Resume

Sign in

Power Plant Engineer

Location:
Quezon City, National Capital Region, Philippines
Posted:
August 31, 2017

Contact this candidate

MANUEL COLONA AMOYLIN, Jr.

Address : ** ***** **., ***** **** 65, Doha, Qatar

Telephone : +97444600641 (Home phone, QATAR)

Mobile : +97433840441 (QATAR)

e-mail : ac13t4@r.postjobfree.com

Permanent Address: Blk.7, Lot 77, Binga St. NAPOCOR VILLAGE, Tandang Sora

Quezon City, Philippines

Home Telephone number: +632-******* (Philippines)

Mobile: +639082814381

Objectives:

To work and maintain a job position as an Instruments Engineer / Instruments Supervisor or any position that will suit my qualification especially in the field of Instrumentation. To have a hands-on participation and directly works on projects on the initial stage from erection, installation, inspection, calibration, testing, pre-commissioning, commissioning and up to final project hand over on Utility projects specifically in Oil & Gas Project, Power Generation Plant, Petrochemical plant, Processing & Water treatment plant and Refineries. To further pursue my career in the Maintenance and Operation of operating plants and be involved on its activities such as: preventive maintenance, reactive maintenance, calibration, trouble shooting, inspection, monitoring, overhauling, repair and running of its units and equipment.

EXPERIENCE IN ABROAD:

COMPANY: QATAR PETROCHEMICAL COMPANY ( QAPCO)

POSITION: INSTRUMENTS ENGINEER

DATE: 6 DECEMBER 2016 to 16 MARCH 2017

PROJECT: QAPCO POWER EXPANSION PROJECT/ GAS TURBINE

Inspection and Quality control team for Instrumentation. Performing the job in erection, construction, installation, punch item rectification and completion as per quality and standard requirement, testing, calibration, loop checking and testing, pre-commissioning, commissioning and final project hand over activities for INSTRUMENTATION DISCIPLINE. Owned by QAPCO (QATAR PETROCHEMICAL COMPANY a subsidiary of QATAR PETROLEUM, QATAR).

Units

GAS TURBINE MS5001 PA/ G.E. NOVO PIGNONE. QAPCO Gas Turbine units 1& 2 replacement, GT-3, 4 & 5 Refurbishment & New Gas Turbine Power Generating unit supply (Gas Turbine MS5001 PA/ G.E. NOVO PIGNONE unit, 30 MW power output).

COMPANY: SAUDI ARAMCO

POSITION: INSTRUMENTS ENGINEER

DATE: 10 MARCH 2013 to 5 JANUARY 2016

PROJECT: SHAYBAH NATURAL GAS to LIQUID PROJECT for SAUDI

ARAMCO, KINGDOM OF SAUDI ARABIA

(Project management, construction, installation, inspection, monitoring,calibration, testing, pre-commissioning, commissioning and final project hand over activities). Owned by Saudi Aramco, Kingdom of Saudi Arabia.

Units

Low Pressure Gas Compression:

Driving Equipment: Gas Turbine: GENERAL ELECTRIC (GE)

Driven Equipment: Centrifugal Compressor- GENERAL ELECTRIC (GE)

Low Pressure Gas Compression:

Driving Equipment: ABB Electric Motor

Driven Equipment: Reciprocating Compressor (GE)

POWER GENERATING UNITS:

Driving Equipment: Gas Turbine: GE10-1

Driven Equipment: GE Electric Power Generator at 10 MW per unit x 8 units

Field Instrumentation Devices: Process variable devices such as transmitters, gauges, controllers, valves, transducers, analyzers, sensors, motors, alarms, hydraulic and pneumatic valves, solenoids, fire detection and alarm system and gas leak detection system, junction boxes, DCS, cables and cable trays.

Duties and Responsibilities:

As a Commissioning Instruments Engineer:

Responsible for supervision and monitoring to all contractors.

Closely monitor and resolved all queries raised by sub-contractors regarding technical non conformities and standards, review all change work as required.

Liaise with the QA/QC to ensure the RFI for test and reports and NCR are closed out.

