Electrical Engineering
Resume:
Christian Jensen
Van Nuys, CA 91405
818-***-**** Home
818-***-**** Cell
*****@***********.***
RESUME OF CHRISTIAN JENSEN
Skills:
P.L.C. Programming Allen Bradley, Omron, Mitsubishi, Siemens
Motors, Motor Controls, Ladder Logic Diagrams, AutoCAD
AC/DC Three Phase 480/220/120, 480/277, Volt Circuit Control Systems
Delta/Wye Buck/Boost Transformers, Sensors, Electrical Theory
Pneumatic Controls, Actuators, Relays, Flow Meters, HMI Screens
Developing electrical schematics through design, fabrication and test.
Developing manual text and graphic based control interfaces, with the capability for remote monitoring and control via network.
Design and fabrication oversight of multiple concurrent developmental efforts.
Support design, manufacturing, test and troubleshooting through solid working knowledge of electrical systems.
Contribute to R&D efforts through broad understanding of current state of the art electrical advances and an eye to emerging technologies.
Responsibility for specification of electrical components, layout, and manufacturing approaches.
Composing of operation and maintenance manuals.
Ability to wire and install P.L.C. systems, sensors, touch screens.
Ability to read, understand and create ladder logic diagrams.
Ability to connect, and install motors, motor controls, transformers.
Ability to install electrical service panels, sub panels, switch gear.
Ability to install pneumatic high pressure supply control systems.
Develop electrical schematics through design, fabrication and test.
Develop manual text and graphic based control interfaces, with the capability for remote monitoring and control via network.
A ‘hands-on’ person with good interpersonal skills
Experience with the implementation of PCL controllers
Development of electrical system functional design concepts
Capabilities in AC/DC circuit design and analysis
Developing of electrical and control schematics
Selection of electrical components, component/cabinet layout
Troubleshooting service calls in both digital and analog circuitry
Providing manufacturing and test support
Good presentation and technical writing skills are required
Experience with military grade air conditioner equipment is highly desirable
Experience working in an ISO 9001:2008 with design environment
Experience:
WET Design 09/17-12/17
10847 Sherman Way, 818-***-****
Sun Valley, CA 91352
Electrical Engineering Lab Technician
Duties Performed,
Assist engineering team with design and development of prototype custom design lighting and equipment for various type of water features and water fountains. These features were often very large and required hundreds of lights and automated equipment. These fountains were usually located in large hotels, theme parks, and tourist destinations. The company has designed high-tech fountains in Las Vegas (including the one in front of the famed Bellagio resort), Dubai, and Macau just to name a few. The Dubai fountain is the largest fountain on planet Earth and is located at the base of Burj Khalifa, the world’s tallest building.
Mole Richardson Company, Studio Lighting from Hollywood 12/12-9/17
12154 Montague Street, 323-***-****
Pacoima, CA 91331
Senior Electrical Engineering Lab Technician
Duties Performed,
Assist engineering team with design and development of prototype custom design lighting for the photographic and motion picture film industries. Lighting requirements are created for the special needs of color temperature spectrum output and resolution on film. Custom fabrication of all parts and assemblies. Design and installation of all electrical components of the electrical system per project requirements. Assist with production development and implementation. Assist the production managers with production release of product designs.
Applied Companies 07/09-06/12
28020 Avenue Stanford, 661-***-****
Valencia, CA 91355
Electrical Technician
Duties Performed,
Manufacturer of tactical, mobile environmental control units, chillers for directed energy systems and diesel generators, and environmental control units. Electrical department position, assemble and wire entire units and sub-assemblies for custom design high voltage tactical military grade environmental control units. Installation of electrical motor control components per electrical schematic diagrams. Installations of Electric Motors, Contactors, Transformers, Relays, Switches. Verification and troubleshooting of unit for final run testing of systems. Troubleshoot, repair and rebuild of broken equipment returned from field use. Major customers include General Dynamics, Lockheed Martin, L-3 Communications, Raytheon, Sierra Nevada, Elbit Systems Ltd and Northrop Grumman
Paramount Studios, I.B.E.W Local 40, 01/09-05/09
5555 Melrose Avenue, 818-***-****
Los Angeles, CA 90038
Motion Picture Journeyman Electrician
Duties Performed,
Installations of high voltage electrical systems. Commercial/Industrial construction projects. Tenant improvement for office spaces, upgrades and remodels. Installations of Electrical Conduits “EMT/Flex”, Custom Lighting, Switches, Receptacles, Electrical Service Panels and Sub Panels, Over Current Protection Devices “Circuit Breakers”.
