Electrical Engineer
Resume:
Dear Sir
I have been working in the oil and gas field for about 12 years. My
interest in oil & Gas industry started after my graduation when I began to
look for a carrier at an oil & Gas company.
The chance came when I was appointed as an electrical maintenance engineer,
Rashid petroleum Company in Egypt. I gained much experience in carrying out
the different activities appointed to me in the different plant facilities
in the onshore fields, offshore platforms, marine ports and metering &
exports terminals.
My responsibilities included participating and supervising the different
Operation and maintenance activities (preventive, predictive & corrective
maintenance) of the electrical equipments including generators, motors,
transformers, HVAC, lighting, gas turbines, diesel engines,
switchgears...etc then feeding back in our computerized maintenance
management system (CMMS). I was also responsible for supervising the
different taskforces, carrying out toolbox talks and risk assessment and
job safety analysis managing to optimize the required manpower and maintain
their own safety as well as securing the company's assets' integrity and
improve its equipment reliability.
After two years, I as appointed as a senior authorized electrical personnel
(SAEP) responsible for the maintenance and operation of the higher voltage
levels of the power system.
Then in 2004 I had the chance, as a part of the operation team, to
participate in the company's new project (Scarab/Saffron) the first gas
production from the deep water in the Middle East. The project was
implemented by the major design and construction companies in the world. I
was part of a team responsible for reviewing the project specifications,
preliminary design and follow up the construction works onsite and if
required raise the required punch lists and site queries on behalf of the
operation team. Then I had the chance to participate in the preparation of
the black start procedure of the plant. Finally, I was a part of a team
responsible for the preparation of the maintenance inspection work
instruction (MIWI) of the plant's electrical equipments.
Then in 2005 I had the chance to achieve the same role in the plant new
facilities in simian, sienna and sapphire then in the phase 2 of Rosetta
fields.
I had had the honor to be a part of the plant operation team reaching a
production record of more than 2500 MMSCF/D and a record of 9 million man
hours without ant lost time injury (LTI).
I was then transferred to the Egyptian LNG (A major multinational gas
liquefaction Co.) where I was appointed as an electrical engineer.
Finally, I shifted my career towards the Gulf region in the year 2008 to
join ZADCO as one of the major oil fields of ADNOC (UAE) as an electrical
engineer in the Maintenance support Department of ZIRKU Island producing
oil over 800,000 BPD.
I do believe that I can contribute to success of your reputable company.
Sincerely yours,
Tamer A. El Shazly
ELECTRICAL ENGINEER
CURRICULUM VITAE
TAMER AHMED MAHMOUD EL SHAZLY
BEHIND 75 EL GEISH WAY, SPORTING, ALEXANDRIA, EGYPT
TEL: + (971-**-******* / +(20-114-******* / + (20)35776234
**********@*****.***
CARRER OBJECTIVES
A challenging position in a remarkably reputed organization, which leads to
a well-planned career that utilizes my experience, upgrades my abilities
and stimulates my ambitions.
Key Skills
. Busy, High Volume Environments
. Excellent Written & Verbal Skills
. Excellent Report Writing
. Presentation skills
. Interpersonal Communication
. Mature Team Support & Leadership
. Regulatory Compliance Knowledge
. Time Management & Prioritisation
. Multi-tasking & Organisation
. Team working Capacity
. Positive Nature and Strong Work Ethic
EDUCATION
. BSc. Engineering
. Electrical Department.
. Faculty of Engineering.
. Alexandria University.
. Grade of Graduation: Very Good.
. Date of graduation: May 2000.
LANGUAGES
. Arabic: Mother Tongue
. English: Excellent
. French: Fair
COMPUTER SKILLS
Excellent user of Microsoft Windows, Microsoft Office (Word, Excel,
Access, PowerPoint Microsoft Outlook, Internet browsing,
Graphics programs (AutoCAD, Photoshop, Paint Shop-pro
Computerized Maintenance Management Systems (CMMS (Global Maintenance
Solutions, SAP, and MAXIMO).
Ability to interact with new software and good knowledge of computer
hardware and preliminary troubleshooting.
UNIVERSITY GRADUATION PROJECTS
ELECTRICAL POWER PROJECT: Rehabilitation and expansion of 66/11 kV
substation and distribution network in Alexandria with the following
tasks carried out: data collection, load analysis & load growth, load
flow, short circuit calculations, design of protection scheme and
relay coordination and reactive power compensation on the medium
voltage network.
