Harish Ram Humbe
Address: RNO-***-A, Mauli niwas, Shivajinagar area, Kalyan-Bhiwandi road, kongaon.
Taluka - Bhiwandi, District: Thane, Maharashtra.
EMAIL ID- ac2ety@r.postjobfree.com
Contact No:- 902-***-****.
CAREER OBJECTIVE
Seeking challenging career in mechanical engineering to work at challenging & rewarding position which offers diverse job responsibility and contributing to organization's success by applying both my technical & managerial skills.
PROFESSIONAL SNAPSHOT
- Pursued bachelors degree in mechanical engineering with FIRST CLASS throughout the academics.
- Qualified ASNT LEVEL-II IN RT, UT, MPT, LPT.
- Qualified preparatory course for Quality assurance (QA) & Quality control (QC).
- Working as a QA-QC engineer with 2 year of experience in Machining, Fabrication & Powder-Coating department.
-Worked on ASME, ASNT, ASTM, IBR & API 650 & ISO STANDARDS & CODES.
- Working experience in implementing Six Sigma, TQM, SPC/SQC tools & technique.
Examination
Institute
Board/
University
Percentage
Class/Div
Year Of Passing
B.E(Mechanical)
Yadavrao Tasgaonkar College Of Engineering & Management
Mumbai University
65.73 %
FIRST CLASS
May-2015
Examination
Institute
Board/
University
Percentage
Class/Div
Year Of Passing
HSC
C.H.M college
MAHARASHTRA STATE
68%
First class
2011
SSC
G.N.E.S
MAHARASHTRA STATE
85 %
Distinction
2009
ACADEMIC PROJECT
Title :GEARLESS TRANSMISSION DEVICE FOR PERPENDICULAR MOTION TRANSMISSION
Principle: It is an ingenious link mechanism which is based on the principle of 'ELBOW MECHANISM'.
Description: Design and Development of “GEARLESS TRANSMISSION DEVICE”.
The project “GEARLESS TRANSMISSION” being compact and portable equipment, gives us knowledge, experience, skill and new idea of manufacturing. It works on the principle of ‘Elbow Mechanism’ for Gearless Power Transmission for 900 shafts. This mechanism transmits the I/P power towards O/P shaft with high efficiency as compared to that of Bevel gears.
TECHNICAL EXPERIENCE
Worked at LANSH ENGINEERING PRIVATE LIMITED as a QA-QC Engineer on following projects.
Client name- LUBRIZOL INDIA PRIVATE LIMITED.
Project title- SELF SUPPORTED INDUSTRIAL CHIMNEY
Project details-The self supporting chimney 30 m long.
Design code-IS:6533/GEP.
Material handled- IS 2062 GR B, A 106 GR B, A 105, A 234 WPB, A 193 GR B6, A 194 GR B6.
Client name- BALKRISHNA CHEMICALS LIMITED.
Project title- DEAERATOR AND FEED WATER STORAGE TANK(PRESSURE VESSEL).
Design code- ASME sec 8 div 1.
Material handled- SA 516 GR 70, A 106 GR B, A 105, A 234 WPB, A 316,A 312 TP 316, A 403 TP 316, A 182 F316.
Design pressure & temperature-2 kg/ & 120 c, De-aeration capacity-15/hr, storage tank capacity-7.375.
Client name- LECHLER INDIA PRIVATE LIMITED.
Project title- Skid mountings, utility & process piping.
Design code-ASME B31.3
Material handled- IS 2062 GR BR, A 106 GR B,A 105,A 234 WPB.
Client name- CEAT SPECIALITY PRIVATE LIIMITED.
Project title- STORAGE TANKS (150KL,100 KL,75KL,20KL).
Design code- API 650.
Material handled- IS 2062 E250 GR BR, A106 GR B, A105, A234 WPB.
client name- Bal Krishna chemicals limited.
project title- Pressure reducing station & control station (PIPPING).
Design code- IBR 1950.
Material handled- A 106, A 234 WPB, A 105.
Inlet pressure-18 kg/g, outlet pressure-1.5 kg/g, Flow rate-3505 kg/hr.
client name- Indorama industries.
project title- 120 TPH Atmospheric fluidized bed combustion chamber Boilers.
Design code- IBR 1950.
Material handled- SA 516 GR70, BS 3659, A 312, A 213.
Boiler operating pressure-26 KG/g, flow rate- 12000kg/hr.
Performed following responsibilities.
Planning & Scheduling the operation.
QA & QC NDT REPORTS.
Incoming material & consumable inspection.
Establishing project wise QAP, WPS, PQR, & WQT.
Preparing inspection reports, daily reports, etc.
Witnessing Non-destructive as well as Destructive testing & review of reports.
Witnessing hydro test & pneumatic test with clients.
Issue of mechanical clearance certificate & attending weekly meeting & QA-QC feedback to management.
Presently working at G.M.P TECHNICAL SOLUTION PVT LTD as a Quality Engineer ( QA-QC ), performed following responsibilities.
Dimensional Inspection of components and assemblies with repeatable results and analysis of deviations with proposed course for rectification.
Develop and propose future actions for all deviations in job during inspection/ Field Complaints along with Design and manufacturing as a part of CAPA procedure/ QFS.
Prepare,Approve Regularize and maintain QAP for process / Products .
Maintain effectiveness of TQM & Quality Systems in QA.
Process control of critical processes by using statistical techniques.
Develop, implement & Improve quality system/ Process at vendors end as well as In-house.
Involvement in Kaizen, TPM, Safety as well as NPD Process QM & Quality Plan .
Review Of Final Product Inspection process & Proceed Audits .
Maintaining Product Certification like BIS .
Conducting Supplier Audit.
TECHNICAL KNOWLEDGE
AUTOCADD & CREO
NDT LEVEL-2 IN RT, UT, MPT, LPT
QA-QC
SIX SIGMA, SPC/SQC TECHNIQUES, MSA & NPD PROCESS, KAIZEN,TQM
Proficiency in Microsoft office (Word, Excel, Power point)
Working platforms (Windows XP, Windows 8, Windows 7)
PERSONAL SNIPPETS
Name: Mr. Harish Ram Humbe
Father’s Name:- Mr. Ram Mahadev Humbe
Nationality :- Indian
Gender :- Male
Marital Status :- Single
Date Of Birth :- 12th September 1993
Hobbies :- Playing outdoor games,
Watching movies.
Strength :- Communication Skills, Result Orientation with Execution Skill, Technical Acumen, Computer Knowledge, Analytical Skill, Interpersonal Skill.
Declaration:
I hereby declare that the above mentioned information is correct and true to the best of my knowledge.
Place: KALYAN
Date:
(Harish Humbe)