Prepare and review method statement, Pre-commissioning procedures, checks, tests, mechanical completion of instruments in line with the P & ID’s and etc…,

Supervision of inspection and loop test are carried out in safe and controlled manner.

Liaise with the construction and commissioning team.

Attending the minutes of meeting with the client regarding the progress of the work and quality related issues.

Perform technical task assigned by the Commissioning site Leader related to the preparation and execution of the pre-commissioning, commissioning, start-up activities. Interface with construction, Engineering, Procurement Contractor disciplines, construction personnel, vendors and subcontractors.

Sign off mechanical completion, Pre-commissioning tests, checks sheets and verify progress database.

Liaised for Signed Loop Folders.

Assigned to the Commissioning & Start-up group for plant facility commissioning.

Duties include commissioning of all plant instrumentation and associated equipment, including all F&G systems, ESD, SIS, PCS and Distributed Control System.

COMPANY: SAUDI ARAMCO

POSITION: E & I COMMISSIONING ENGINEER

DATE: 18 FEBRUARY 2009 to JANUARY 2013

PROJECT: KING ABDULLAH UNIVERSITY OF SCIENCE & TECHNOLOGY PROJECT

Building Management System (BMS), Building Automation System (BAS)

HVAC and Air handling units, DCS, Fire Alarm and Detection System, Installation of

Data Network and communication system.

(Construction, installation, calibration, testing, pre-commissioning, commissioning and final project hand over activities). Owned by Saudi Aramco, Kingdom of Saudi Arabia.

Units and Equipment handled:

HONEYWELL for Fire Detection and Alarm System.

3W NETWORKS for CCTV and Paging System.

SIEMENS for Building Management System (BMS) and Building Automation System (BAS).

YOKOGAWA for Distributed Control System (DCS).

GE for chiller pumps and motors.

Duties and Responsibilities:

As an E & I Commissioning Engineer:

Responsible for supervision and monitoring to all contractors.

Closely monitor and resolved all queries raised by sub-contractors regarding technical non conformities and standards, review all change work as required.

Liaise with the QA/QC to ensure the RFI for test and reports and NCR are closed out.

Prepare and review method statement, Pre-commissioning procedures, checks, tests, mechanical completion of instruments in line with the P & ID’s and etc…,

Supervision of inspection and loop test are carried out in safe and controlled manner.

Liaise with the construction and commissioning team.

Attending the minutes of meeting with the client regarding the progress of the work and quality related issues.

Perform technical task assigned by the Commissioning site Leader related to the preparation and execution of the pre-commissioning, commissioning, start-up activities. Interface with construction, Engineering, Procurement Contractor disciplines, construction personnel, vendors and subcontractors.

Sign off mechanical completion, Pre-commissioning tests, checks sheets and verify progress database.

Liaised for Signed Loop Folders.

Assigned to the Commissioning & Start-up group for plant facility commissioning.

Duties include commissioning of all plant instrumentation and associated equipment, including all F&G systems, ESD, SIS, PCS and Distributed Control System.

WORK EXPERIENCE IN THE PHILIPPINES

COMPANY: NATIONAL POWER CORPORATION- PHILIPPINES

POSITION: MAINTENANCE & OPERATION INSTRUMENTS ENGINEER

DATE: MARCH 2003 to JANUARY 2009

PROJECT: MAINTENANCE & OPERATION FOR POWER GENERATION COMPANY

DIESEL POWER PLANT AND GAS TURBINE POWER PLANT

UNITS HANDLED:

PIELSTIK DIESEL ENGINE rated at 10 MW each x 12 units.

ALSTOM GAS TURBINE UNITS rated at 30 MW each x 2 units.

GE GAS TURBINE UNITS rated at 12 MW each x 2 units.

