Post Job Free

Resume

Sign in

Electrical Engineer Maintenance

Location:
Theni, TN, 625531, India
Salary:
as per company standard norms
Posted:
February 10, 2011

Contact this candidate

Resume:

CURRICULAM VITAE

Of

VELMURUGAN PANDI

Current location : Abu Dhabi-UAE

Contact No : +971-*********

Passport no : G5025433

Issued at : Trichirapalli

Validity : 19.08.2017

Email Address : z86j6v@r.postjobfree.com

Career Objective:

Desire to work at a challenging and strategic position in a professionally managed, to contribute the success of progressive organization as an Electrical Field Engineer, where I can make best use of my knowledge & experience and increasing levels of responsibility.

Total Year Experience : 15 yrs

Industry Experience:

07years - experience in Installation, Pre-Com& Commissioning in Construction of Oil & Gas, and Power etc.

08years - experience in Operation& Maintenance in Oil & Gas, Power, Industrial, and Petrochemical Projects.

Project Exposure:

For more than 15 years of dedicated work experience in the field of Electrical Engineering with various discipline in Constructions. Works involved in Testing, Pre-Com& Commissioning and Operation& Maintenance of Power Plants Generations, Oil& Gas Industry, Refinery and Water Desalination Plants.

Presently I am working in M/s.GASCO, Utilities and Offsite projects for Gas Treatments, Includes the Power Generations GTG 8x32MW, NGL, Sulfur Storages, Water Treatment, Instrument, Existing Facilities Modification and Cathodic Protection of Pipe lines etc. Carried out Testing, Commissioning and Maintenance of Main and Local Substations of 50MVA-11/132KV, 63MVA-132/33KV, 25MVA-33/11KV, 12MVA-11/3.3KV, and 2.5MVA-11/0.433KV.Before,I was in Saudi Aramo Oil&Gas plants, testing &precommissioning of Substations, of 20MVA-13.8/4.16KV, and 2.5MVA-13.8/0.480KV for Crude Oil Storage, Shipping, Transfer and Gas Train1&2 etc.

In Power Generation Plants of Large Gas & Steam Turbine of CCPP is 2730MW (STG 4x260MW & GTG 8x235MW), Testing & Commissioning of High voltage Substations of 400/220/132KV, 8X310MVA-11/400KV, 2X800MVA, 2X315MVA and Desalination Plants 6.4MIGPD.

Maintenance in Power Blocks 132/13.8KV GIS Substations, Transmission and Distribution systems, EBOP of MV/LV SWGR, Dry Type Transformers, and Cables, MV/LV MCC,PCC, NGR,HVAC,UPS&DC Systems.BOP of Main &Local Substations of MEB1&2, 8XLEBs, 8XBSDGs, 4XHRSGs, Cooling Tower, Water Treatments and Workshops.

Power plants protections scheme checks, MV/LV Protections, Good interpret with SLD, Gas Insulated Switchgear and Substations.

Major overhauling, Trouble shooting in MV/LV Switch Gear Panels, Motors starters& Control Wirings in MCC, PCC& Local Control Panel at Field areas, Inter Connection wiring Diagram, Inter lock circuit, Inter Trip Testing between Main Substations.

COMPUTER BACKGROUND:

Operating System : Windows98 /2000 / XP Professional

Software Exposure : MS-Office, Word, Excel and PowerPoint

PROFESSIONALQUALIFICATION:

Diploma in Electrical and Electronics Engineering from State Board of Technical Education TamilNadu in 1993-1996 with 80%

CERTIFICATION:

Licensed Electrical Supervisor Obtained from CEIG of Tamilnadu, India. “C”L.No: 17240

(Competency certificate accredited by Chief Electrical Inspectorate of Government of Tamilnadu, India for working on HV systems)

ADVANCE CONTROL IN INDUSTRIAL AUTOMATION OF AC/DC DRIVES USING WITH PLC PROGRAMS

Countries and Companies works are included from present:

OVERSEAS:

A. Client : M/s. GASCO (ABU DHABI GAS INDUSTRIES LTD), HABSHAN UTILITIES&OFFSITES PROJECT-IGD5

Company : M/s.HYUNDAI ENGINEERING&CONSTRUCTION CO.LTD

Designation : Electrical Engineer

Period : Dec ‘2010 to Present

B.Client : M/s.RAS GIRTAS POWER COMPANY –RAS LAFFAN “C” IWPP

PROJECT, (CCPP – 2730MW) STATE of QATAR

M/s.KAHRAMAA –Qatar General Electricity & Water Corporation

Company : M/s.HYUNDAI ENGINEERING&CONSTRUCTION CO.LTD

Designation : Electrical Engineer –Testing& Commissioning

Period : July ‘2009 to Sep’2010

C. Client : M/s.SAUDI ARAMCO-KGC PROJECT-SONE (Oil&Gas) at Khurais Gas Processing Unit Saudi Arabia

Company : M/s.HYUNDAI ENGINEERING&CONSTRUCTION CO.LTD

Designation : Electrical Engineer – Testing& Commissioning

Period : March’ 2008 to March’2009

DOMESTIC:

