CURRICULUM VITAE

STUDIES

B.Sc. In Power Mechanical Engineering Faculty of Engineering, Ain shams University. May (2007)

Diploma of Natural gas Processing(Cairo University)

Contain: piping and pipeline transportation , Construction and storage tanks and pressure vessels ,drilling, The Drilling Rig, Junk Drill pipe Design, Down hole Drilling Equipment, Drilling Fluid, Casing and Cementing, Formation Evaluation, Normal Drilling Operations, Special Drilling Operations, Drilling Problems, Completions, New developments,Natural gas reservoirs, Gas Engineering Fundamentals, and Gas Production

Petrochemical, Natural gas Utilization, Processing of Fractionation, Seperation and Purification, Instrumentation and Control, Measurements, Transportation & Storage

Petrochemical (industries of hydrogen , fertilizer (Urea),ammonia ,Ethylene oxide and vinyl choride,butadiene ,Polymers and its structure and properties of polymer .Industries of polymer like High density poly ethylene and Nylone 66, Gas to Liquid Technology Like Fisher –Tropsh method. E.g. Sasol, Shell, Syncrude, Exon and Syntroleum

• Experiences with preparing and reviewing various engineering documents include:

Basis of design

Seawater Intake process description

Hydraulic calculation for determining basin size (using FLUENT software)

âSurge analysis and water hammer calculation (using AFT impulse software)

Pipeline hydraulic calculation (using PIPESYS software)

Seawater Intakes equipment datasheet (for Lifting Pumps, Centrifugal pumps, Fire fighting Pumps, Electro-chlorination packages, Screening plants(bar, band or drum), Auto-backwash filters, Plate Heat Exchangers, Air-compressors, pressure vessels, Stop logs and sluice gates, Material handling equipments and combine check valves, etc)

PFD and P&ID (Participation in developing)

Piping UG and AG Documents include:

-Piping Design Criteria

-Technical specification (PMS, Design Job spec, valve spec, Hydro-test, etc)

-Procedures (Erection of GRP pipes, model review, test block diagram, etc)

-Lists (Line, valve and support, critical lines, etc)

-Datasheets (Valves, expansion joints, hose and couplings, pipes)

-Calculation notes (Wall thickness, stress (using CAESAR II v. 5.0), thrust block, etc)

-Standard and special drawings (support standard/special drawings, etc)

-Piping design using 3D modeling software.(PDMS 11.6)

-Piping plans and layouts, sections and isometric drawings

-Material Requisitions

-Material Take off and bulk material MTO (preliminary, intermediate, final)

-Pipe-rack single diagram

-Nozzle orientation drawings

-tie-in table and drawings

-Fabrication drawings (miter bends, special caps, etc)

-Transportation pipeline rout (for C.S / GRP / HDPE pipelines)

-Longitudinal drawings for pipelines

-Pipeline right of way and Cross sectional drawings

Working on procurement engineering of seawater intake equipments preparing purchase requisition, technical bid evaluation (TBE)

Technical quires and technical meeting with domestic and international vendors for optimizing of purchase and improving equipment and plant performance.

Participating in preparing Basic design and tender documents.

Concept and Feasibility Study of Cooling system plants (Investigating the different possible cooling methods including cooling tower, once through cooling system, close loop system with Heat exchanger and combination systems)

Specialist in designing, stress calculation, support design and installation of FRP piping system and pipelines

GENERAL

Work scenario: the profile will be, time to time, assigned to project teams developing proposals or executing projects related to the realization of industrial plants.

Objective: To Provide Technical expertise of piping Engineer Support to Project Management, Supply Division and Project Control Through all Phases of major Projects.

- Reporting to: Head of Piping Engineering Department

Thrust calculation Pipeline

piping calculation

heat Exchanger Piping calculation

Pipe rack Calculation

Tower piping calculation

Tank piping calculation

- Work location: Cairo – Egypt with possible frequent business trips or long term Assignments in Egypt and abroad (office & site support activities).