PROJECT'S GRADE: Excellent
ELECTRICAL MACHINES PROJECT: Computerized design of induction motors
using Hand calculations & Matlab computerized programs.
PROJECT'S GRADE: Excellent
PREVIOUS TRAINING EXPERIENCES
MOBIL OIL: Complete training over the whole production line of Mobil
oil (Mex Terminal-Alexandria) including quality control, system
observation using automatic control systems, wiring, and PLC,
packing, storing system using Hi-Rise, pigeon holes and Cranes
controlled by a computerized system.
CURRENT AND PREVIOUS WORKING EXPERIENCES
ZAKUM Development Company (ZADCO) UAE (04/6/2008 till Now):
Worked in ZADCO (one of ADNOC companies, JV with Exxon Mobil) as an
electrical engineer in the Maintenance support Department on ZIRKU
Island where the main facility of the oil and gas processing exists
prior to oil and gas export.
Duties included giving required assistance the electrical maintenance
and operations team while carrying out major maintenance activities
of the various electrical equipments.
Also supervising the outsourced contractors during projects
implementation, Electrical Equipments installation testing and
commissioning as a part of the electrical power system complete
renovation and refurbishment, ensure proper and safe implementation
of the work done by the contractor as per company issued scope of
work as well as relevant standards and recommended work practices,
raise and coordinate PTW and preparation of JSA.
This includes projects of Packaged S/S replacement, transformers
replacement (Up to 25.6 MVA), New Switchgears, Distribution boards
and cabling installation, low voltage switchgears, UPS's, Battery
chargers replacement, power transformers replacement, analysis and
health check and oil replacement, PCB contaminated oil replacement,
generators refurbishment and repair, Cathodic Protection System
Renovation, Heaters Burner Management System Upgrade, installation
and testing of fire alarming and detection systems, H2S wireless
detection system, new RO units, lighting projects.
Regular feedback of the projects activities and work progress to job
officer and Team Leader in the HQ.
Egyptian LNG (From 20/5/2007 to 1/6/2008):
ELNG is a JV with British Gas (BG), PETRONAS and Gas De France,
Worked as an Electrical Specialist in the maintenance department. My
Duties includes performing as well as supervising the different
maintenance, troubleshooting and planning of all the electrical
related activities. It includes also planning and preparing for the
activities carried out during the process planned shutdown. The
Involved equipments included:
. 4 Gas Turbines (17.2 MVA ISO rated Each, Siemens, 11 KV)
. 8 Substations (11 KV, 3.3 KV and LV distribution switchboards,
ABB Unigear).
. 4 Emergency diesel generators (CUMMINS)
. 3.3 KV motors (for inst air compressors, LNG loading pumps,
Turbo compressors starter motors ...etc).
. About 500 LV motors driving fan coolers and pumps
. 38 step down transformers to the different utilization voltage
levels serving the 8 substations.
. UPS's (C.E.G. Italy) and Battery Chargers (ABB)
Duties also covered analysis of the equipments failure and history,
preparation of purchase requisitions for the 2 years spare parts,
updating the Maintenance work instruction when required and prepare
of maintenance checklist, defining and purchasing the required
electrical tools and special measurement and logging devices,
following up the permit to work system and isolation activities in
the HV switchgears.
I also took part in the team responsible for making a bid for the Gas
turbines service agreement between the OEM and competitive companies.
RASHID PET. CO. (RASHPETCO) EGYPT (From 6/2002 to 20/05/2007):
RASHPETCO is a joint venture with BG, Edison and PETRONAS, a gas
company producing about 40% of Egypt's gas production
Worked as a Senior Authorized Electrical Maintenance engineer (SAEP)
in the company electrical department. This includes maintenance,
troubleshooting and operation of the onshore and the offshore
terminals and facilities as well as the electrical equipments of the
remote export terminals; this covers the preventative, protective and
corrective maintenance of the following equipments:
Gas turbines & Generators:
> Speed controllers' software configuration and maintenance
> Caterpillar, Deutz and Perkins Emergency diesel generators,
control system and generators protection.
> Switchgear operation, protection system and maintenance
> Power and distribution transformers.
> Cathodic protection system
> UPS and chargers
> Other plant auxiliary electrical equipments
V Electric heaters for Natural Gas
V Distributed outlets and welding sockets.
V HVAC units
V Cathodic protection system (Impressed current system).
V Plant earthing network.