D. Client : M/s.HINDUSTAN PETROLEUM CORPRATION LTD,

AT MUMBAI -MAHARASTRA-INDIA

Designation : Assistant Elec. Engineer – Operation& Maintenance

Period : January’ 2005 to February’ 2008

E.Client : M/s.RELIANCE ENERGY LTD-THERMAL POWER STATION

2x250MW AT MUMBAI, DAHANU-MAHARASTRA-INDIA

Designation : Electrical Engineer-Testing&Pre Commissioning

Duration : December’2001 to Decemberr’2004

F. Client : M/S.NEYVELI LIGNITE CORPORATION LTD-NEYVELI THERMAL POWER STATION (TPS-II) 7X210MW AT NEYVELI-TAMILNADU-INDIA

Designation : Electrical Supervisor – Operation & Maintenance

Duration : September’1998 to October’2001

G. Client : M/s.CHENNAI PETROLEOUM CORPORATION LTD

AT CHENNAI-TAMILNADU-INDIA

Designation : Junior Engineer Operations&Maintenance

Duration : June’1996 to August’1998

Responsibilities of Testing &Commissioning and Maintenance:

Performed in Testing & Commissioning and Operation & Maintenance of Petrochemicals, Power Plants, Oil &Gas, 400/220/132kv GIS (ABB), 33/13.8,33/11,11/0.415kv Substations and MV/LV SWGR, and PCC, MCC & Distributions.

Testing and commissioning of Power Transformers up to 800 MVA ( 400 / 220kV, 220/132kV,132/66kV, 132/33kV, 66/11kV ,15MVA(13.8/4.16kv)and Aux.Transformer of 2000KVA,1500KVA(11/415kv),2500kva13.8/0.480kv OLTC, RTCC parallel operation Schemes, Protection Schemes- Differential Stability, REF Stability and various protection tripping, Interlocks and Inter tripping.

Testing&Pre-Commissioning of Protection relays numerical (ABB/SIEMENS)–RET670 Differential, REB500Busbar Protection, REC670 Over current & Earth fault, RED670Line Protection, SPAJ115C Stability & Earth fault, SPAU114C Sync.check,Trip circuit Supervision,MVAJs101,105,205,Trip &Lockout relays, interlocks, inter tripping.

Interface with Engineering Construction and Operations Team leads, Client & Contractors.

Preparation of Pre-commissioning checklist, Test reports, as built drawings, cable schedules and detailed commissioning schedules for the above mentioned systems to get the approvals from concerned CEIG.

Performed in individual equipments testing of CT/PT, LA, CVT, Power Contactors, Circuit Breakers of SF6 / Vacuum / OCB/ACB, Isolators, MCCBs.

Testing of Control and relay panels (CRP) of various substations, power plants (400/ 220/ 132/66/33/11kV) and their overall scheme Checking.

Replacement of protection relays in place of existing old relays and Reliability of the protection schemes and modification of schemes at sites in order to upgrade the Technology

Testing & Energization of the Dry Type Transformers for Lighting Switch Racks.

Testing of MV/LV Power Cables and Electrical &Instrument control cables.

Solo Run Testing of MV/LV Motors and Functional Tests including Gas Compressors Motors with Electrical Instrument Loop Testing with Local & Remote control Systems through DCS and SCADA systems.

Performed SCMS signal tests up to SCADA and End2End signal tests (NCC) with Clients.

Review of contractor Mark-ups drawings make as built as per Electrical Standards.

Pre-commissioning check lists, as built drawing update, Test reports preparation, reviewing and submission to project control.

Preparation of Punch list items for Non- compliance to Project Technical Specifications and Scope of WORK on Technical Completion of the project and Coordination with client & consultant

Preparation of ECC, NOSP for commissioning startup of Energizations and coordination with clients.

Awareness of the Company Health, Safety, Environmental & Quality policies and procedures to achieve fit-for-purpose in Construction and Commissioning.

Operation and Maintenance

Performing the functions of Troubleshooting and Predictive / Breakdown / Preventive maintenance for reducing machinery downtime to minimum.

Analyzing various processes / power systems and taking adequate measures to enhance operational efficiency.

Receiving work order, Preparations of PTW as per company’s HSE policies and safety procedure, to carryout maintenance or any repair works.

Operation& Maintenance of Power Transformers132/33kv,13.8/0.480kv,11/0415kv, MV/LV Switchgears and 4.16kv vacuum circuit breakers for Motor feeders.

