Project Engineer

Saeed M.BEIGI

No.*, Aliabadi Alley, Hosseini Nejad Alley, Shahid Madani St., TEHRAN, IRAN

(T) +98-21-881***** (C) +98-912-******* (E) **********@*****.***

Summary of Qualifications

•

About 8 years of Process Engineering Experience, specialty in Oil & Gas EPC projects

(offshore/onshore), involved in conceptual, FEED, basic, and detailed design, and also experience

with leading a team of five process engineers as process department lead

• Extensive process design experience, including process simulation, development of PFD's and P&ID's,

Sizing of all major types of process equipment (Separators, rotary equipment, towers, etc.), data

sheets, hydraulic design, duty specifications, Process Descriptions & Philosophies and other process

related documents

• Extensive experience on design, simulation and equipment sizing of gas treating units including

Amine treating, dehydration, NGL extraction, fractionation and condensate stabilization units

• Proficiency in most process engineering softwares including: HYSYS, PROVISION, PROMAX, Flaresim

etc., and hydraulic calculators: PIPEPHASE, PIPENET FLARENET, etc.

• Professionally involved in process safety design considering environmental aspects including

HSE studies, process safety analysis with extensive experience on pressure relief studies,

depressurization studies and design of Flare networks, PSVs, Flare stack sizing calculations including

radiation and emission studies

• Deep hands on experience in safety concepts including PHAST Studies, Consequence Analysis, and

excellent working knowledge with HAZOP, HAZID, QRA, and SIL assessment

• High working knowledge in advance process control system, and ESD C&E development

• Well familiar with design, simulation, sizing of all equipment of Tri Ethylene Glycol (TEG)

dehydration units

• Well working knowledge in using API, NFPA, GPSA, Shell DEPs and NACE Codes and Standards, and

etc.

• Excellent team spirit and capable of interacting effectively with other discipline engineers and with

other departments, and Excellent experience in team working

• Ability to use applied research and problem solving skills to support learning as well as lifelong

personal and professional development

• Great ability to perform multi task and meet deadlines

• Immense flexibility handling a variety of tasks and shift priorities simultaneously

• Great inter personal skills; and comfortable working effectively both independently and in a team

environment

• Proficient with Microsoft Office software collection (i.e., Word, Excel, PowerPoint)

Professional Experience

06/2012 Current Rahbord Energy Design & Development Engineering Co. TEHRAN IRAN

Position: Process Lead Engineer (www.rahbordeng.com)

Responsible for leading process team of including 5 process engineers to produce process deliverables,

and helping to achieve the milestones in various running oil & gas projects, scheduling, man hours

estimation, and programming with reporting the accomplishments to Process Director, and Engineering

Manager and sometimes Managing Director.

Qeshm Oil Production Unit Project (EPC Project):

• Highly involved in generation of process deliverables including: Oily water treatment package process

specification / chemical injection calculations / PFD & PID / ESD Cause & Effect development / process

control philosophy / ESD philosophy/ Operating Manual and finally dealing with getting final approval

for the generated documents from main client (Iranian Offshore Oil Co.)

• Highly involved in performing PSV sizing / PVSV load calculation / filling process data for control

valves/gas dispersion study for locating burn pit and cold vent stack / VENDOR document review for

approval (part of the equipment are installed at site and some of the are under construction at shop) /

IDC Activities within own and other discipline

• Effectively participating in VENDOR Client technical meetings/3D Model Review to expedite process

activities and finalize the process deliverables to get Approval for Construction

1 of 3

Hengam Gas Treatment & Dew Point Control Unit Project (FEED and Detail, EPC Project):

• Performing Simulation of Whole Plant with PROMAX and Sizing Most of the equipment including

Absorber and Regenerator towers, Amine Storage Tanks during FEED phase, the accomplishment was

fully endorsed by APS Engineering Company Roma during FEED endorsement.

• Supervision on APS Co. process activities during detail design and attend progress meetings with client

and VENDORS to close process activities and get to construction.

Nowrooz Offshore Well Head Platform Project (FEED):

• Highly involved for Master Document List (MDL) preparation, scheduling and man power estimation,

and producing core philosophies including Process Design Criteria, Isolation/Venting/ Depressurization

/ Drainage Philosophies to get main client approval to start the next phase of project.

This purpose of this project is to do FEED for new wellhead and production platform and one subsea

pipeline, as a new extension on Shell previous project in Nowrooz Offshore. Before starting the job

shell engineering documents on Nowrooz platform completely reviewed to report questions and

inconsistencies.

12/2008 – 06/2012 IRITEC (Iran International Engineering Co.) TEHRAN IRAN

Position: Senior Process Engineer (www.iritec.com)

In Kharg Island NGL Plant EPC Project (Mega Project), I was responsible for leading and coordinating

process engineering activities for AGR & DMR Unit, LPG Storage & Loading Facilities, and Sea Water Intake

Unit, the responsibilities reported to Process Manager and Engineering Manager. And also assisting for

team technical proposal preparation as another activity.

Attend weekly progress meetings with other members of the Development team and ensure that process

problems and requirements that need input from other disciplines and departments are fully explained

and expedited.