> Electrical power analysis and Database tools:
V Power and Harmonic Analyzer
V Transient and power system disturbance analysis.
V Power Quality monitoring & Electrical Data Loggers.
V Electrical Distribution Supervisory system
EXXON-MOBIL EGYPT (from 1/2002 to 6/2002):
Worked as an electrical maintenance engineer for the production line
of Mobil oil (Mex Terminal-Alexandria) including quality control,
system observation using automatic control systems, wiring, and PLC,
packing, storing system using Hi-Rise monitored by an IBM server and
controlled by a SIEMENS PLC, pigeon halls and robots controlled by a
computerized system. Also as a maintenance and instrumentation
engineer in the Automatic Batch Blending (ABB), in-line blending
(ILB) and the In Line Grease Manufacturing Unit (ILGU).
SPECIAL ROLES AND ACHIEVEMENTS
COMPANY MAINTENANCE INSTRUCTIONS & MAINT. STRATEGY ESTABLISHMENT
> Taking part in preparing the MIWI (Maintenance Inspection Work
Instructions) and work method statement for all the electrical
equipments in the plant based on each equipments manufacturer
maintenance manuals and also upon the known electrical standards
and codes of practice (IEE, IEC this includes the steps and
procedures to be followed while carrying out the preventative
maintenance and their duration (Calendar based and running hours
based)
> Taking part in planning all the electrical activities to be
carried out during total plant planned shutdown preparing the
jobs procedures, duration and time frame, required tools and
additional manpower and coordination with the different
disciplines.
> Taking part in the preparation of the procedure required in
transferring the plant projects from temporary power generation
to permanent turbo-generator power supply with minimum process
interruption.
> Assessing and studying the engineering changes of the electrical
system in order to improve the system reliability through the
engineering management procedure and engineering investigation
reports raised to the technical managers.
> Taking part in ordering and following up the two years spare
parts for the plant's electrical equipments.
> Gathering the required documentation and ensuring the
availability of the required information of the electrical system
(Operation and maintenance manuals, drawings, wiring
diagrams...etc).
> Generate new ideas for the technical and department managerial
and manpower organizing issues for the sake of work environment
improvement and maintenance ease.
> Being a part of the plant safety team participating the different
plant safety programs STD (See, Think, do), SAP (Safety awareness
program) and BBS (Behavioral Based Safety).
> Being a part of the company's asset integrity team responsible
for preparing the asset integrity documentation and programs
during the audits.
> Assuring that all the electrical maintenance and corrective
activities are carried out in a safe manner through the permit to
work procedure (preparation of the job method statements, risk
assessment, toolbox talk, proper isolation, lockout and tag out
procedures and issuing electrical permit to works if required.)
> Being part of the electrical activities internal auditing team.
> Carry out on job training for the junior company staff as well as
the electrical performing authorities (Technicians and
supervisors).
> Being a part of the company's stretching emergency response team.
> Certified since 2004 as a senior Authorized Electrical Person
(SAEP).
> Certified by ABB to carry out maintenance and repair for
explosion proof equipments.
CONSTRUCTION ANF PROJECT EXPERIENCE
Shared and supervised the construction, commissioning, Start Up and
the preliminary operation of the BURULLUS project (SCARAB SAFRON
(Main contractor: Deep Marine Concession (DMC) Bechtel, Intec &
Cameroon) & SIMIAN/SIENNA & SAPPHIRE (Main Contractor: Technip)).
This includes:
V Review the early pant design, verify its relevance with the
working standards (IEEE, IEC) and raise required site queries.
V Attending the technical evaluation meeting of the packages
suppliers with the design firm.
V Attending the plant installation and construction works.
V Review the conformity of the plant design with the safety rules
and the related control measures and risk assessment to ensure
that all works are performed within safe conditions to
personnel, company assets and environment.
V Review installation of electrical equipment and raise required
punch lists.
V Reviewed the conformity of the electrical apparatus with
hazardous area classification.
V Attend and taking part in the first gas and start-up of the gas
plant by reviewing the commissioning checklists, clearing
category A items punch list clearing, livening up notice and
review interim and final handover.
V Attending the construction works of the simian/sienna platform
and jacket in petrojet yard in (El Meadeya) carried out by the
main contractor (TECHNIP)
V Attend and approve the Site Acceptance Test of the Electrical
systems ad issue the Livening Up Notice (LUN)
V Being a part of Rosetta plant integration with the new
facilities P2 and P3 and P4 and process tie-ins
V Attending and supervising the electrical activities
construction, start-up and operation of compression station P1A
using two 10 MW GE gas turbines driven 6 stage centrifugal
compressor
V Being a part of the de-bottlenecking project of scarab saffron
to achieve the highest design flow rates.
