Resume

Sign in

Power Plant Mechanical Engineer

Location:
Ormoc, Eastern Visayas, Philippines
Salary:
P50,000.00
Posted:
January 21, 2018

Contact this candidate

Resume:

DERENERIO G. ABEDO JR. (ME)

Registered Mechanical Engineer

Registration No. 0067097

Address : Brgy. Luna, OrmocCity, Leyte

Philippines

Contact No. : +639********* / +639********* Mobile phone (Philippines)

: +213********* (Algeria)

Email Address: ac34hi@r.postjobfree.com

BRIEF JOB SUMMARY

*Ten (10) years experience exclusively in Mechanical Inspection, Construction Equipment Erection and Operation & Maintenance.

*Expertise of Preservation, Erection and Installation, Inspection & Verification of Rotating and Static Equipment.

*Profound knowledge of practices of power plant operation and maintenance and Balance of Plant (BOP).

*Knowledge over QA/QC and inspection related international codes & standards like API (560,610,617,650,673,686), ASME-PCC-1, ASME VIII Div.1, AISC 303-05 & etc.

*Ability to communicate and formulate reports as well as supervise personnel.

*Ability to grasp computerized solutions to engineering problems and understand instruction manuals.

*Excellent troubleshooting skills.

*Achieve zero accident by observing safety policies & propose improvement and modification.

*Out of 10 years I had 8 years above overseas experience.

OBJECTIVE

To be a part of the challenging team which strives for the better growth of the organization and which explores my potential and provides me with the opportunity to enhance my knowledge with an intention to be an asset to the company.

WORK EXPERIENCES

Date : Apr. 2016 to Jan. 2018

Company : DAEWOO ENGINEERING & CONSTRUCTION

Project : RAS DJINET COMBINE CYCLE POWER PLANT PROJECT (RDCCPP), ALGERIA

Position : QA/QC MECHANICAL ENGINEER

Date : Dec. 2013 to Sept.2015

Company : GS ENGINEERING & CONSTRUCTION

Project : UGCC ETHYLENE PROJECT, UZBEKISTAN

Position : QA/QC MECHANICAL INSPECTOR

Date : Jan, 2013 to Aug, 2013

Company : DAE-AH ENGINEERING & CONSTRUCTION LTD.

HYUNDAI HEAVY INDUSTRIES Co. Ltd. (Main Contractor)

Project : ADGAS, IGD (Integrated Gas Development) PROJECT (Client)

Das Island, Abu Dhabi, UAE

Position : QC MECHANICAL INSPECTOR

Duties and Responsibilities

Preparation, review and approval of documents about InspectionTest Plan of the project to ensure inspection shall be in accordance with the required Quality Standard and Procedures.

Reviewed Method Statement regarding construction activities that will guide them to Construction Activities.

Execute and develop quality audit for Static and Rotating Equipment to assure that the required forms used in testing submitted are approved by client representative as per ITP.

Knowledge over QA/QC and inspection related international codes & standards.

Review and Preparation of Request for Inspection (RFI)/ Application for Inspection (AFI) for Client Inspection.

Erection & Inspection for Static & Rotating Equipments and Storage Tank from Anchor Bolt to Mechanical Completion.

Inspection of Erection or Installation for Selective Cracking Optimum Recovery (SCORE) Furnace and Heat Recovery Steam Generator (HRSG) including Modules, Primary Quenching Exchanger (PQE) & Secondary Quenching Exchanger (SQE),Steam Drum & its Support Structure, Refractory, Ceramic Fibers, Pyro-Bloc M-Modules & Fire Bricks insulation.

Inspection of Erection or Installation for Steam Turbine, Gas turbine & Compressor, Sea Water Pumping Station, Desalination Plant, Water Treatment Plant and Waste water Treatment.

Inspection of erection or Installation for Air Fin Cooler & Air cooled surface condenser include Alignment of setting plate, structure, tube bundle, louver, shaft, pulley, Blade Angle, Tip clearance, Belt tension, pressure testing / Dew point inspection for tube bundles, solo run of motor, Completion of inspection records &etc.

Conducts visual inspections of HVAC equipment such as component parts, complete HVAC systems, ducts, ducts leak test (Smoke or Light), vent pipes and etc.

Preparation of Punch list, Carry-Over Work, Non-Conformance Report and Corrective Action Report Verification for Inspection.

Check preservation status of equipments at site and storage area to ensure the requirements of client and vendor are done such as rust prevention to equipment especially offshore area, monitor the nitrogen purging requirements for vessels and compressors, rotation of shafting, oil filling and cleaning of equipments.