Acid Gas Removal (AGR) & Dehydration and Mercaptan Removal (DMR) Unit project:

• Responsible for full Process coordination (e.g.: PID/3D model review/technical meetings and etc.)

during basic design package preparation by licensor (Shell Co.) as conceptual study phase, and basic

and detailed design activities by APS Co.

• Review for approval: QRA studies, PFD & PID, process datasheets, ESD Cause & Effect, thermal design,

relief load, and all other process calculations/deliverables

• Involved in developing/generation of: Gas Sweetening Design Guide, Tender Package preparation for

SWT Unit (including performing Process Simulation, PFD & PID generation, Process Datasheets

preparation), Air & Nitrogen generation package duty spec development, and Air Cooler sizing

• Fully involved in checking NGL extraction and fractionation simulation by TDE Co. as sub contractor

LPG Storage/Loading facilities/Sea water intake Unit Project:

• Attended HAZARD identification meetings for LPG storage, BOG system, loading facilities/

performance test of cryogenic pumps at vendor factory in TOKYO as IRITEC representative for design

verification to finally report to process manager.

• Review for approval: RAM study, process datasheets, pump hydraulic calculations, Hypochlorite

generator package VENDOR documents

• Fully involved in performing flare network analysis and calculations for LPG Storage tanks

08/2008 – 12/2008 Paravar Engineering Co. TEHRAN IRAN

Position: Senior Process Engineer (www.paravar eng.ir)

Lavan Island Gas Wellhead Facilities & Fuel Gas Transmission Line (Detailed Design) as a fast track

project:

This project was a fast track activity in which I was assigned to lead a team of 2 process engineers and

responsible to hand over process deliverables to project manager to meet project deadlines, the

mainstream responsibilities included:

• Team Planning, Coordination and Interface Management

• FEED endorsement report preparation

• Master Document List preparation, process man power estimation, and fully involved in process

simulation / PFD & PID production / PSV loads calculations / flare system design & analysis / ESD Cause

& Effect development / duty spec preparation for: flare package & gas conditioning system / methanol

injection rate calculation / flare K.O drum sizing / depressurization calculations / 2&3 phase separator

sizing / pump hydraulic calculation/Line list preparation/Transmission pipeline & Line sizing

calculation/site visit and attend in technical meeting with client (Iranian Offshore Oil Co.) to get final

approval for generated documents

2 of 3

11/2006 – 08/2008 Sazeh Pardazi Iran Consulting Engineers Co. TEHRAN IRAN

Position: Process Engineer (www.sazehpardazi.ir)

The defined responsibilities reported to process discipline head, within the following projects:

New LPG & Condensate Loading Facilities on Sirri Island Jetty Project (Detail design):

• Perform Process Simulation / PFD & PID Review / PSV Load Calculation & Sizing / Vessel Sizing/

Process datasheet preparation / flare K.O Drum Sizing / participating in HAZOP meeting as a scribe

Offsite Phase II Petrochemical Zone (Assaloyeh) Project:

• Pipe Hydraulic Calculation / Pipe Network Analysis / Utility and Process Line Sizing / Flare stack sizing /

Flare Header Sizing / Flare Radiation Calculation (Spreadsheet Preparation and Programming) / Flare

Arrangement Criteria & Flare Design Criteria Preparation / Toxic & Flammable Gas Dispersion Study

• Fire Water Demand Calculation / ATM Tank Design / Process Simulation / Offsite Feed & Product PFD

Development / Fire Water Ringmain Calculation & Analysis (by Pipenet)

During the Basic Design, lay out for flare stacks followed according to my underpinning

calculations/reports

08/2004 – 08/2006 Radha Engineering and Management Consultant Co. TEHRAN IRAN

Position: Process Engineer (www.radhaco.com)

The following assigned tasks were reported to Engineering Manager within the following project:

Acetic Acid Pilot Plant Project:

• Review for comment: PFD & PID / Process Description/ Process Datasheet / Instrument Datasheet,

perform process calculations (e.g.: line sizing, HMB, equipment sizing, and etc.)

• Study for corrosion in acetic acid plant heat exchangers / surface condenser thermal design / pump

hydraulic calculation/ separator sizing & thickness calculation

Technical Proposal Preparation for Tehran Oil refinery’s Pump & Steam Turbine Project:

• Preparation of process datasheet

• Getting VENDOR technical and quotation proposal / VENDOR document review for finalization

Nar Gas Compressor Station Project:

I have been worked as Radha Employee in Farab Co. office as Piping/Process Engineer:

• Coordination of process activities, P&ID Review, Piping Design by PDMS Software (under supervision of

piping lead), assisting for piping material specification (PMS) revision, piping MTO & Isometric plans

preparation

Education

Sharif University of Technology TEHRAN IRAN

2003 2005

M.Sc in Chemical Engineering

Iran University of Science & Technology TEHRAN IRAN

1998 2003

B.Sc in Chemical Engineering

Training Courses

•

Acid Gas Sweetening Unit Simulation by PROMAX

• PHAST Study & Consequence Analysis

• SIL assessment

• QRA Study

• Control Valve Sizing

• PDMS

• Ceasar II

Languages

Persian (native), English (advanced), French (Intermediate)

3 of 3

Contact this candidate