Resume

Sign in

Engineer Project

Location:
Wylie, Texas, United States
Posted:
January 24, 2018

Contact this candidate

Resume:

*

RESUME

ABRAHAM S. INLONG, PE

P.O. Box ******, Plano, Texas 75025, USA

Email: ac36dt@r.postjobfree.com

Contact No. 469-***-****

WORK SUMMARY

Thirty three (33) years work experience in electrical engineering detailed design & analysis, supervision, project management and construction management for various projects involving electrical power systems, utility power distribution, substations, switchgears, transmission lines, motor control centers, emergency generation systems, electrical control systems, groundings, lightning protection, fire alarms, security alarm systems interface, communication and SCADA systems, uninterruptible power supply, emergency lighting systems, and indoor & outdoor lightings of industrial and commercial facilities. Strongly knowledgeable of low, medium, and high voltage electrical systems. Has broad range of experience in project planning, preliminary and final detailed designs, project management, construction management, power system analysis & engineering studies, power quality studies, analysis & design, commissioning, start-up & testing, project control & monitoring, project proposal preparation, economic studies, cost estimating and specification, procurement, and technical report writing. Twelve (12) years work experience in Saudi Aramco Oil & Gas Projects. Thirteen (13) years work experience in Water and Wastewater Treatment Plant and Pumping Station Projects, and other related facilities. Knowledgeable in SKM Power Tools Software and ETAP for power system analysis, modeling and simulation, load flow, short circuit calculations, power system protective devices and relay coordination, settings, and verifications, arc flash hazard analysis, transient motor starting, and stability studies.

Knowledgeable in the industry codes and standards such as NEC, IEEE, NFPA, NEMA, ANSI, NESC, NETA, API, UL, Saudi Aramco Engineering Standards and Procedures, and other industry standards.

EDUCATION

Sept. 1997 Master of Science in Electrical Engineering with specialization in Power and Control

Georgia Institute of Technology

Atlanta, Georgia, U.S.A.

Nov. 1981 Bachelor of Science in Electrical Engineering Mapua Institute of Technology, Philippines

PROJECT MANAGEMENT COURSE

Spring 2008 Project Management Certificate Program University of Texas Arlington, Texas, U.S.A

NATIONALITY

US Citizen/American

2

PROFESSIONAL EXPERIENCE

December 2008 to August 2017

Saudi Aramco (Saudi Arabian Oil Company)

Ras Tanura, Saudi Arabia

Lead Project Engineer- Electrical

Supervise and perform design & analysis, and Quality Assurance & Quality Control of multiples Oil & Gas capital projects during Project Proposal (PP), Contract Procurement, Detailed Design, Construction, Testing & Commissioning, and Closeout. Responsibilities include the preparation of budgets, cost, scheduling, resources, GES Service Order for Project Proposal development, preparation of Contracting Plan & Contract Development, preparation of Detail Design Packages and manage/supervise the Construction phases including Project Cost and Schedule, and coordinate with all project stakeholders. Prepares engineering analysis, design, calculation, life-cycle cost and equipment selection. Provide assistance to senior level engineers or project manager. Supports company safety programs and initiatives by following all EHS and operating procedures and adhering to established design standards. Provides periodic reports to the Project Manager. Mentor the junior engineer. Knowledgeable and comply with Saudi Aramco Engineering Standards, Saudi Aramco Engineering Procedures, NEC, IEEE, NFPA, NEMA, ANSI, NESC, NETA, API, UL, and other related/applicable industry standards.

July 2008 to December 2008

Chicago Bridge & Iron (CB&I) Inc.

Richardson, Texas, U.S.A.

Senior Project Engineer

Responsible for engineering design, preparation of technical specifications and signing

& stamping of all electrical design packages and technical specifications of Sulfur Plant. Supervise and coordinate with the Engineering and Design Leads on assigned project. Responsible for the execution of engineering deliverables including the engineering schedule, budget, document controls, and manpower staffing. Responsible for cost, schedule, quantity, and budget control. Establish project procedures to ensure deliverables. Reviews work with client, management, and project leads. Identifies problems and coordinates with the engineering team for resolutions. Provides periodic reports to the Project Manager. Comply with National Electrical Code (NEC), IEEE & ANSI Standards, and other related/applicable industry standards.

July 2007 to May 2008

Siemens Energy and Automation, Inc

Arlington, Texas, U.S.A.

