Sign in

Electrical Maintenance

Manila, National Capital Region, Philippines
3000 dollars
January 17, 2018

Contact this candidate


Address : Blk *** Lot * St. Anne Deca Homes Loma degato

Marilao, Bulacan

Mobile Number : +639284241257

E- mail add :


Willing to work hard and shall to be trying to contribute my best for the continued success of the company.

To develop strong drive and commitment to meet new outstanding opportunities in a very highly competitive instruction with substantial benefit that recognize effort and achievement.

To set standard of practices from the best possible comprehensive and practical services framing goals and expertise in my field of works.

Work independently in a nature and professional manner.

Understand, maintain and perform work according to quality and environmental standards.

Read and interpret both basic electrical drawings.

Follow established company rules and regulation and safety precaution.

Works Experience :




Address : P.O.Box 107241 AL-MINA ZAYED

Abu Dhabi U. A.E.

Position : Marine Electrician (Ship Electrician)

Inclusive date : February 10, 2011 – February 19, 2015

Company Business : Ship Builder and Maintenance Ship

Duties and Responsibilities :

Read and Interpreted Electrical drawings/plan and Electrical code specification

To determine Wiring Layouts,Instalation of Cable trays,Junction box and

Preventive Maintenance.

Installer of equipments inside the Bilge pump,Fresh water pump,Fire water pump,Ballast tank pump,Grey water pump,Stering pump,Trim tab pump and all indicator,sensor controll For diesel and fuel tank.

Troubleshooting of all electrical controls for equipments in console at the wheelhouse.

Mast light,Navigation light,Stern light,Search light,Horn.

GPS and Radar System.

Heat detector,Smoke detector,Door detector,Safety fire control panel and isolator per zone.

All electrical Equipment/system on Ship.

Construct and Rebuild of the ship.

Lay-outing of elecrtrical cables,wires and other components.

ElectricalEquipment Installation and Termination(Hydraulic Drive Trim,Kohiler

12 KVA Generator,Caterpillar Engines,Gear Box connections,ZF Engine Control

Unit,Batteries,Main Panels,Sensors,Charging System,etc.)

Navigaton system and Communication Set Installation and Connection(SIMRAD

Radars,SIMRAD GPS,Multi Display NX45,IS-20 Combo,VHF Radio,Tetra

Radio,Loud Hailer,Compass,Depth Sounder etc.

Complete Electrical Installation and Testing of Fire Alarm system.

Install the Gas Detectors, Heat Detectors, Door Detectors, Isolators, Pull Station of Fire Alarm System and test, Program all the detectors, Install Main Fire Panel and Terminations.

Complete Electrical Installation, testing and Electrical commissioning of Hawaiian 50 at Abu Dhabi Mar Shipyard, Abu Dhabi.

Work Under

Power Connection of Yamaha 300 Outboard Engine, Main Distribution Panel, Bilge pumps, Heat sensor, W/C pumps, Fresh Water pump, Gray Water pump, Batteries, Lighting system, Television satellite, VHF radio, GPS Unit, Fish finder Unit, Sea water pumps, AC Units, Engine control Units, Gas Detectors, Battery switches, Fuel and water level sensor, Battery Chargers (12V and 24V) etc.

New Camera System Installation and testing on UAE Coast Guard Vessel (A60, CG102, CG101, CG3401, CG113 etc.) at ADM Shipyard, UAE.

Work Under

Make plan of installation of Camera system, Install the Camera monitor, DVR system, Joystick,Main power supply panel, make electrical drawings and termination and testing.

Continue Electrical planning and Installation for PX3-131 (18 Meter) at Abu Dhabi Mar Shipyard, Abu Dhabi.

Work Under

Terminations of SEATEK Marine Engine with Twin Disc Engine Control Unit, Termination of 12 KVA Master volt Generator, Installation of Touch Screen BONING Panel and Termination, AC Pumps and AC Units Installation and Termination, Camera System installation and termination, Touch Screen Lightings, pumps installation, Navigation System (Ray marine) installation, Electrical plans for cabling and terminations.