Preparation of MCCR (Mechanical Completion Check Report) package for inspection of Client inspector prior to Pre- Commissioning & Commissioning Activities.

Familiar with Piping Test Pack review, Line walk down and Punching, Pressure Test documentation.

Date : Sept, 2010 to Dec, 2012

Company : SAFARI CO. LTD

Project : Power Utilities and Construction, Jeddah KSA

GACA (General Authority Civil and Aviation) (CLIENT)

Position : POWER PLANT SUPERVISOR(Operation and Maintenance)

Duties and Responsibilities

Responsible for the Operation and Maintenance of Power Plant.

Prepared the Planned or Projected Preventive Maintenance Servicing Schedule.

To handle and Supervision of Preventive Maintenance Servicing of Diesel Generator Set and its Static and Rotating Auxiliary Equipments.

Spares inventory, ordering spares and follow ups.

Supervised Power Plant maintenance and provided support to maintenance personnel.

Aided in coaching employees and administered equipment and work area.

Work distribution to work men.

Attended brake down& Scheduled maintenance such us disassembly/assembly and alignment of BOP (Balance of Plant) Equipments.

Performing Vibration monitoring of Generator, Engine, Cooling Radiator Fan Motor, and Motor & Pump.

Update history records of scheduled maintenance.

Monitor the Operator’s log sheets and records of level, pressure and temperature.

Followed the procedure through CMMS before carried out the maintenance servicing.

Minimize plant break downtime.

Prepared fuel consumption and Generation of DG’s daily, weekly and monthly report.

Conducted toolbox meeting every week.

Performed reports and any deviation of operation and maintenance.

Oversees the work of operating staff and trains new employees.

Coordinate with the Manager to develop plans for service interruption or equipment maintenance.

Take own decision in time of emergency.

Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals.

Leads and directs the work of others.

Directly report to Site Manager.

Date : July, 2008 to March, 2010

Company : SPCC (Southern Province Cement Co.)

(Saudi Shareholder Company, Authorized Capital 1400 Million S.R.)

Tahamah Plant, Abha K.S.A.

Position : MECHANICAL ENGINEER(Preventive Maintenance Servicing)

(Maintenance Dept. / Power Plant Section)

Duties and Responsibilities

To handle Scheduling of Mechanical Maintenance Servicing of Diesel Generator and its Static and Rotating auxiliary equipment.

To monitor engine PMS schedules and its auxiliaries running hours.

Conversion of Caterpillar Diesel operation to HFO operation.

Making reports on servicing at sites.

Alignments of driven equipments.

Reading and explaining of P&ID diagram.

Work distribution to work men.

Attend brake down& Scheduled maintenance.

Update history records of scheduled maintenance.

Minimize plant break down time.

Plant scheduled maintenance planning.

Spares inventory, ordering spares and follow ups.

Training to Local staff’s & fresher’s with safe work environment, etc.

Coordinated with the Power Plant Head of Section about any deviation of Engines and planning for maintenance servicing.

To managed maintenance people and checking their job done after preventive maintenance servicing

To perform or handle Root Cause Analysis.

Organize and Plan the job during maintenance servicing and coordinated with the Head of Section and Chief of Operation.

Documentation of PMS/Overhauling as found defect and gathering the alignment record.

Took up weekly engine performance test and measurement condition.

Conducted toolbox meeting every week.

Performed reports and any deviation of operation and maintenance.

Prepared fuel consumption and Generation of DG’s daily and monthly report.

Familiar with the Operation and Maintenance of main rotating equipments of cement plant area such as Kiln, Limestone Crusher, Raw Mill and Cement Mill.

Date : January, 2008 to July, 2008

Company : SPCC (Southern Province Cement Co.)

(Saudi Shareholder Company, Authorized Capital 1400 Million S.R.)

Tahamah Plant, Abha K.S.A.

Position : POWER PLANT CONTROL ROOM OPERATOR / FIELD OPERATOR / MECHANIC

(Operation and Maintenance)

Duties and Responsibilities

Responsible to maintain reliable power plant operation to continuous providing power demand of Cement Plant Refinery Auxiliaries such as Raw Mill, Kiln, Cement Mill and Crusher.

Responsible to start and stop the engine on PSS (Power System Stabilizer) Control or LCP (Local Control Panel).

Coordinated with the CCR(Central Control Room) Operator during mill starting and stopping time

Responsible to operate the engine and monitor the LO, LFO/HFO. & Cooling Water pressure & temperature and also of its auxiliary equipments like HFO purifier, LO purifier, Heat Recovery Boiler, various pumps, Air Compressor (Motor & Engine Driven) & etc.

To keep the engine in a good condition.