Principal Systems Engineer

Responsible for design of power distribution, safety systems, and testing of Switch Network, Delivery Bar Code Sorters (DBCS-7) power feeder, and main power distribution unit (MPDU). Perform system analysis and troubleshooting. Coordinate the 3

projects with senior project manager and other disciplines. Prepare technical documents and specifications. Prepare bid document and bill of materials. Conduct or attend peer review technical meeting. Provide technical expertise and support to other engineers. Develop plan and schedule using MS Project. Prepare weekly group status report. Comply with National Electrical Code (NEC), IEEE & ANSI Standards, NFPA, and other related/applicable industry standards.

August 2004 to May 2007

Chiang, Patel and Yerby, Inc.

Dallas, Texas, U.S.A.

Senior Project Engineer-Electrical

Manage and supervise the design and provide construction services of various electrical projects. Perform quality assurance and quality control (QA/QC) of design and construction drawings, field survey or inspection, data gathering, and as built. Prepare project proposal and cost/pricing estimate. Perform project management and business development. Work with the client, and design team for project review and coordination. Review, modify, organize, and maintain the company master electrical specifications. Prepare billings and collections for electrical projects. Prepare and sign invoices. Prepare monthly cost to complete and project financial status. Analyze and report project performance. Determine the financial aspects of the projects and coordinate/adjust work effort with the team to meet the schedule. Respond to electrical issues raised during construction. Review shop drawings and contractor cost estimates. Resolve field related conflict. Supervise the subordinate and train/mentor the less-experienced electrical engineer. Provide technical expertise and support to other engineer. Identify new business opportunities. Responsible for complete design calculation, and optimization/modeling of high and low voltages electrical power distribution systems & networks, power & distribution transformers, substations, lightning protection, grounding and bonding, switchgears, switchboards, motor control centers, variable frequency drives, solid state starters, induction and synchronous motors, standby and emergency generators, UPS, lightings emergency lighting systems, indoor and outdoor lightings, electrical control systems, communication and SCADA system interface, fire and security alarm system interface for various project on water and wastewater treatment plants, pumping stations, lift stations, administration buildings, operations buildings, maintenance buildings, laboratories, and other related facilities. Coordinate project with other discipline related to design. Calculate, analyze, and perform detailed electrical studies such as power distribution system analysis, modeling, and simulation, short circuit, power system protection and relay coordination, voltage drop, load flow, power factor correction, arc flash hazard analysis, power quality, transient motor starting and stability studies. Identify and classify area classification of hazardous locations. Ensure contract compliance, cost effective designs, proper development and application of processes and on-schedule deliverables.

4

February 2001 to June 2004

CH2M Hill, Inc.

Dallas, Texas, U.S.A.

Project Engineer - Electrical

Lead, supervise and responsible for complete design (from schematic, to design development, and to final detailed design), calculation, and optimization/modeling of high and low voltages electrical power distribution systems & networks, power & distribution transformers, substations, lightning protection, grounding and bonding, switchgears, switchboards, motor control centers, variable frequency drives, solid state starters, induction and synchronous motors, standby and emergency generators, UPS, lightings emergency lighting systems, indoor and outdoor lightings, electrical control systems, communication and SCADA system interface, fire and security alarm system interface for various project on water and wastewater treatment plants, pumping stations, lift stations, administration buildings, operations buildings, maintenance buildings, laboratories, and other related facilities. Designed instrumentation and control (I&C), and developed process & instrumentation diagrams

(P&ID). Identified and classified area classification of hazardous locations. Determined the financial aspects of the projects and coordinated/adjusted work effort with the team to meet the schedule. Performed project management for multi-million dollar electrical projects and business development. Worked with the client, project manager, and design manager for project review and coordination. Performed bid process assistance, construction services, quality assurance and quality control (QA/QC) of design and construction drawings, field survey or inspection, data gathering, and as-built. Prepared project proposals, cost estimates, material & technical specifications. Reviewed shop drawings and contractor cost estimates. Resolved field related conflict.

Developed overall schedule and administration of basic and detailed electrical design. Prepared sequence of electrical installation and construction. Supervised subordinate. Coordinated project with other discipline related to design. Provided technical expertise in support of other less experienced engineer and personnel. Calculated, analyzed, and performed detailed electrical studies such as power distribution system analysis, modeling, and simulation, short circuit, power system protection and relay coordination, voltage drop, load flow, power factor correction, arc flash hazard analysis, power quality studies, transient motor starting and stability studies. Designed, modeled and implemented electrical protective relaying schemes. Ensured contract compliance, cost effective designs, proper development and application of processes and on-schedule deliverables. 5

March 1995 to February 2001

Montgomery Watson Americas, Inc.