Company : Todiah Dairy Farm, Almarai Company, Riyadh, KSA.

Address : P.O.Box 8524, Riyadh 11 492 K.S.A.

Position : Workshop Supervisor (Electrical/Plumber/R.O. Operator)

Inclusive Date : September 08, 2002 up to April 28, 2010

Company Business : Manufacturing and export of dairy product

Duties and Responsibilities :

Read and Interpreted Electrical Drawings/Plan and Electrical code Specifications to

Determine wiring Layouts,Instalation of Cable trays,Lighting fixtures,Junction box,

And Preventive Maintenance.

Troubleshooting of all electrical motors, controls probably programmable logic control command (PLC), lightings, and others.

To ensure that all electrical installations, repairs and maintenance are in accordance with the health and safety standards of the company.

Water treatment operator, monitoring and checking the operations of plants like the controls, chemicals being used in reverse osmosis (R.O. Plant).

To ensure that RO plant is maintained in good working condition by thorough monitoring and maintenance.

To monitor and record all RO plant data in accordance with the guidelines set forth by the farm management team. To carry out daily routine operation and maintenance of the plant and to report all faults or deviations from expected performance data immediately.

Maintenance of Milking Parlour:

1.) All electrical equipment/system.

2.) Troubleshooting of control panels and diagnose of all motors being used.

3.) Monitoring and maintenance of Main Control Circuit (MCC) for chiller panel.

4.) Monitoring and maintenance of Main Control Circuit (MCC) for dairy.

5.) Monitoring and maintenance of Main Control Circuit (MCC) for korral coolers.

6.) Monitoring and maintenance of HV/LV of Main Distribution Board Power Supply.

7.) Monitoring and maintenance of Sub-station Equipments and Components.

8.) Maintenance and Troubleshooting of All Motor Control and Accessories.

Company : Saudi Building Technique Maintenance Company Ltd.

Address : P.O. Box 17563, Riyadh 11494

Kingdom Saudi Arabia,(K.S.A.)


Position : Industrial Electrician

Inclusive Date : September 06,1996 to November 01, 2000

Company business : Maintenance and Operations

Duties and Responsibilities :

Performed Scheduled Plant Preventive Maintenance(PPM) and Corrective Maintenance

Of Electrical Equipment/System of the Project as follows

1.HV Equipments and Components.

2.Standby and Safety power generation Equipments and Components.

3.HV/LV Power Monitoring and Switching Board(Mimic Board).

4.Sub-station Equipment and Components.

5.Motor Control and Accessories.

6.Main LV,Distribution Board and Distribution Panels.

7.General Lighting System.

8.Small Power System.

9.Earthing System.

Conduct Monitoring Inspection on all Sub-stations,Plant Rooms and Control Rooms.

Performed Preperation and allocation during Scheduled local and international football

Matches and Events.

Conducts and issuance of Plant Preventive Maintenance to the respective technician

to be assigned.

Preparation of scheduling time and weekly analysis of each Technician.

Monitoring and Maintenance of Air Handling Units,Water Pumps Sytems and Different Type of Hydraulic Lifts.

Power Generators like:

A.)2- Safety Diesel Generating Sets Equivalent:

500 KW (.5 MW ) 625 Kva at 0.8 PF / 900 RPM


3- Section Radiator Outside

Diesel Control Panel

Mimic Control Panel,Switch Gear Panel and C.B.

TRADE BY: South Wales Switchgear, Main Distribution Board ( MDB ).

B.)4- Stand By Generating Sets Equivalent:

1000 KW ( 1MW ) 1250 KVA at 0.8 PF / 900 RPM



3- Section Radiator Outside, Diesel Control Panel.