V Assess and modify, when required, the design philosophy and
equipments specification along the operations lifetime of the
plant electrical system. The engineering modifications are
raised via the Engineering Investigation reporting System (EIR).
V Completing the different project for upgrading and replacement
of major electrical equipments in ZIRKU Island (ZADCO) due to
obscelence, degradation and EOL.
ADDITIONAL QUALIFICATIONS AND ATTENDED COURSES
Being involved in the selection and installation of electrical
apparatus and equipments to be installed in hazardous area locations
i.e. explosion proof electrical equipments (equipments and protecting
systems intended for use in industrial facilities with explosive
atmosphere hazard EX) in classified areas (zones 0 and 1), as well as
judging its conformity with the area in which they are installed
according to relevant international standards and codes of practice.
Attended a 5 days duration course in the selection, maintenance,
failure analysis and condition monitoring of SKF type bearings,
including an additional day for practical practice in SKF workshop.
Attended 6 a days on site training course on the gas turbines theory
of operation, maintenance and troubleshooting held by (the Egyptian
Canadian company).
Attended a 5 days training course in the (Risk assessment) held by
Dr. Hany Raafat (HSE assistant director in Aston University).
Attended a training course in the Arab Academy of Science and
Technology in the following topics: Fire prevention and fighting
onboard offshore units.
Medical first aid.
Personal survival techniques on board offshore units.
Offshore helicopter safety.
Attended an onsite training course in the scarab saffron Subsea
control system (MCS) held by Kvaerner Oilfield Company.
Attended an onsite training course in the pipeline simulation system
(PSS) held by Fantoft process technologies.
Attended an onsite training course in the operation, maintenance and
troubleshooting of Typhoon gas turbines held by Alstom gas turbines.
Attended a training course in the lightning protection of
installations and structures.
Attended a 5 days course in the maintenance and troubleshooting of
PLCs.
Attended a 3 days training in the first aid in the Egyptian Red
Crescent center.
Attended a 3 days training course on the Behavioral based Safety
(BBS).
Attended a 3 days practical training course in the fire fighting
(Suez Petroleum Co.)
Attended a 5 days training course in the design and sizing of
industrial electrical equipment (Held by the northern Alberta
institute of technology)
Attended a 5 days training course in design and installation of
electrical equipment in hazardous areas.
Attended a 5 days training course in the maintenance management and
computerized maintenance management system (CMMS).
Attended a 4 days training course in incident investigation held by
Randy smith Training.
Attended a 2 days training course for the service and repair of EX
motors and generators held in ABB Egypt Premises.
Attended 5 days training course in the industrial fire and gas system
Attended an In-house training in the Safety Management for line
supervisors (Held by DUPONT company)
Attended a 5 days training course in the preventive, predictive and
proactive maintenance and project management basics on Oil & Gas
Training Center.
Attended a 2 days Training course in the technical Report Writing in
IMI Training solution center.
Attended a 3 days training course in the maintenance and
troubleshooting of the Un-interruptible Power Supplies (UPS) held by
MGE UPS.
Attended a 2 days' workshop in the Time Management (FOCUS) held by
LTC Egypt (Franklin Covey)
The Above mentioned courses certificates and relevant document are
available upon your request
MAXIMO 6 Training course (In-house in ZIRKU Island, Abu Dhabi)
Bosiet offshore training (UAE/Abu Dhabi).
Dynamic operational risk assessment and incident command system
(UAE/Abu Dhabi)
PERSONAL INFORMATION
NAME: Tamer Ahmed Mahmoud El Shazly.
ADDRESS: Behind 75 El Geish Way, Sporting, Alexandria, EGYPT.
E-MAIL: **********@*****.***
PHONE NUMBERS:
EGYPT: + (20-114-*******
Work (UAE): +971-**-*******
Home (Egypt): +20 3 5776234.
MARITIAL STATUS: Married with 2 children.
HOBBIES: Reading, Travelling & Sports
[pic]
Tamer A. El Shazly
BEHIND 75 EL GEISH WAY - SPORTING ALEXANDRIA - EGYPT
PHONE +971-**-******* / +20-114-*******
EMAIL **********@*****.***
Contact this candidate