Sunrise, Florida, U.S.A.

Senior Electrical Project Engineer

Lead, supervise and responsible for complete design in CAD (from conceptual to final), calculation, and optimization/modeling of high and low voltages electrical power distribution systems & networks, power & distribution transformers, substations, lightning protection, grounding and bonding, switchgears, switchboards, motor control centers, variable frequency drives, solid state starters, induction and synchronous motors, standby and emergency generators, UPS, lightings emergency lighting systems, indoor and outdoor lightings, electrical control systems, communication and SCADA system interface, fire and security alarm system interface for various project on water and wastewater treatment plants, pumping stations, lift stations, administration buildings, operations buildings, maintenance buildings, laboratories, and other related facilities. Designed instrumentation and control (I&C), and developed process & instrumentation diagrams (P&ID). Identified and classified area classification of hazardous locations.

Performed project management, construction management services, project control and monitoring, quality assurance and quality control (QA/QC) of design and construction drawings, field survey, data gathering, as-built. Prepared project proposals, cost estimates, material & technical specifications. Resolved conflicts or concerns regarding industry or company standards. Reviewed vendor prints and shop drawings.

Developed overall schedule and administration of basic and detailed electrical design. Prepared sequence of electrical installation and construction. Supervised subordinate. Coordinated project with other discipline related to design. Provided technical expertise in support of other less experienced engineer and personnel. Calculated, analyzed, and performed detailed electrical studies such as power distribution system analysis, modeling, and simulation, short circuit, power system protection and relay coordination, voltage drop, load flow, power factor correction, power quality studies, transient motor starting and stability studies. Designed, modeled and implemented electrical protective relaying schemes. Ensured contract compliance, cost effective designs, proper development and application of processes and on-schedule deliverables. May 1994 to March 1995

Jackson and Tull Chartered Engineers Corporation

Miami, Florida, U.S.A.

Electrical Engineer

Responsible for complete design in CAD and calculation, and optimization/modeling of high and low voltages electrical power distribution systems & networks, power & 6

distribution transformers, substations, lightning protection, grounding and bonding, switchgears, switchboards, motor control centers, induction and synchronous motors, variable frequency drives, solid state starters, standby and emergency generators, UPS, lightings emergency lighting systems, indoor and outdoor lightings, electrical control systems, communication and SCADA system interface, fire and security alarm system interface for various project on water and wastewater treatment plants, pumping stations, lift stations, administration buildings, operations buildings, maintenance buildings, laboratories, and other related facilities. Performed construction administration and coordination with all aspects of engineering disciplines. Conducted meetings with client and manufacturers in relation to the design and construction of the project. Prepared cost estimates and project specifications. Performed project control and monitoring. Performed field survey and site visit for project assessment and evaluation. Supervised subordinate. Performed short circuit calculations, load flow, voltage drop and power system protection and relay coordination.

August 1992 to April 1994

AEG Westinghouse Transportation Systems, Inc.

Miami, Florida, U.S.A.

Electrical Field Engineer

Assigned in Brickell & Omni MetroMover Extension Project. Responsible for project design management/implementation, construction management services, testing and commissioning of substation transformer, protection & relaying systems, automatic train operation (ATO) systems, power distribution systems and data transmission systems and guideways. Provided cost and schedule estimates on complicated construction programs. Provided technical expertise in support of other less experienced personnel. Designed special tools required for field maintenance or modifications. Reviewed proposed designs for maintainability considerations. Prepared report, test procedures and other related engineering documentation. December 1988 to January 1991

DeJongh Associates, Architects and Engineers

St. Thomas, United States Virgin Islands, U.S.A.