MADE BY: Dorman Smith Switchgear,England

Switchgear Service 13.8 KV / 630 A,60 HZ

Hawk Gas (SF6) Circuit Breaker

Inverse Timer Power Relay

Reverse Power Relay

High Temperature Power Relay

Over Current Relay

Instaneous Over Current Relay

Company : Voltage Electrical Contractor Corp. (VECC)

Address : Perpetual Help Village, Taguig, Metro Manila, Philippines

Position : Electrician

Inclusive Date : July 05, 1993 to September 1996

Company business : Electrical Contractors

Duties and Responsibilities :

Lay-outing of electrical cable wire, metal conduit and PVC pipe, like electrical metal tube (EMT), electrical metal conduit (EMC), and polyvinyl chloride (PVC) pipe.

Coordinating and confirmation to general contractor in the project of monthly, quarterly, and weekly project to be done.

Issuance of job order to respective electrician as per instruction from project engineer.

Lay-outing of electrical system high rise building (Vertical Construction type).

Character References :

Bernie pingol : Todiah Dairy Farm,Kngdom of Saudi Arabia ( K.S.A. )


Ricky F. Gutierrez : National Petrolium Contstruction Company(N.P.C.C.)

United Arab Emirates (U.A.E.)

Asst.Chief Electrician


Trainings / Seminars / Workshop attended

Products Seminar on Sensor Conducted by Institute of Integrated Electrical

Engineers of the Philippines (IIEE)

Reverview Resort and Sport Complex

February 1992

Seminar on Preventive Maintenance Review Resort and Sports Complex

February 1992

Basic Safety Course Admiral Maritime Training of the Philippines

(IMO Model Course 1, 19 - 15 hours) Plaza Sta. Cruz Manila

Personal Safety and Social Admiral Maritime Training of the Philippines

Responsibility (MTC standards-30hrs) Plaza Sta. Cruz Manila

Fire Prevention and Fire Fighting Admiral Maritime Training of the Philippines

(IMO Model Course 1, 20 – 18 hours) Plaza Sta. Cruz Manila

Elementary First Aid Admiral Maritime Training of the Philippines

(IMO Model Course 1, 13 – 12 hours) Plaza Sta. Cruz Manila

Building Wiring Electrician Technical Education and Development Authority

( 3rd Class ) Muntiparlast, Tapat District TESDA N.C.R.

Safety Electrical Work AL-MARAI CO. 11-05-2006

General Safety Awareness AL-MARAI CO. 09-09-2002

R.O. Plant Operation AL-MARAI CO. 09-15-2002

Risk Assesment Orientation AL-MARAI CO. 02-01-2003

Water Quality Analysis AL-MARAI CO. 07-01-2003

Machinery Safety Awareness & Fire Safety AL-MARAI CO. 09-22-2003

Quality Assurance Seminar AL-MARAI CO. 09-29-2003

Ingersoll-Rand Rotary Screw Air Compressor AL-MARAI CO. 08-02-2005

PLC/Telemecanique/Tweedo/Square D-Electrical AL-MARAI CO. 05-15-2006

Water Treatment R.O. Plant Operation AL-MARAI CO. 08-23-2006

Health and Safety Environment ( H S E ) Logistic Int. 02-12-2011

Confined Space Training and Seminar Logistic Int. 02-10-2012

Other information :

With 15 years of working experience as electrician in local and industrial electrician and maintenance in abroad, with the certificate here under the specific nature of works and familiar handling tools and equipments :

-HV / LV power and switching board ( mimic board )

-HV equipment

-Motor controls and accessories

-Programmable logic control ( PLC )

-Hydraulic bender

-White westing house amptector tester for over current and eart fault tester

( circuit breaker )

-High potential test ( Hi – pot ) 26 kv x 3 and fault finder for high voltage cable

- Instrumentation under industrial electrical controls

- Reverse Osmoses ( R. O. ) Water treatment operator

- Industrial and domestic wiring installer

- Driving of heavy equipment ( loader, tractor, forklift and light vehicle )

- Power plant generator operator.

Personal Data :

Education : Bachelor of Science in Electrical Engineering

Date of Birth : August 29, 1969

Nationality : Filipino

Status : Married

Contact this candidate