Engineer Manager
Resume:
ANINDAM BISWAS
Mobile: +919*********/+919********* ~ E-Mail: *******.**@*****.***
Seeking assignments in Detail engineering, System Engineering or Project
Management with a growth oriented organisation of repute.
PROFESSIONAL SYNOPSIS
< A hard working professional over 2.8 years of experience in Industrial
Automation field in System Designing, Engineering, Installation &
Commissioning.
< Presently associated with Honeywell Automation India Ltd., as Project
Engineer.
< Experienced in handling DCS (Distributed Control System) project in Oil
Refinery (IOCL).
< At present working on C300 Controller and Safety Manager.
< Experienced in handling QCS (Quality Control System) projects in Pulp &
Paper Industries.
< Well versed with erection and commissioning of Scanners, Sensors, and
various Quality Control Systems (Calcoil, Autoslice, and ProFlow
Actuators) of Honeywell.
< Handful experience on Experion, DaVinci and MxProline.
< A self-learner and possess strong troubleshooting abilities.
EMPLOYMENT SCAN
Since July'08 with Honeywell Automation India Ltd., Pune as Project
Engineer
Key Responsibilities:
> Review of customer inputs for design and detail engineering
development.
> Work within budgeted Man hours. On Time Delivery of engineering
deliverable to internal / external customer.
> Preparation of work packages related to Design and Detail Engineering
and project deliverables under supervision of Lead Project Engineer as
per customer scope. Completion and closure of sites as per schedule.
> Pre-commissioning and commissiong activity as per the project plan
schedule. Support to PM / site team to get the retention / liquidation
of money.
> Develop appreciation of customer expectations and completely own the
quality of engineering deliverables being provided to customer. No
Negative impact (Feedback) in the eyes of the customer on Team's
execution.
> Comply to HSE policy and cardinal rules and support awareness
improvement among pears and associates. Near miss reporting for the
group. At the beginning of each workday inspect work areas for
potential HS&E hazards. Report and correct any problems immediately.
Technical Skills:
< System architecture and designing of automation systems (consisting of
Process Control and Safety Systems)
< Complete designing of automation system on Honeywell EPKS R301/310
systems, Honeywell Safety Manager R131.5.
< Development and Review of Control functional logics and Protection
logics.
< Implementation of logic and HMI screens in DCS/PLC/SCADA.
< Erection and Commissioning of DCS/PLC/SCADA systems.
< Loop checking and Configuration of channels according to IO assignment.
< Preparation of IO assignments, JB schedules, Cable schedules, BOMs (Bill
of Material), HDM (Hardware Design Manual), SDM (Software Design Manual).
< Experienced in designing System Cabinets, Marshalling Cabinets and PDB
cabinets.
< Installed and Commissioned Scanners and sensors used in Quality Control
of Paper.
< Skilled in mechanical alignment of Calcoil and installations of Autoslice
and ProFlow Actuators.
< Experienced in preparation of Cable schedules, Wiring Drawings for
sensors, scanner frame and CD (Cross Direction) control Actuators.
< Configuration of QCS server according to customer requirements.
< Experienced in MD (Machine Direction) tuning.
PROJECTS HANDLED
1) DCS Package for DHDT in IOCL, Bongaigaon (Assam) (2010-11) [Ongoing
Project]:
i) Presently commissioning the DHDT (Diesel Hydrotreating Unit), HGU
(Hydrogen Generation Unit) and SRU (Sulphur Recovery Unit) of IOCL,
Bongaigaon.
ii) Designing of complete system & network architecture consisting of DCS,
ESD, 8 nos. of C300 Controllers, 3 Redundant Safety Manager PLC, 2 nos. of
Redundant EPKS Servers, 16 nos. of Operator Stations and approx 7500 IOs.
ii) Installation of Marshalling & System Cabinets of DCS & ESD.
iii) Terminations inside the Cabinets, power-on of Cabinets & hot loop-
checking.
iv) Logic building and correction of logics in DCS & ESD according to
customer requirements.
v) Preparation of Graphics in HMI Web Builder according to P&ID.
