R.SARAVANAN

*/***, ******* *****,

Umamaheswara puram (Po)

ChettimandaPam,

Kumbakonam (Tk),-612013

Tanjore (DT), Tamilnadu, South India.

Mobile: +91-957*******, 999-***-****

E. Mail: yomgui@r.postjobfree.com

Dear Sir/Madam,

Total of 7+ years experience in Welding inspection, &NDT, in new built projects of Ship Building, Construction, petrochemicals, Oil& Gas

• Fabrication And Erection For Module , Pipe Rack , E House , Turret and Moon Pool Area Of Ship Building

• Construction of piping for petroleum oil gathering and distribution system between stations.

• Construction of station piping for the dilution, desalting, water separation and degassing of petroleum.

• Construction of piping for petroleum oil gathering wellhead & flow line at oil field.

I wish to apply for the post of QA/QC Engineer. I wish to offer my candidature for the same and supply here my details for the same.

As such I will be grateful if you would please understand my enthusiasm to work at your esteemed Organization, which nourishes the hard working qualities in me. I will strictly abide by all the rules and regulations pertaining to this job at your engineering department without my deviation. Please kindly reply the confirm compliance as soon as possible.

Curriculum Vitae regarding myself are enclosed herewith.

Thanking you.

RESUME

RAMASAMY SARAVANAN

Personal Info.

Father’s Name : Mr. Ramasamy

Date of Birth : 28.11.1987

Nationality : Indian

Marital Status : Single

Language known as : Tamil & English

Current Country : India

PASSPORT DETAILS

Passport No : F9735882

Date of Issue : 09.10.2006

Date of Expiry : 08.10.2016

DRIVING LICENCE

India License No : F/TN/049Z/002552/2007

Place Of issue : Kumbakonam, Tamilnadu

Valid Until : 14.06.2027

Academic Qualification

Diploma Mechanical Engineering Indira Gandhi National

open university, Delhi NOT COMPLETE

10th Standard Little Flower Higher Secondary School. April 2002

12th Standard The Banadurai Higher Secondary School. April 2005

Professional Qualification

• AWS - Welding Inspector

(Certificate No. 09112921 )-April 2009-India

• CSWIP 3.1 –Welding Inspector (Certificate No. 49661)-July 2010 – India

Technical Qualification

ASNT LEVEL – II ( PT, MT, RT & UT) Bharath Inspection Services - Tricky

IT Expose

Operating System : Dos, Windows’98 & XP

Packages : Well version in MS Office 2000

Language : C, C++, HTML

GUI : Visual Basic 5.0

Back End : RDBMS with Access

Net work : LAN, Internet

Drafting : Auto CAD 2006

Employment History

Certified ASNT Level II in (PT, MT, UT & RT), AWS (Certified of welding inspector) And CSWIP 3.1 gained strong background in Marine field related inspections & Construction related inspections. More than 7 Years working experience in the field of Non Destructive testing in the disciplines of Ultra flaw deduction, Magnetic Particle Testing & Liquid Penetrant Testing from the well reputed steel component based company in India, Singapore, Kuwait, Saudi and Oman. Individually will perform the entire type of the NDT related activities, Welding inspections and familiar to most of the international standards as ASME, ASTM, AWS, ABS, API, DNV, EN, etc.,

Career Profile

WORKING EXPERIENCE

Different Clients, The following are the details of my working experience. Around

7 Years experience in the field of Piping and Structural inspection, Welding, NDT

And QA&QC Inspections.

S.No

Name of the Organization

Designation

Period

1

Bharat Heavy Electricals Ltd ( BHEL) Trichy,India

QC INSPECTOR

May 04 to Feb 05

2

M/s Tech Sharp Eng. Pvt .Ltd .IGCAR,

KALPAKKAM

QA&QC INSPECTOR

Feb 05 to Sep 06

(2005-2006)

3

M/s Sonic Inspection Services , Chennai

QA&QC/NDT inspector

Sep 06 to Jul 07.

(2006-2007)

4

Sievert India Pvt. Ltd. Mumbai

INSPECTION ENGINNER

( SHUT DOWN)

Jul 07 to Sep 07

(2007)

5

Tomtec ndt marine services Pte Ltd., Singapore.

WELDING INSPECTOR

Sep 07 to Sep 09

( 2007-2009)

6

Kuwait National Petroleum Ahmadhi Refinery., Kuwait.( ISCO)

QA&QC/inspection

( SHUT DOWN)

Feb 10 to July 10

( 2010)

7

Kuwait National petroleum Ahmadhi Refinery Kuwait. ( ISCO)

QA&QC/inspector

( SHUT DOWN)

Act 25 to Apr 29

( 2010-2011)

8

Al-Barak Industrial Services

Saudi iron & steel company (HADEED)

(Kingdom of Saudi Arabia)

Welding inspector

(SHUT DOWN)

Dec 4th to Dec 31st (2011)

9

Hi-tech Inspection Services LLC ( Omen )

( OXY PROJECTS )

Welding inspector

(SHUT DOWN)

Jan27th to Mar06th (2012)

Job Profile:

• Fit up & Joint Preparation Inspection

• Pre heat, Inter Pass cleaning & Inter pass heating temperature Inspection and Welding Parameters like Amp / Volt during welding process.

