

Key Projects:

UMM Lulu Full Field Development Project Phase-II, ADMA-OPCO, UAE.

Qusahwirah Full Field Development Unit-Tundish Drain Water System, ADCO, UAE.

Upper Zakum 750K Project P-7511 Subsea Pipeline, Cables, Offshore Structure & Brownfield (EPC-1), ZADCO, UAE.

Triune Energy Services Pvt Ltd New Delhi, India

Senior Engineer - (Piping Stress) May 2008–May 2013

Duties and Responsibilities:

Performed static as well as dynamic stress analysis of two phase lines having Slug/Plug flow connected to exchanger, air fin fan cooler and column along with stress analysis of centrifugal compressor and qualifying the nozzle by NEMA SM23 using Caesar II, checking of pipe routings by using Navis works.

Stress Analysis of Buried Pipelines as per ASME B31.4 & B31.8.

Pipe stress analysis of an 18-inch and above Buried Pipeline at high Pressure (420 Bar and above) and

Temperature 110 C, and stress analysis of a 30-inch and above parallel high pressure steam header from Boilers; with very high temperature (454 C) and pressure (70 kg/cm ).

Coordinates with Process to determine Process data and any special process requirements, and with Civil/Structural groups to ensure loads are being effectively communicated.

Preparing requisitions, technical bid evaluations, and supplier document review for spring supports and expansion joints.

Carry out site survey activities at field to assist the designer to develop 2D Piping GADs and Tie-in isometric drawings for critical lines.

Responsible for establishing base documents, project procedures, standards, specifications to be used for the project and to make team aware of the requirements.

Assisting in the preparation of Man-hour estimation of piping / pipeline design related activities.

Preparing and reviewing engineering studies, design drawings, documents, and material and equipment specifications.

Visit the suppliers' premises to attend kick-off / alignment meetings and clarification meetings.

Participation in milestone model review with client / PMC.

Key Projects:

Capacity Expansion Cum Modernisation Project (Cemp) Phase-II, NHT/CCR Plateforming Unit, BPCL-Kochi Refinery, Ernakulam, Kerala (EIL, India).

Naphtha Hydro Treater Unit & Isomerisation Unit of CPCL, Chennai (EIL, India).

Foroozan Development Operations & Production Enhancement (IOOC, PEDCO, & IOEC, Iran).

HP Parallel Steam Header Line at Mina Al-Ahmadi (MAA) Refinery (KNPC (K.S.C), Kuwait).

Additional Pump for Fuel Oil Supply (Unit-68) To Al Zour Power Station at Mina Al-Ahmadi (MAA) Refinery (KNPC (K.S.C), and (I.S.C.O), Kuwait).

Gas Compression Services for GC-16 and Gas Re-Injection (Safwan Petrolium Technologies Company W.L.L, Minagish, (KOC, Kuwait).

Nitrogen Generation and Injection (NGI) project (ADCO).

Study of Spring Support of Pipelines of Various Process Units in Digboi Refinery (IOCL, Assam Oil Division, India).

Process and Utility Facilities at Top Side and Inside Cavern on EPCC basis for Strategic Storage of Crude Oil Project at Mangalore, Karnataka, India of M/s Indian Strategic Petroleum Reserves Limited (ISPRL).

LP Section Debottlenecking of OHCU at Mathura Refinery, (IOCL, Mathura).

Dahej Sez Pipeline Network Project (Gujarat State Petronet Limited (GSPL), Gujarat, India).

Design, Supply and Installation of Bakhrabad-Siddhirganj gas transmission pipeline, RMSs, and associated facility (Gas Transmission Company Limited, Bangladesh).

Detail Feasibility Report for Capacity Augmentation of Mumbai-Pune-Sholapure Product Pipeline (HPCL, India).

Design, Fabrication & Erection of new Incinerator stacks (2nos) of 110m height at TGTU (unit-24) m Mina Al-Abdullah Refinery (K.N.P.C and Gulf Spic General Trading Company W.I.L)

Replacement/ Installation of Inter-Refinery Transit Pipe Lines (KNPC (K.S.C) and ISCO).

Saudi Arabian Kent Co. Ltd Al-Khobar, Saudi Arabia

Piping Engineer Feb 2007–May 2008

Duties and Responsibilities:

Follow department work instructions and technical guidelines.

Develop and maintain stress critical line List.

Prepares and reviews engineering studies, design drawings, documents, material and equipment specifications, create and maintain all data sheets for process and utility valves and perform wall thickness and branch reinforcing calculations.

Key Projects:

Jubail Export Refinery (JER) Project (SAUDI ARAMCO, Saudi Arabia).

JAC Acetyls Project (SIPCHEM, Saudi Arabia).

Furnace Fabrica (India) Limited Navi Mumbai, India

Piping Engineer Jun 2004–Feb 2007

Duties and Responsibilities:

Prepared piping specification, line sizing, engineering studies, design drawings, documents, material and equipment specifications for piping systems.

Review, analyzes, validate and confirm all assumption, data, conceptual design and all other information related to the feasibility and preliminary conceptual study, initiated preparations of isometric etc.

Preparation of material requisitions and technical bid evaluations, material take- off based on drawings, data- sheets, basic design, standards, pipe specs and material specifications etc..

Key Project:

Sulfuric Acid Plant of Sable Zinc (Zambia)

Affiliation Member Ship Trainings

Member of Project Management Institute (PMI, Philadelphia, Pennsylvania, USA, Member ID: 4635189).

Certificate of Achievement Project Risk Professional (PMI-RMP® Training Course with PDU, Simplilearn, Course Code: XSIMRMPOL2015, Bangalore, India).

Certificate of Achievement Project Management Professional (PMP® Training Course with PDU, Simplilearn, Course Code: SIMOL202009, Bangalore, India).

Personal Effectiveness and Emotional Intelligence Workshop-Myers-Briggs Type Indicator (MBTI, Eton Institute, Abu Dhabi, United Arab Emirates).

Piping Vibration Analysis and Practical Engineering Solution (Haward Technology Middle East, Abu Dhabi, United Arab Emirates).

Vibrating Equipment Seminar (Vibratec, Abu Dhabi, United Arab Emirates).

Passport And Driving License Details

Passport Detail: Z2685752 (Dt. of Expiry: 9thFeb 2024).

Driving License Details:

License No. 2163417

(Dt. of Expiry: 14th April 2024) from UAE

License No. BR-012**********

(Dt. of Expiry: 28th Feb 2021) from India.

Languages Known: English, Arabic, Hindi and Urdu.

Contact this candidate