Total Years of Experience: 5 + years

WORK EXPERIENCE

Gulf of Suez Petroleum Company (GUPCO) 2008-Present

International Partner : BP ( British Petroleum )

Project discipline Engineering

All the plant design & piping engineering and design activities (see deliverable list for details) required for the successful completion of the assigned project/proposal.

- Perform Quality checks on plant design & piping engineering documents issued by the Junior Plant Design & Piping Engineers

- Perform the interdisciplinary checks on the engineering documents as foreseen by the engineering procedures.

- Perform checks and reviews of documents provided by external agencies and Technology providers (licensors)

- Coordinate the plant design & piping activities of the internal team and of the subcontractors, technology providers (licensors) or other external stakeholders.

- Ensure that the relevant information flow is optimal in timing and quality.

- Identify optimal techno-economical solutions for the project smooth development.

- Ensure compliance with the applicable standards, specifications, procedures and good engineering practices with special regard to HSE and Quality.

- Maintain and foster the links with the other project functions promoting efficient and seamless interaction for fast track project execution.

- The profile shall be responsible for the above through directly executing the relevant necessary activities or coordinating the activities of Junior Plant Design & Piping Engineers assigned to him/her on a project basis. This will depend on the specific project workload scenario.

Soft skills: Strong team work attitude and ability to motivate the team members, significant communication skills, problem solving attitude, fast and multi-task execution capabilities, strong analytical mind set and imaginative problem solving ability.

Deliverable list: Activities falling under the profile’s responsibilities shall be (but not limited to): Preparation of:

- Layout & Piping Design Criteria

- General Layout (Site Plan)

- Equipment Layout Plan (Unit Plot Plan)

- Piping Assembly Drawings Key Plan

- Piping routing studies

- Underground system routing and pavings

- Piping & Instrumentation Diagrams (P&ID’s)

- Line List

- Piping Specifications (e.g. supply, material, dimensional, fabrication, erection / installation, welding incl. equipment welding, testing, PMI, insulation

- List of piping special components

- Technical Bid Evaluation

- 3D- Model

- Piping isometric design and issue procedure

- Piping isometric list

- Piping isometric drawing

- Piping MTO and requisitioning procedure

- Pipe (ordinary, special and spring) support specification & summary

- Stress analysis specification and calculation (incl. notes)

- Data sheets for expansion joints, shock absorber, sliding plates and tracing manifolds

- Work Requisitions (WR) relevant to Mechanical, Painting and Insulation activities

Development of technical deliverables including pipeline project plan, scope, conceptual engineering and pipeline design methodologies, cost estimates, design deliverables estimates. Multi-disciplinary evaluation and justification of route alternatives, Route Survey SOW, Pipeline Wall Thickness Calculations, Hydrostats Calculations, Road Crossing Calculations, general specification of pipeline, PipelineMaterials for sour / non-sour services, Pipeline Design Basis, Input to Design Drawings, Input to FEED report, and Inter-discipline coordination

The NCS-2 pipeline system consists of the following items:

- Offshore pipeline is approximate 325 km to transport 2 phase gas, starts from The Hai Thach Platform passes the Central Processing Platform of Thien Ung field, Bach Ho and then runs to a Landfall Station at Long Hai.

- Onshore pipeline is approximate 9 km, from Long Hai Landfall Station (LFS) to Gas Processing Plant (GPP2) at Dinh Co.

- Gas Processing Plant (GPP2) at Dinh Co.

- Onshore dry gas pipeline is approximate 30 km, from Dinh Co GPP2 to Gas Phu My Distribution Central (GDC). The onshore pipeline includes:

Line block valve station (LBV) at Phuoc Hoa.

Phu My GDC expansion: Only pig receiver, metering skid and tie-ins.

- Two liquid product pipelines (LPG & Condensate) is approximate 25 km from outlet ofDinh Co GPP2 to transport to Thi Vai Terminal and 03 LBVs.

