Electrical Maintenance
Resume:
*** ***** ****, ******** ** • 615-***-**** • ************@*****.***
David Price
*** ***** ****, ******** ** 37183 • 615-***-**** • ************@*****.***
David Price
Profile
** ***** ** ***erience as professional maintenance supervisor. Ability to direct complex projects from concept
to fully operational status. In the health care as Director of Operations and hotel industry as Chief Engineer,
which includes provides supervision to subordinates in the operation of high-pressure water tube boilers ranging
from 10,000 lbs. per hour to 25,000 lbs. per hour with associated equipment; air conditioning equipment
operation and maintenance and refrigeration equipment operation and maintenance. In addition, responsible for
providing technical expertise in the operation, repair and preventive maintenance to a variety of refrigeration,
heating and air conditioning and ventilation systems which include centrifugal and reciprocating chillers, energy
control center, environmental hoods, exhaust fans, air handlers and associated equipment.
E xperience
2008 - Present
Self Employed Wartrace, TN
HVAC Maintenance
Troubleshooting and repairing of a wide range of equipment, such as air conditioners, electrical wiring and
electric lock system, gas boiler, circulating pumps. Carpentry, painting, plastering, plumbing, and landscaping.
1/12/08 – 8/08 Select Specialty Hospital Nashville, TN
Director of Operations/Engineering– Full-Time 40 Hours & on call emergency
Overall operation of the facility maintenance management inclusive of administrative and technical
operation.
Utilizing effective planning, organizing, directing, coordinating, and controlling mechanisms.
Ensures that efficient and effective services are provided while enhancing attainment of individual
personnel and hospital objective.
Schedule maintenance on repair, preventive, replacement and new installations includes:
AIR CONDITIONING: Install and maintain a variety of air conditioning systems that
provide for heating, cooling humidifying, dehumidifying, etc., and expected to recognize the cause of
faulty equipment and make repairs to HVAC building management system for optimum performance.
Operates the multiple-zone air conditioning plant consisting of several centrifugal cooling towers with
a capacity of approximately 3,000 tons with close loop water heat pump/cooling tower and other air
conditioning components such as condenser water systems, chilled water circulating systems and large
air handling units that provide heating, ventilation, filtering, humidification and cooling to the entire
medical center.
Able to start, stop, and adjust all of the air conditioning equipment as needed in order to maintain
required conditions
Makes hourly inspections of all operating equipment and records all findings such as compressor
pressures, refrigeration temperatures, water temperatures, oil pressures, volt and ampere readings and
other information pertinent to the safe and efficient operation of the equipment;
Checks and adjusts room temperatures and air handling unit temperatures as needed.
Performs operational checks on all equipment after repair and preventive maintenance;
Effectively functions on the designated Energy Management Computer System in order to shut down
equipment or systems to make repairs, correct problems, and check for proper operation of alarms.
Work involves the adjustment and replacement of multi-level pressure reducing valves that feed steam
to equipment.
Alert to pre-alarm and alarm conditions to respond accordingly to prevent damage to expensive
systems that serve critical patient care areas and to prevent down time;
Adjusts, monitors and repairs steam operated hot water heaters located in equipment rooms remote
401 Potts Road, Wartrace TN • 615-***-**** • ************@*****.***
David Price
from the boiler plant and maintains and monitors the morgue unit cooler.
ELECTRICAL: Modify, repair, troubleshoot (tracing and locating defects), load and test new
and existing electrical lines, circuits, systems, fixtures, controls and equipment working from building
plans, blueprints, wiring diagrams, engineering drawings and electrical maintenance and repair
manuals.
PLUMBING: Modify, and repair new and existing utility, supply, and disposal systems, such
as sewage, water, oil, and gas distribution systems, and fixtures and equipment. However, working
from building plans, blueprints, work orders, and sketches to plan and lay-out routing, placement, slant,
slope, fall, and proper operation of new and existing systems and equipment.
PAINTING: Response to work orders and/or oral instructions. Plan and determine the
methods, techniques, devices and materials needed to paint interior and exterior structures, equipment,
furnishings, etc. However, prepare all surfaces to be painted by sanding, scraping, cleaning, and filling
cracks or holes with putty or wood filler to build up, shape, and level surfaces.
CARPENTRY: Construct and repair a wide variety of structural items such as building
frames, rafters, concrete forms, walls, staircases, door and window frames, interior and exterior trim,
and miscellaneous items such as workbenches, counter tops, bookcases, equipment cabinets, computer
consoles, and items requiring limited decorative trim and molding.
PIPEFITTING: Modify, repair and maintain new and existing heating, water, septic and drainage
systems as well as high-pressure air, high and low pressure steam, gas and chemical systems.
Ability to read and interpret blue prints.
Knowledge of record keeping and cost estimating.
Ability to communicate tactfully and effectively with patients, employees and guest.
Upkeep emergency generator, air handler, electric lock system, gas boiler and circulating pumps.
11/2001-4/2007
NHC Adams Place HealthCare Murfreesboro, TN 37129
D irector of Operations – MAINTENANCE
Plan, direct and supervises maintenance program in HVAC, plumbing, water, gas, electrical,
mechanical, oxygen, communications, carpentry, painting, plastering, ground care and institutional
equipment.
Schedule maintenance on repair, preventive, replacement and new installations includes:
AIR CONDITIONING: Install and maintain a variety of air conditioning systems that
provide for heating, cooling humidifying, dehumidifying, etc., and expected to recognize the cause of
faulty equipment and make repairs to HVAC building management system for optimum performance.
Operates the multiple-zone air conditioning plant consisting of several centrifugal cooling towers with
a capacity of approximately 3,000 tons with close loop water heat pump/cooling tower and other air
conditioning components such as condenser water systems, chilled water circulating systems and large
air handling units that provide heating, ventilation, filtering, humidification and cooling to the entire
medical center.
