Curriculum Vitae

Personal Detail:

Full Name: SAMIULLAH KHAN

Cell Phone #: +92-333-******* & +92-323-*******

Email: ac1xcu@r.postjobfree.com

Skype ID: Saimkhan666

Nationality: Pakistani

Date of Birth: 08 Feb, 1982

Qualification: B-Tech (Hons) in Mechanical Technology

3 year’s Diploma of Associate Engineer in Mechanical Technology

Diploma in Industrial Safety Management (Oil, Gas,Chemical and constructionSafety)

Experience: 07+ years in (Painting-Coating Inspection)

Certifications: BGAS Painting Inspector Grade-2 TWI -United Kingdom

Lead Auditor Environmental (EMS: ISO- 14001:2004) IRCA, United Kingdom

Quality Management System QMS (ISO- 9001:2008) NILAT, Karachi, Pakistan

Social Accountability Standard SA-8000, ILO: NILAT, Karachi Pakistan

Occupational Health & Safety Standard: OHSAS 18001:2007

NDT Level-II (Eddy Current Testing, PT & MT) NCNDT, Islamabad, Pakistan

Post Applied For: QA/QC Painting-Coating Inspector

Career Summery:

I am certified BGAS Level -2 Painting Inspector having more than 10 years of work experience in industries like Oil & Gas, Petrochemicals plants, Power Plants, HVAC units, HRSG Boilers, Pipelines,Work shops Fabrication of Pressure Vessels,Heat Exchangers and Crude Oil Storage Tanks. Having good analytical background of Inspections, Testing, Engineering Maintenance, Plant Rehabilitation, Development work of upgrading all Company's plants, Equipment, Installations and structures for Corrosion Treatment, Prevention and Painting-Coating Inspection. Well Aware about Saudi ARMCO standard, SAES ‘H’ series, SAIC, SATIP, SSPC, ISO, NACE and QP standard of Paintings and Coating.

Expertise in Following Test Methods:

Standard Test Methods for Evaluation of Adhesion of Paint System.

Test to Detect The Presence of Oil And Grease.

Scratch Cut Test for Paint Adhesion.

Pull-off test for strength of coating (Dolly test).

Holiday Test (High voltage & Low Voltage).

Test to detect the contamination on substrate, such as Chloride test, Nitrate test and Sulphate test.

Test to Detect The Presence of Moisture on a Subtract.

Expertise in Following Coating Inspection :

Coating & Painting Inspection of FBE Coating, Zinc Galvanizing Pickling and Passivation, Insulation and Pipe wrapping.

Monitoring the pre blasting activities like check for weld spatters, oil & grease or other contamination, check for air quality by blotter test.

Inspection of blasting quality & blasting grades & check quality test and anchor profile check, salt contamination test.

Carry out quality tests like wet film thickness, dry film thickness, adhesion test and holiday test.

Selecting and reviewing the paint materials as per project specifications and manufacturer’s product data sheet.

Thorough knowledge of coating instruments- like Hygro thermometer, Substrate film thickness gauges, Adhesion tape / pull of test gauge, Holiday test, salt contamination test.

Witness / checking of Dry Film Thickness and Holiday detection / Pin hole detection.

Participate to construction, HSE or QA/QC specific audits or visits.

Employment and Work Experience:

1. Organization: Descon Engineering Pvt. Ltd. Pakistan

Currently, I am working with Descon Engineering Pvt. Ltd. (Pakistan) as a Painting-Coating Inspector

Client: Lasmo Oil Limited, Pakistan

Project: Bhit Gas Field Development Project Kirther-Pakistan

Position: QA/QC Painting-Coating Inspector

Duration: Jan, 2015 to till Date.

Work Scope: Above Ground & Under Ground Gas Process Piping, Fire Fighting Systems Piping, Gasoline Tanks Painting, Erection of Water Treatment Plant.

Job Responsibilities:

Reviewing and implementation of painting procedures, Engineering procedure, Quality Control Procedure, Inspection Test Plan (ITP), Method statements (MS) according To Jobs Designed Specification, Jobs Services Condition and Services Environmental Condition approved by Clients.

Ensure the valid and correct status of calibration of equipment and inspection gauges.

Ensure the weather condition like Relative Humidity, Dew Point, and Surface Temperature that are suitable for surface preparation and paint application.

Execute the specific inspections on materials, equipment receiving storage, and surface preparation application and finally Fire proofing to adherence to manufactures recommendations.

Supervision of stage wise Blasting, painting / coating and inspection.

Read, Understand and notify to construction & subordinates about any changes made in specifications, drawings, technical query, site instructions as built.

Review and familiarize project specification, codes, standards for Major clients and other relevant standards applicable to the project.

Witness abrasive blaster and coating applicator test and review their qualification as per current client standards, and issued them job clearance certificate (JCC). Familiar in painting systems recommendations, trial conducting, paint defects and trouble shooting for different kinds of coatings like acrylics, epoxy, polyurethanes, zinc silicate alkyds, water borne paints.

Conducting monthly awareness program for Blasters and Painters for continual improvements and quality assurance.

Implementation of quality program, which include inspection, testing and proper Documentation and ensure that all works complied with specifications and HSE requirements.

Assistance to Internal Auditor for ISO QMS 9001 and ISO 14001 EMS audits.

Issue Log Book Entry (LBE), Non Conformance Report (NCR), Surveillance Report or Memo for any violation regarding work procedure or specification.

Preparation of project documents, co-ordination for internal auditing.