Operation& Maintenance of Power and Auxiliary transformers of ratings up to 310MVA, 58, 39MVA, 20, 2.5MVA for 400/21kv, 11kv, 13.8kv voltage level.

Maintenance of MV/LV Switchgears and Protection systems.

Maintenance of Vacuum and Air circuit breakers.

Operations&Maintenance of HT/LT Motors, HVAC, UPS, Batteries and charging systems.

Operation& Maintenance works for 11/.415 KV Distribution Systems

Operation&Maintenance, of electrical equipment’s like 220/66 KV, 220/33 KV, 66/11 KV 33/11 KV level & different switchgear / apparatus - SF-6/ GIS / Oil Circuit Breaker / Minimum Oil Circuit Breakers, Isolators, Current / Potential Transformers., Shunt Capacitor Banks (20MVAR, 10MVAR, 5MVAR), Batteries & Battery Charger unit, Earthing of Grid / Equipments etc

Preparation of detailed work schedule, drawings, cable schedules to carryout the shut down work for maintenance, Refurbishment modifying, upgrading the existing electrical systems such as additional bays in existing substation, additional panels to existing switchgears.

Troubleshooting of Control wirings of all types of Starters, MV/LV SWGR, PCC MCC Schematic diagrams and Interlock circuits. Initiation of SCADA (Electrical Instrument Loop Testing), DCS, status & analog points checking.

Involved in major overhaul activities, carried out shutdown preparation, data collection and condition monitoring duties as assigned with senior Engineers.

Scheme Checking:

Over all double bus (Main & Reserve) and on load bus Transfer scheme checking of 220/132/66/33/11kV GIS.

Local, Remote & Mechanical Interlock scheme checking for 220/132/66/33/11kV GIS.

Binary Input & Output Signal up to BCU & SCADA end.

CT Primary & Secondary Injection Test.

VT Primary & Secondary Injection Test.

Bus-bar Stability Test.

Transformer Stability Test for 315MVA up to 800KVA.

Trip logic Scheme checking.

Trip Circuit Supervision Test.

On-Load Transfer Scheme Checking.

Achievements:

Testing & Commissioned the Substations in Power Plant(CCPP) of 400/220/132KV GIS, Local Electrical Buildings, Main Electrical Buildings, and BSDG, CCW, HRSG, Cooling Tower, Admin Building, Desalination and Water Treatment plants.

Testing and Commissioned in Oil&Gas Plant of Central Process Facilities of all Local and Main Substations (4x20MVA, 2.5X14MVA 13.8/0.480KV, 60Hz), and Solo Run Tests of field areas Motors up to 450 Nos (including of MV&LV) & MOVs, Crude Storage, Shipping and Transfer, KO Drum, NGL Shipping, Storage and Transfer, HP/LP and Common Flare areas, Gas Train1&2 areas, Gas compressors, Local Control systems with Electrical Instrument Loop Testing through DCS & SCADA.

HiPot Testing of MV SWGR and MV Cables, Pre Commissioned of Dry Type Aux. Transformers (up to 2000kva/11000/415) 48Nos for distributions and Lighting Switch Racks.

Complete project infrastructure, Modification of Existing SWGR 11KV, MCC and Distribution systems.

Coordination with clients, Handling of complete power infrastructure of the project, Field Test inspections, prepare site survey reports, Test reports review& submission of ECC,NOSP to Project control, safety audits review, follow with Clients, final acceptance of Mechanical Clearance certificates for Energization.

Electrical construction work is carried out in accordance with Permit to Work procedures, project drawings.

As a work permit receiver in Saudi Aramco (KGC), Gasco (IGD5) project receiving the permits of hot, cold and confined space entry.

Test Kit Handled

Well versed in handling testing kit Megger, Fluke Multimeter,Clamp meter,SVERKER, OMICRON CPC100,CMC356 & 256, CMC156, FREJA 300, CONTACT RESISTANCE measurement ELTEL – DMO 100D & GE Programma Kit, , Omicron CT Analyzer, OMICRON-CPC100. Primary, Secondary injection kit, High Voltage test kit.

Driving License Details:

Having Four Wheeler Driver License No: MH 01/2006/49296/LMV

Personal Skills:

Comprehensive problem solving abilities, excellent sound, verbal and written communication skills, ability to deal with people diplomatically, willingness to learn and team facilitator.

Date of Birth : 14th May1976

Language Known : Good command in English, Hindi and Tamil

Nationality : Indian

Marital Status : Married

Passport No : G-5025433

Place of Issue : Trichy

Valid : 19.08.2017

Permanent Address : P.Velmurugan,

3-2-23G, Thanthai Periyar Street,

P.C.Patty (P.O)-625531,

Theni (DT); TamilNadu-India

E-Mail Id : z86j6v@r.postjobfree.com

: z86j6v@r.postjobfree.com

Contact No (Resi) INDIA : +91-956*******



Contact this candidate