• Check final Dimension as per drawing & Visual Inspection

• Assisting in Welding Procedure Specification and Welder Qualification test.

• NDT Inspection on structures using techniques like UT, MT and PT.

• Preparation of QA Documents like Material verification reports, Fit-up inspection reports, Visual inspection reports, Dimension inspection reports and NDT reports.

• Preparing welding Procedure Specification (WPS) with relevant qualified PQR for the particular projects

• Performing Welder Qualification Tests for various welding procedure

• Carrying out the welding inspection before, during and after welding operation as per approved test plan, relevant engineering drawing, international standard and project specification

• Performing activities as per Inspection Test Plan and Method Statement for various activities involved in the construction of Petrochemical Plant as project specification & relevant International Standards and getting approvals from the client.

• Coordinating with client inspection department at various stages of fabrication activities and getting approval.

• Conversant with International Codes like ASME section II, V, VIII, IX, ASME B31.3,AWS D1.1, API 1104,API 650 , ISO 5817, API 5L , API RP 2X ,API 6A etc.

• Coordinating with Material Controller for Incoming Inspection of varies steel materials, consumables, tools and equipments etc. with relevant documents like material test certificates. If required performing mechanical test and chemical analysis in order to confirm as per project specification and relevant International Standards.

• Review the approved drawings & scope of work.

• Review of WPS, PQR, and welder qualification.

• Verification of material test reports as per client requirements.

• Witnessing Welder Performance Qualification Testing (WPQT).

• Piping fabrication and modification according to isomeric drawing and specification.

• Prepare the weld map including NDE inspection

• Random monitoring of fit up and dimensional checks for piping works as per approved isometric drawings.

• Monitoring welding consumable control, welders qualification and welding activities at fabrication shop and field as per standards which includes ASME SEC II, Part–A, Part-C. ASME Sec – V, ASME Sec VIII, ASME Sec IX, ASME B31.3 .ASME B31.1

• Check the fit up, joint identification and dimensional inspection.

• Monitoring the welding Activities as per WPS.

• Visual inspection of weld joints for different materials by different process (TIG, SMAW)

• Witnessing non-destructive testing for welds which involves M.T, P.T.RT &U.T.

• Review and interpretation of radiographic films.

• Monitoring positive material identification (PMI) for stainless steels, alloy steels and copper nickel.

• Preparation of daily fit up reports and welds visual inspection reports.

• Interpret/review NDT reports and maintain all related file and records.

• Monitoring the Post weld heat treatment of weld joints.

• Punch listing of piping system after completion of fabrication before blowing/flushing and commissioning of the system.

• Witnessing the Hydro test of pressure vessel and pipelines.

• Coordination with the client/consultants to maintain the quality to move the project smoothly.

• Preparation of weekly project welds rejection reports.

• Preparation of weekly welder rejection rate report for joint basis and linear basis.

• Welding, NDT inspection and preparation of Reports.

• Handled NDT techniques in UT, RT, MT& PT as per ASME section V.

• Magnetic Particle testing of welded joints using Prod and Magnetic Yoke with dry powder and wet methods.

• Dye-Penetrant testing of welded joints, pipes & fittings by Solvent removable method.

• Ultrasonic testing of plate/pipe weldments including butt welds and branch welds. Also carried out thickness survey on plant piping and pressure vessels.

• Carried out Lamination Check of Raw Materials.

• Radiography testing of welded joints in plate/pipe and castings using Iridium-192 ray sources.

• Good hands on Experience in testing WELD joints of PLATE/TUBE/PIPE and CASTINGS using NDT methods.

Project Handled

• Projects like Conoco Philips FPSO Project, Petropras 57 FPSO, Sea Drill Semi Submersible vessel Maersk Oil Halfdan Jacket and Topside Facilities and also have Refinery working experience in

(SINGAPORE & Kuwait)

• Ship Conversion project, Petroleum Refinery, Marine piping systems of

(Drilling Rigs & FPSO) offshore platforms and Vendor inspections. Having a wide knowledge on the International codes standards like ASME, AWS D1.1, API 1104,

• ISO and also good knowledge in P&ID and Isometric drawings.

• Halfdan Base II Development Maersk Offshore Platform Jacket and Top side Facilities SOME

(Sembawang Ship yard) SINGAPORE

• Kuwait national petroleum company( Refinery )KUWAIT ,OXY PROJECTS (OMAN)

CODES AND STANDARD

• AWS D1.1

• ASME Section V

• ASME B31.1 & B31.3

• BSEN 1714:1712

• DNV & ABS

Products: Boiler Components

• Fabrication Components of Non Pressure Parts up to 500 MW Design & Pressure Parts. Structural of Main Columns, Ceiling Girder, Bracing, and Structural’s, Etc. Fluid Path of Ducts, Bellows, Wind box, Super Heater Coils. Wind Mill Towers

Declaration

I hereby declare that all the above mentioned details are true to the best of my knowledge and belief.

Yours truly

Place: R.SARAVANAN

Date

Contact this candidate