Duties and Responsibilities:

As a Maintenance & Operation Instruments Engineer:

Coordinate with the Operations Department regarding plant operation and discuss if any abnormalities arises in the course of equipment operation, if any. Coordinate to other department for smooth and efficient operation of plant. Liaise and Supervise technicians in inspection and monitoring and allocating job assignments as per expertise and scope. In-charge in the operation and maintenance of various Instruments & control equipment (Honeywell, Fisher, Ashcroft, Siemens, Hitachi, GE, Bailey & etc.) associated in Gas turbine & Diesel power plant. In charge in overhauling, calibration and trouble shooting of various instruments and equipment from sensors, pipings, transmitters, controllers and final control elements such as control valves, indicators, tripping devices, alarms and protection devices in line with controlling process variables such as pressure, level, flow and temperature.

COMPANY: NATIONAL POWER CORPORATION- PHILIPPINES

POSITION: MAINTENANCE & OPERATION INSTRUMENTS ENGINEER

DATE: JULY 2001 to FEBRUARY 2003

PROJECT: ENERGY SERVICES COMPANY- NATIONAL POWER CORPORATION (PHILIPPINES)

UNITS HANDLED:

GAS TURBINE POWER PLANT, DIESEL POWER PLANT, COAL FIRED THERMAL POWER PLANT, BUNKER FUEL FIRED POWER PLANT, HYDRO POWER PLANT AND GEOTHERMAL POWER PLANT.

Duties and Responsibilities:

As a Maintenance & Operation Instruments Engineer:

Responsible in supervising, monitoring, inspection, testing and analysis of instrumentation equipment on independent power producers as per regulation and conduct plant efficiency and performance testing with the use of various test instruments such as pneumatic & electronic test calibrators, analyzers and multi testers. Gathers fuel samples such as bunker fuel, light diesel, coal etc. for analysis. Gather data and records test results for evaluation of Senior test engineers.

COMPANY: NATIONAL POWER CORPORATION- PHILIPPINES

POSITION: JUNIOR INSTRUMENTS ENGINEER

DATE: NOVEMBER 1982 to JUNE 2001

PROJECT: THERMAL POWER PLANT-NATIONAL POWER CORPORATION (PHILIPPINES)

UNITS HANDLED:

TURBINE- BOILER THERMAL POWER PLANT

BABCOCK- HITACHI BOILERS x 4 sets

GENERAL ELECTRIC for TURBINE- GENERATOR SET- 1 UNIT x 150 MW

SIEMENS TURBINE- GENERATOR SET- 3 UNITS x 300 MW

Duties and Responsibilities:

As a Junior Instruments Engineer:

Coordinate with the Operations Department regarding plant operation and discuss if any abnormalities arises in the course of equipment operation, if any. Coordinate to other department for smooth and efficient operation of plant. Liaise and Supervise technicians in inspection and monitoring and allocating job assignments as per expertise and scope. Hands on activities on calibration, troubleshooting, installation, repair, overhauling and maintenance of various instruments and equipment in power plant as well as water treatment facilities. In-charged in the efficient and proper operation of power plant equipment such as turbines, boilers, auxiliaries, cooling systems, fuel systems and water treatment facilities and ensure that proper operation and maintenance of units are always observed.

Professional Skills and Achievements:

Most recent achievement is the safe and successful completion of the Shaybah-Natural Gas to Liquid (NGL) project for Saudi Aramco in the Kingdom of Saudi Arabia. Performing the job of Instruments Engineer as Project Management Team (PMT) in-charge in construction, installation, inspection, monitoring, calibration, testing, pre-commissioning and commissioning to final hand over.

Successfully and safely completed the King Abdullah University of Science & Technology (KAUST) project for Saudi Aramco in Thuwal, Kingdom of Saudi Arabia. Performing the Job of Instruments Engineer for construction, installation, inspection, monitoring, testing, pre-commissioning, commissioning in Building Management System (BMS) and Building Automation System (BAS).

27 (Twenty seven) years of continous sevice in the power generation company specifically in Thermal Power Plant, Diesel Power Plant, Gas Turbine Power Plant, and Geothermal Power Plant in maintenance and operation. Performing the job such as installation, testing, trouble shooting, calibration, repair, overhauling on different power plant systems and sub systems such as: Water treatment facility, Boilers, Gas turbines and power plant auxiliaries. Technical background includes all kinds of maintenance and turn around jobs. Planning and organizing jobs with technicians in risk areas in accordance with work permit and hazardous areas safety regulations. Commissioning and witnessing of control systems. Well versed in P&I drawings, Relay Logic, Interpret location drawings and Hook-up, Pre-startup with production teams.