Good understanding of painting standards and other related reference documents like Saudi ARMCO standard, SAES ‘H’ series, SSPC, ISO, NACE and QP.

2. Organization: Heavy Mechanical Complex Pvt. Ltd. Pakistan

I had worked with this organization as a Painting & Coating Inspector from May, 2010 to Dec, 2014.

Client: BHP Petroleum Pvt. Ltd. Pakistan /SUI SOUTHERN GAS Comp. Ltd

Project: ZAM (B&D) Wellheads to BHP Gas Processing Plant

D/S MARI Gas Fields to FFC NG Line Compressor Station

Position: QA/QC Painting-Coating Inspector

Duration: May, 2010 to Dec, 2014

Work Scope: Pipes & Structure above ground and underground (Painting, Wrapping, Insulation, Cathodic Protection. Tanks Internal & External Painting. Erection of Oil Storage Tanks, Gasoline Tank. Completion of Punch Lists & Project Dossier.

Job Responsibilities:

Assessment the types & rate of corrosion and solution.

Preparation of Inspection test plan (ITP) related coating. Undertake QC painting / coating activities in the work place for daily basis.

Supervise and inspection of stage wise blasting & painting works and insulation works.

Monitor weather condition for surface preparation and painting / coating application.

Hot dip galvanizing coating inspection in galvanizing plant.

Responsible for incoming coating / painting material inspection and has to ensure whether these materials suits to meets the requirements of project specifications.

Check the environmental condition before blasting and painting.

Prepare all necessary QA / QC painting / coating documents and handed over to clients review.

To undertake test qualifications for spray painters, brush painter’s hydro blasters & abrasive blasters.

Prepare “punch list items” in conjunction with client QA/QC representative and closeout punch list with Execution representative.

Report immediately to the Company Site Representative any anomaly or non-conformity.

3. Organization: Descon Engineering Pvt. Ltd. Pakistan

I had worked with this organization from Sep, 2006 Mar, 2009 as a Shift Engineer Mechanical

Client: Master Textile Mills Pvt . Ltd Lahore– Pakistan

Project: Rehabilitation & Development of Master Power House

Position: Shift Engineer Mechanical

Duration: Sep, 2006 Mar, 2009

Work Scope: Erection, Commissioning and operation of SOLAR C-50 Gas Turbine Turbo Mach SA Switzerland (Capacity 2X4.6MW), Air Compressor, Arial Screw Gas Compressor, Reverse Osmosis Water Treatment Plant, Steam Generator Water Tube, LG Double effect steam Absorption Chillers, Cooling Towers. Pressure Vessels, Waste water Treatment Plant.

Job Responsibilities:

Erection & Commissioning of SOLAR C 50 Solar Gas Turbines (2X4.6MW) By TURBOMACH SA Switzerland.

Erection & Commissioning of Arial Screw Gas Compressors (2X1500 m3/hr) By Enerproject SA Switzerland.

Erection & Commissioning of LG Double effect steam Absorption Chillers Model W-63 (570 USRT /Hr).

Erection & Commissioning of Cooling Towers and chilled water pumping station.

Exchange the engine and overhauling of Solar Gas Turbine C50 (4.6MW).

Erection and Commissioning of 1Sets Waste Heat Recovery Boilers 20 Ton/h by Descon Engineering, Pakistan.

Erection & Commissioning of 03 Cooling Towers 15 ft (315 m3/hr) for Chiller by FRP Lahore Pakistan.

Erection & Commissioning of Reverse Osmosis water treatment plant (20 m3/hr) By CWG Water Technology Germany.

Erection & Commissioning of LG Double effect steam absorption chiller Model WH -150 (1390 USRT /Hr (Asia’s Largest chillers plant).

Erection & Commissioning of 03 Cooling Towers 25 ft (1000 m3/hr ) for Chillers By FRP Lahore Pakistan (Pakistan Largest Cooling Towers).

Erection & Commissioning OF Waste Water Treatment Plant by AKAREMPEX Company.

Computer and IT Skills:

Proficient in preparing all kinds of management presentations and management reports.

Proficient in data and trend analysis. Also can make all kind of formal/Informal Letters, Minutes of Meetings.

Organize Events Management like Safety Seminars/workshops/work Ethics.

Well versed with Windows XP/2000/Vista, MS Office (Word, Excel, and PowerPoint)

And Internet Communication & Applications.

Professional Qualification & Career Development Courses:

Paints Evaluation, Application, storage & Safety (PCSIR LABS), Pakistan.

Corrosion Protection Course BY BERGER Paints, Pakistan

Fire Fighting & Fire Prevention Practices and Procedures.

Medical First Aid Practices and Procedures.

CSWIP. Welding Inspector-3.1(Continuing)

Personal Details:

Name: SAMIULLAH KHAN:

Nationality: Pakistani

E-mail: ac1xcu@r.postjobfree.com

Skype: Saimkhan666

Passport No: Valid till May, 2022

Language Skills: English, Urdu, Punjabi,

References:

1. Mr. Farhat Saeed QA/QC Engineer MOL Pakistan. Ltd Cell No. 031*-*******.

2. Mr. Muhammad Ramzan NDT Engineer & HSE Auditor Descon Engg Cell No. 033*-*******.

Declaration:

I hereby declare that the information furnished above is true to the best of my knowledge. Necessary required documents can be provided on demand.

Date: 18 august, 2017 (Samiullah Khan)

Contact this candidate