Electrical Engineer

Responsible for calculation, and optimization/modeling of high and low voltages electrical power distribution systems & networks, power & distribution transformers, substations, lightning protection, grounding and bonding, switchgears, switchboards, motor control centers, variable frequency drives, solid state starters, induction motors, standby and emergency generators, UPS, lightings emergency lighting systems, indoor ad outdoor lightings, electrical control systems, communication and SCADA system interface, fire and security alarm system interface for various project on water and wastewater treatment plants, pumping stations, lift stations, 7

administration buildings, operations buildings, maintenance buildings, laboratories, and other related facilities for various commercial and hospital projects. Performed construction administration and coordination with all aspects of engineering disciplines. Conducted meetings with client and manufacturers in relation to the design and construction of the project. Prepared cost estimates and specifications. Performed project control and monitoring. Performed field survey and site visit for project assessment and evaluation. Supervised subordinate. Calculated, analyzed, and performed detailed electrical studies such as power distribution system analysis, modeling, short circuit, power system protection and relay coordination, voltage drop, load flow, transient motor starting and stability studies. Designed and implemented electrical protective relaying schemes. Ensured contract compliance, cost effective designs, proper development and application of processes and on-schedule deliverables. September 1984 to November 1988

Rebdi Consulting Engineers

Rastanura, Saudi Arabia

Electrical Design Engineer

Four (4) years under Arabian American Oil Company (Aramco) Northern Area Design Services (NADS) for multiple Oil, Gas, and Terminal Projects. Responsible for complete design and load calculation of electrical power systems, power substations, power & distribution transformers, HV and LV switchgears, switchboards, motor control centers, motor starters, induction and synchronous motors, instrumentation & control systems, SCADA and Distributed Control Systems for Aramco oil & gas refinery plants and terminal facilities. Involved for the expansion, upgrading and modernization of various Aramco plants. Identified and classified area classification of hazardous locations.

Designed process control, SCADA, Distributed Control Systems (DCS) and instrumentation function and applications. Developed control system and instrumentation design. Recommended new or modify existing process control instrumentation to improve plant control performance. Designed and implemented advanced control strategies.

Applied Aramco Engineering Standards and Specifications and other applicable U.S. Industry Codes and Standards.

February 1982 to September 1984

Bataan Electric Cooperative, Inc.

Bataan, Philippines

Electrical Engineer

Responsible for complete design of new power transmission and distribution lines, networks, equipment and substations facilities from high to low voltage. Designed and 8

implemented electrical protective systems, devices and relaying schemes. Improved and upgraded under capacity power systems.

Calculated, analyzed, and performed detailed electrical studies such as power distribution system modeling, short circuit calculations, power system protection and relay coordination, voltage drop, load flow, and stability studies. Analyzed, computed and located systems line fault. Implemented energy conservation program, power factor correction and system loss reduction. Reviewed and approved construction drawings and specifications.

Applied various local and U.S. Industry Codes and Standards. PROFESSIONAL LICENSURE

Registered Professional Engineer (Electrical) in Texas and Florida, U.S.A. PROFESSIONAL MEMBERSHIP

Member – National Society of Professional Engineers (NSPE) – U.S.A.

Member - Institute of Electrical & Electronics Engineers (IEEE) – U.S.A.

Member - Project Management Institute (PMI) – U.S.A. PROFESSIONAL TRAINING AND SEMINARS

Various in-house Project Management Seminars

System and Equipment Grounding Seminar

Arc Flash Hazard Analysis

Generator Protection Seminar

Protection & Coordination Seminar

Overcurrent Protection Seminar

Seminar on Testing and Commissioning of Electrical Equipment

Motor Application Seminar

National Electrical Code Workshop

Industrial Fiber Optics Communication

AWARDS

Recognition of Five (5) Years Continuous Service Award, 2013 – from Saudi Aramco

Certificate of Appreciation for contribution in achieving 1 Million Safe Manhours, 2012 – from Saudi Aramco

Above and Beyond Award, 2004 – from CH2M Hill, Inc.

Performance Award, 1998 – from Montgomery Watson Americas, Inc.

Quality Recognition, 1994 – from AEG Westinghouse Transportation Systems, Inc.

COMPUTER SOFTWARES

SKM PowerTools and ETAP– Load Flow, Short Circuit Analysis, Relay Coordination, Arc Flash Analysis, Motor Starting Study, and Harmonics Analysis

Microsoft Office such as Outlook, Word, Excel, Project, and PowerPoint

Microstation and AutoCad – softwares for computer aided design/drafting 9

SKILLS/ABILITIES

Ability to understand complex concept, synthesizes information from multiple sources and make rapid decisions.

Ability to work in an operational environment and bring in technical, program/project management and field support personnel.

Possesses teamwork and solid interpersonal skills to work with a variety of personality types including executive level contacts.

Ability to multi-task and work effectively with senior level corporate

Ability to communicate effectively to all levels of organization. REFERENCES

Available upon request



Contact this candidate