Universal Studios, I.B.E.W. Local 40 04/08-11/08
100 Universal City Plaza, 818-***-****
Studio City, CA 91608
Motion Picture Journeyman Electrician
Duties Performed,
Installations of high voltage electrical systems. Commercial/Industrial construction projects. Tenant improvement for office spaces, upgrades and remodels. Installations of Electrical Conduits “EMT/Flex”, Custom Lighting, Switches, Receptacles, Electrical Service Panels and Sub Panels, Over Current Protection Devices “Circuit Breakers”.
Norchem Industries 03/07-03/08
5649 Alhambra Avenue, 323-***-****
Los Angeles, CA 90032
System Controls Electrical Technician
Duties Performed,
Design and assemble industrial automated gray water filtration systems for use in the industrial laundry industries, design and assemble industrial laundry chemical dispensing systems and design and assemble industrial waste water reclamation systems. These systems are very large and electrically complex. I install and wire all electrical components per project to include; PLC’s, Motors 240-480 volts, Starters, Contactors VFD’s, Relays, Sensors, Valves, Transformers, HMI’s.
Kavlico Corporation 03/05-12/06
14501 Princeton Avenue, 805-***-****
Moorpark, CA 93021
Automation Safety Technologist
Duties Performed,
Design, assemble, modify and upgrade automated testing equipment for the automobile, aviation, and defense industries. Design and assemble new automated equipment. Cut
and assemble framework. Design and install electrical systems including PLC’s Power Supplies, Transformers, Motors, Contactors, Din-Rail Components, Relays, Switches Light-Curtains, and Pneumatic Safety Dump Valves, Door Panel Interlocks. Install pneumatic system for “Pick and Place Slide systems. Redesign and upgrade old equipment to new OSHA Standards. Installations of Automation Safety Equipment.
Thrasher Electric 04/02-03/05
1431 Cypress Avenue, 626-***-****
San Dimas, CA 91773
Journeyman Electrician
Duties Performed,
Installation of electrical systems for industrial and commercial and residential applications to include, Panels, Sub Panels, Conduits (All Types), Underground PVC, Bend and install EMT, Lighting Systems, Motors, Fans, Receptacles, Switches. Construction of new restaurants Jack in Box, McDonalds, El Polo loco facilities.
Fine Built Interiors 08/99-12/01
15132 Covello Street, 818-***-****
Van Nuys, CA 91405
Drywall Installation
Duties Performed,
Installation of steel stud framing, and drywall. Reconstruction of office space. Removal and replacement of walls, doors, windows, electrical switches, receptacles, and lighting. High-rise building tenant improvement construction applications.
E.M. Basile & Associates Exhibit Masters 07/96-08/99
9600 Irondale Avenue, 661-***-****
Chatsworth, CA 91311
Carpenter/Electrician
Duties Performed,
Design and assemble portable custom design exhibits for trade shows and conventions.
The exhibits were built to be assembled and disassembled as needed and packed in crates to be shipped to locations throughout the world. Wood cabinet shop environment working with Saws, Drills, Routers, Nail Guns. Wire and install lighting systems for the exhibits.
EDUCATIONAL BACKGROUND:
Los Angeles Valley College
58010 Fulton Avenue, 818-***-****
Valley Glen, CA 91401
Degree:
ASEE Electronics Engineering June 6, 2017
Graduate Cum Laude, GP: 3.6
Phi Theta Kappa Honor Society Member Since 2017
Los Angeles Valley College
58010 Fulton Avenue, 818-***-****
Valley Glen, CA 91401
Current Major:
Electrical Engineering
Technical Training:
National Institute of Technology
236 East 3rd Street, 562-***-****
Long Beach, CA 90802
Diploma:
Industrial Electrical Technology
Areas of study included Industrial Automation Control, HMI Wonderware, and PLC
Software-Logic Master 90-30/Rockwell RS Logix 500, PLC Allen Bradley SLC 500,
N.E.C. electrical safety regulations, multi meters, low voltage signal circuits,
Commercial / industrial wiring, transformer configurations, electrical AC/DC motors,
Relays, timers, switches, electromagnetic motor controls, lighting controls, preventive
Maintenance and Troubleshooting
El Camino Real High School
5440 Valley Circle Blvd., 818-***-****
Woodland Hills, CA 91367
Diploma:
GED Certificate
CERTIFICATES:
Los Angeles Valley College
Certified Electronics Technician
Contact this candidate