2) QCS installation and commissioning done in Pulp and Paper plants of:
a) Andhra Pradesh Paper Mills (PM#5), Rajahmundry (2009) [Replacement of
ABB Scanner]
b) Ballapur Industries Ltd. (PM#6), Ballarshah (2009) [Replacement of ABB
Scanner]
i) Installation, alignment and calibration of Scanners.
ii) Preparation of Cable Schedule, Wiring drawings and completion of wiring
for Scanner & sensors.
iii) Installation, mechanical alignment and wiring for Calcoil.
iv) Commissioning of Sensors (Basis Weight, Moisture, Ash and Caliper)
v) Data correlation with Lab values.
vi) Machine Direction (MD) tuning.
vii) Training of Engineers and operators for operation and maintenance of
the system.
c) Servalakshmi Paper Private Ltd., Tirunelveli (2010)
i) Installation, alignment and calibration of Pope Reel Scanner and Size
Press Scanner
ii) Preparation of Cable Schedule, Wiring drawings and completion of wiring
for both Scanners & all the sensors.
iii) Installation and wiring of Autoslice (Basis weight CD control)
iv) Commissioning of Sensors (Basis Weight, Moisture, Ash and Caliper)
v) Data correlation with Lab values.
vi) Machine Direction tuning.
vii) Training of Engineers and operators for proper operation and
maintenance of the QCS system.
d) Andhra Pradesh Paper Mills (PM#6), Rajahmundry (2010)
i) Installation, alignment and calibration of old Pope Reel Scanner and
Size Press Scanner
ii) Preparation of Cable Schedule, Wiring drawings and completion of wiring
for both Scanners & all the sensors.
iii) Installation and mechanical alignment and wiring of Calcoil.
iv) Commissioning of Sensors (Basis Weight, Moisture, Ash and Caliper)
v) Data correlation with Lab values.
vi) Machine Direction tuning.
vii) Training of Engineers and operators for proper operation and
maintenance of the QCS system.
e) Raman Boards, Mysore (2010)
i) Installation of ProFlow Dilution System.
ii) Preparation of Cable Schedule, Wiring drawings and completion of wiring
for the system.
iii) Communication establishment with the actuators.
iv) Training of Engineers and operators for proper operation and
maintenance of the QCS system.
3) AMC (Annual Maintenance Contract) visits made at BILT-Ashti (2009 &
2010):
i) Troubleshooted and solved problems relating to Caliper and Moisture
sensors.
ii) Corrected Calcoil mechanical alignment
iii) Repaired Calcoil power modules.
4) Emergency visit made at TNPL (2010):
i) Attended problems relating to SSIR scanner
ii) Solved Color sensor problems
5) QCS installation and commissioning done in Polyester and Polyfilm plants
of:
a) Jindal Polyfilms Ltd., Nasik (2009)
b) UFLEX Ltd., Noida (Upgradation) (2009)
c) Polyplex Ltd., Khatima (Upgradation) (2009)
i) Installation of Grateful Scanners.
ii) Alignment of Scanners.
iii) Upgradation from old wirings into new wirings in Upgradation projects.
iv) Upgradation from DC to AC motors.
v) Commissioning of Sensors.
vi) CD tuning.
6) DCS projects of West Coast Paper Mill, Dandeli and Bindal Paper Ltd.,
Muzaffarnagar (2008):
i) Successful installation and commissioning of FAT test setups.
ii) Preparation of IO assignments, JB schedules, BOMs, HDM & SDM.
iii) Designing of Cabinets (System, Marshalling and PDB).
iv) Hot Loop checking of HLAIs, AOs, DIs and DOs.
v) Configuration of channels according to IO assignment and
vi) Building of logics of different units in Experion PKS.
TRAINING
< Classroom training on Experion PKS Server & Controller and Safety Manager
PLC (After joining Honeywell as Graduate Engineer Trainee).
< Vocational Training at IIATCA (PLC Training) (After 3rd yr, B.Tech).
< Vocational Training at Tinplate Company of India Ltd, Jamshedpur (After
2nd yr, B.Tech)
ACADEMIC QUALIFICATIONS
2008 B.Tech. (Electronics & Instrumentation Engineering) from W.B.
University of Technology
DGPA: 7.35/10
CO-CURRICUALARS
< Took active participation in arranging college fests for 2 years.
< Take part in Blood Donation camps.
< Playing Carrom.
PERSONAL DOSSIER
Date of Birth : 21st January 1985
Current Address : Flat no. 104, H1 wing, Vanaraji heights, MIT
College Road, Kothrud, Pune- 411038.
Office Address : Honeywell Automation India Ltd., 56&57 Hadapsar
Industrial Estate, Hadapsar, Pune- 411013
Permanent Address : Lichu Bagan, Purbayan, Manaspur Road, P.O. -
Sahaganj, Hooghly- 712104.
Passport No. : G2015294.
Current Salary : Rs 401624 per year excluding travelling
allowances.
Expected Salary : Rs 550000 per year excluding bonus and
allowances.
6000$ per month excluding
bonus and allowances.
Contact this candidate