To handle Engine Performance Test.

To handle regular Mechanical Maintenance servicing during planned and unplanned shutdown.

To handle Dismantle & Assemble of engine parts and its BOP (Balance of Plant) equipments.

Date: Feb.2007 to Jan.2008

Company: LAZARD POWER CORPORATION

Air Liquid Phil. Inc. (ALPI) (CLIENT)

Pasig City, Metro Manila, Philippines

Position: POWER PLANT SWITCHBOARD OPERATOR / FIELD OPERATOR/ MECHANIC

(Operation and Maintenance)

Duties and Responsibilities

Responsible to maintain reliable power plant operation to continuous providing demand power supply to Air Separating Unit & Utilities.

T o handle start and stop the engine manually.

To handle Manual Excitation and Manual Synchronization to MECO (Meralco Electric Corporation) during off-load and on-load the engine in times of emergency shutting down or from Corrective/Preventive Maintenance servicing.

Responsible to operate the engine and monitor parameters of L.O., L.F.O/H.F.O. & Cooling Water pressure & temperature and also of its auxiliary equipments.

Performing walk-by or bearing condition & vibration monitoring of motor and pump using SPM (Shock Pulse Monitoring).

Carried out Engine Performance Test.

Performing mechanical work during installation and carrying out record during start up and commissioning of 2x4.0MW NIGATA 12V40X.

To handle regular mechanical maintenance of engine & its auxiliaries during planned and unplanned shutdown together with the maintenance department team.

To keep the engine in a good condition.

Performed alignment of driven equipments.

To handle Dismantle & Assemble of engine parts such as Piston, Main Bearing, Cylinder head, Injector, Injection pump, Filters& etc. and also auxiliary equipments such as Alfa Laval Lube Oil & HFO Purifier, Pumps, Air Compressor (Motor & Engine Driven) & etc..

To achieve zero accident by observing safety policies & propose improvement and modification.

Date : Jan. 2006 to Sept. 2006

Company : NPC – LGPP (National Power Corp. – Leyte Geothermal Power Plant)

Kananga, Leyte, Philippines

Position : POWER PLANT MECHANICAL TECHNICIAN

3x37.5 MW Geothermal Steam Turbine

Duties and Responsibilities

Documentation of PMS/Overhauling as found defect Coordinated with Mechanical maintenance team in the gathering of the alignment record.

Performed other function as may be directed relative to the PMS activities.

Performed for getting Non-Destructive Test (NDT) or crack test of Steam Turbine rotor blade.

Carried out scale thickness deposit measurement of turbine stationary blade.

Carried out pipe thickness measurement of Y-discharge pipe from condenser and Cooling water pipe using DM2000 instrument.

Performed Dismantle and Assemble of Rotating equipments such as main Turbine and various of pumps.

Performed alignment of Turbine to Generator and Turbine to Governor Gearbox and other several pump.

Ability to handle multi tasks.

Performed other maintenance work during PMS activities.

EDUCATION

Registered Mechanical Engineer

Passed Board Examination in Republic of the Philippines

Professional Regulation Commission (PRC)

April 2006

PRC Registration No. 0067097

College : EVSU

Eastern Visayas State University

Tacloban City

Degree : BSME

Bachelor of Science in Mechanical Engineering

2000 – 2005

TRAINING AND SEMINAR

Diesel Engine Technology

Caterpillar Power Generation System

Tahamah Site, KSA

The theoretical and practical training in diesel engine technology comprises the subject maintenance and service of the engine series16CM 32C.

Rurex Turbocharger Specialist

Pinagbuhatan, Pasig City

Turbocharger First Line Maintenance & Condition Monitoring.

Junior Philippines Society of Mechanical Engineers (JPSME)

Tacloban City

Hydro Electric Power Plant and Efficiency Improvement of Steam Cycle.

April 12 – May 24, 2004

PNOC – EDC

Phil. National Oil Company- Energy Dev’t Corp

Ormoc City, Leyte, Philippines

On - the - Job Training

Actual training for the process of Steam Production in how to separate about 99.9% steam quality supply demand to the Power Plant, such as California Energy & National Power Corp..

COMPUTER SKILLS

Operating Systems: Windows 98/2000/XP/Vista/7/8

Software: Microsoft Office Suite (Word, Excel) and Basic Auto Cad

PERSONAL DATA

Age : 35

Birthday : January 29, 1983

Religion : Roman Catholic

Citizenship : Filipino

Status : Married

Height : 5’5”

Weight : 147 lbs.

Home address : Brgy. Luna, Ormoc City, Leyte (6541), Philippines

Note: Character references are available upon request.



Contact this candidate