Calibration, Installation, Loop checking and commissioning of Electronics and Pneumatics Instrument as per ISO standard procedure.

Work with latest protocol and solid domain knowledge of handling instrumentation such as: Foundation Field Bus and HART communicators and different types of field test instruments and equipment.

Having good experience with DCS and PLC systems like YOKOGAWA and HONEYWELL.

Field Instruments of HART, Foundation Field Bus and network data transmission.

Working on different types of pressure and flow smart transmitters (like Rosemount, Khrone, GE, Honeywell, Taylor, Yokogawa). Different types of level transmitters like D/P type, Displacer type, Radar type, Capilliary type, Air purge and bubbler types (like Masoneilan, Yokogawa, Magnetron, Enders and Hauser, ABB and Micro motion). Different types of switches like Flow, Level, Pressure and Temperature (like Delta, Bailey and Ashcroft). Working with different types of Final Control Element with Smart positioners (like Fisher, Foxboro and Masoneilan). Also familiar with different types of motor operated valves (like GE and SIEMENS). Knowledge in installation and testing of Vibration Monitoring System specially in Bently Nevada.

I have knowledge of bench and field calibration by using Druck, Emerson source & measuring calibrator, Hart communicator and Ametek pressure and temperature calibrator.

Working with shut-down activities like Preventive Maintenance (PM) jobs such as calibration, loop checking, control valve overhauling & calibration, stroke checking.

Responsible in supervising and hands-on works in installations of instruments, inspection of work quality and mentioned conformity with project standards and specifications.

Also work on Fire & Gas System (Detcon & Honeywell). Installation, Loop Checking, Pre-commissioning, Commissioning.

Works with H2S detectors, flame & fire detectors, smoke detectors, UV & IR sensors, heat detectors, CO, CH4, O2 sensors & detectors, combustible gas detectors, hydro carbon leak detectors, Gas tester & gas alert monitors with recognized gas testing systems.

Seminars and Trainings Attended:

Date Title Location

Mar. 2013 SAUDI ARAMCO, KPI SAFETY COURSE SAUDI ARAMCO, SHAYBAH NGL PROJ.

Dec 2003 Diesel Power Plant operation Northern Mindanao

Aug 2002 Non Destructive testing NPC-STPP

Apr 2003 HSE Awareness NPC-MMRC

Mar 1998 ISO 9000 TQM Awareness Seminar NPC-MMRC

Aug 1997 5’S Awareness Seminar NPC-MMRC

Aug 1996 Fundamentals of Power plant operation NPC-HRTDD

Feb 1996 Pneumatic for low cost Automation SMC-Pneumatic Inc.

Nov 1994 Electro-technology Instr. and Control SIEMENS Phils.

May 1994 Bailey Network INFI90 Optr interface Sys NPC-MMRC

May 1988 Fire Brigade Training Course NPC HR-OD

Education:

Level Degree School

TERTIARY - B.S. in Aeronautical Engineering PATS College of Aeronautics

SECONDARY - High School Piodel Pilar Educ. Inst.

ELEMENTARY - Elementary Makati Elementary School

Personal Information:

Nationality - Filipino

Date of Birth - September 18, 1959

Marital Status - Married (4 children)

Driving Licenses - Philippines / Saudi Arabia Drivers License No.8645961 (Exp.13/02/2018)

Residence Permit- Saudi Arabia Residence I.D. No.234*******

Passport No. - P2647478A / issued on: Apr.09, 2017 / expire on: Apr.08, 2022

QATAR RESIDENCE PERMIT NUMBER- 25960805919, expiry date: 01-Dec-2017

References:

Name POSITION COMPANY

Andrea Quaranta Commissioning Manager SADELMI Power (QAPCO)

+97455569514

Ramon Villegas Vice President- Power Co. Renewable Energy Co./ IPP

+639186222751

Gregorio Cepe Electrical Engineer Transmission Co. Phil.

+639215201882



Contact this candidate