Able to start, stop, and adjust all of the air conditioning equipment as needed in order to maintain
required conditions
Makes hourly inspections of all operating equipment and records all findings such as compressor
pressures, refrigeration temperatures, water temperatures, oil pressures, volt and ampere readings and
other information pertinent to the safe and efficient operation of the equipment;
Checks and adjusts room temperatures and air handling unit temperatures as needed.
Performs operational checks on all equipment after repair and preventive maintenance;
Effectively functions on the designated Energy Management Computer System in order to shut down
equipment or systems to make repairs, correct problems, and check for proper operation of alarms.
Work involves the adjustment and replacement of multi-level pressure reducing valves that feed steam
to equipment.
Alert to pre-alarm and alarm conditions to respond accordingly to prevent damage to expensive
systems that serve critical patient care areas and to prevent down time;
Adjusts, monitors and repairs steam operated hot water heaters located in equipment rooms remote
from the boiler plant and maintains and monitors the morgue unit cooler.
401 Potts Road, Wartrace TN • 615-***-**** • ************@*****.***
David Price
ELECTRICAL: Modify, repair, troubleshoot (tracing and locating defects), load and test new and
existing electrical lines, circuits, systems, fixtures, controls and equipment working from building
plans, blueprints, wiring diagrams, engineering drawings and electrical maintenance and repair
manuals.
PLUMBING: Modify, and repair new and existing utility, supply, and disposal systems, such as
sewage, water, oil, and gas distribution systems, and fixtures and equipment. However, working from
building plans, blueprints, work orders, and sketches to plan and lay-out routing, placement, slant,
slope, fall, and proper operation of new and existing systems and equipment.
PAINTING: Response to work orders and/or oral instructions. Plan and determine the methods,
techniques, devices and materials needed to paint interior and exterior structures, equipment,
furnishings, etc. However, prepare all surfaces to be painted by sanding, scraping, cleaning, and filling
cracks or holes with putty or wood filler to build up, shape, and level surfaces.
CARPENTRY: Construct and repair a wide variety of structural items such as building frames, rafters,
concrete forms, walls, staircases, door and window frames, interior and exterior trim, and miscellaneous
items such as workbenches, counter tops, bookcases, equipment cabinets, computer consoles, and items
requiring limited decorative trim and molding.
PIPEFITTING: Modify, repair and maintain new and existing heating, water, septic and drainage
systems as well as high-pressure air, high and low pressure steam, gas and chemical systems.
• Ability to read and interpret blue prints.
• Knowledge of record keeping and cost estimating.
• Ability to communicate tactfully and effectively with patients, employees and guest.
• Upkeep emergency generator, air handler, electric lock system, gas boiler and circulating pumps.
2000-2001
Garden Plaza Hotel Murfreesboro, TN
M urfreesboro, TN
Plan direct and supervises maintenance program in HVAC, plumbing, water, gas, electrical,
mechanical, oxygen, communications, carpentry, painting, plastering, ground care and institutional
equipment.
Schedule maintenance on repair, preventive, replacement and new installations.
ELECTRICAL: Modify, repair, troubleshoot (tracing and locating defects), load and test new
and existing electrical lines, circuits, systems, fixtures, controls and equipment working from building
plans, blueprints, wiring diagrams, engineering drawings and electrical maintenance and repair
manuals.
PLUMBING: Modify, and repair new and existing utility, supply, and disposal systems, such
as sewage, water, oil, and gas distribution systems, and fixtures and equipment. However, working
from building plans, blueprints, work orders, and sketches to plan and lay-out routing, placement, slant,
slope, fall, and proper operation of new and existing systems and equipment.
PAINTING: Response to work orders and/or oral instructions. Plan and determine the
methods, techniques, devices and materials needed to paint interior and exterior structures, equipment,
furnishings, etc. However, prepare all surfaces to be painted by sanding, scraping, cleaning, and filling
cracks or holes with putty or wood filler to build up, shape, and level surfaces.
CARPENTRY: Construct and repair a wide variety of structural items such as building
frames, rafters, concrete forms, walls, staircases, door and window frames, interior and exterior trim,
and miscellaneous items such as workbenches, counter tops, bookcases, equipment cabinets, computer
consoles, and items requiring limited decorative trim and molding.
PIPEFITTING: Modify, repair and maintain new and existing heating, water, septic and
drainage systems as well as high-pressure air, high and low pressure steam, gas and chemical systems.
AIR CONDITIONING: Install and maintain a variety of air conditioning systems that
provide for heating, cooling humidifying, dehumidifying, etc., and expected to recognize the cause of
401 Potts Road, Wartrace TN • 615-***-**** • ************@*****.***
David Price
faulty equipment and make repairs to HVAC building management system for optimum performance.
Ability to read and interpret blue prints.
Knowledge of record keeping and cost estimating.
Ability to communicate tactfully and effectively with patients, employees and guest.
Upkeep emergency generator, air handler, electric lock system, gas boiler and circulating pumps
Education
1/2006 – 12/2006
Tennessee Vo-Tech Murfreesboro, TN
Technical Certificate
Electrical Engineering
1979
Duling School Jackson, MS
Certifications
EPA I and II
EPA III (Universal)
Pool Certification
Aerial Work Platforms
References
References are available on request.
401 Potts Road, Wartrace TN • 615-***-**** • ************@*****.***
David Price
References
Select Specialty Hospital – Office of Human Resources 615-***-****
Andrew Adams, Health Administrator - National HealthCare Corporation – 615-***-****
Garden Plaza Hotel – Office of Human Resources - 615-***-****
Thomas Crick, Davidson County School Maintenance Supervisor (Retired) – 615-***-****
Contact this candidate