Supervision, and monitoring the field piping engineer activities for different piping systems (Oil, Natural Gas, Glycol, Air Utility, fire water, Flair,…etc), reading and reviewing ( GA’’2D’’, Isometric, P&ID ) drawings, punch lists flushing, pre-commissioning, commissioning, hydro test, leak tests…etc

Developing the process design for small projects or proposal consisting of a normal piping system component. And make the required bill of materials according to the international cods & standards such as:

ASME/ANSI. (B31.3, B31.8, B31.4……..)

Provide the mechanical engineering expertise, this include preparation of engineering packages/drawings/specifications for in-house engineering projects. And Revising engineering designs prepared by international consultants.

Making the fluid handling studies for the different networks network types (gas, Oil, water). And pressure drop calculations

Study the troubles of different operating systems and advise the suitable solution according to the international standards such as:

API (14C, 14E,)

BP specification

Provides a reliable process engineering assessment using the most widely used process simulator (HYSYS)

Evaluating pump performance and updating its performance curves according to its current condition. And participating in the design of component parts and individual units; reviewing and monitoring designs for conformance with control estimates and project specifications (Sizing and rating of Control Valve, PSV, Orifice Plate, Piping & Pipelines, Pumps, and Separators).

Acts as a reference source to other Departments Includes liaising with Production, General Maintenance and to HSE Division, furnishing them with technical information as requested, suggesting improvements in their field of work and assisting in developing improvements initiated by them

Reviews, comments or design Minor changes initiated by Production Dept. through

Management of Change Process

Participation in Integrity Engineering Discipline recruitment and development programs participating in the required Process Hazards Analysis (PHA) sessions.

J-10 Offshore Platform company (GUPCO) 2008-2011

• Compilation of piping scope activities including MTO’s, drawings.

• Prioritized scope activities to most efficiently meet project schedule requirements.

• Ensuring implementation and adherence to project specifications and procedures.

• Responsibility for monitored piping designer’s quality and taking necessary actions to maintain satisfactory standards.

• Continuously updated project drawings and documents to final As-built status.

Process Onshore Area company (GUPCO)

• GRE (Gray reinforced Epoxy) Piping for Free water Knock out Drums making MTO and Isometric drawing and Specification.

• Heat Exchanger Piping modification for long loop carbon steel ping API 5L Grad.B Making Stress analysis with the team and identify the anchor support and Refuse the modification.

• Control valve Data sheets Review and Re-Check the new Conditions for support the plant Requirements.

• Complete design of piping general arrangement layouts, Piping isometrics, Supports Details, Materials take off, Equipments location plans, plot plans, orientation drawings, Tie-in Index & tie in packages.

• Review the piping activities and completion in accordance with schedule requirements.

• Compilation of piping scope activities including MTO’s, drawings, and project activity durations.

Badri Offshore Platform company (GUPCO)

• Review the piping activities and completion in accordance with schedule requirements.

• Compilation of piping scope activity work packs including MTO’s, drawings, method statements, sequences, manpower & equipment requirements and project activity durations.

• Identify the piping materials deficiencies affecting in successful activity completion.

• Liaised closely with materials procurement group to specify and instigate local and international piping materials purchases.

• Ensuring implementation and adherence to project specifications and procedures.

• Responsibility of monitoring the fabrication shop to insure the quality of piping fabrications, welding, implementation of the required NDE, and Hydrostatic testing in accordance with the codes and standards.

• Responsibility for monitored workmanship quality and taking necessary actions to maintain satisfactory standards. This also included the preparation of punch lists and associated rectification programs.

• Continuously updated project drawings and documents to final As-built status.

Other Offshore Platform company (GUPCO)

• Randan-6 Platform Separator Safety Relive Valve Re-setting and Review vendor documentations for all piping material Making Layout Sketch s and Plot Plan for Platform.

• October Platform Glycol Skimmer PSV Design instead of Rusher disk. And contact with vendor and make Work Requisitions for the valve.

• Provide piping input to Process Piping and instrumentation diagrams (P&ID), Line designation table (LDT), Instrument specification sheets (ISS),

• Preparing material take-off requirements and isometric drawings for construction using 3D CADD (Computer Aided Design and Drafting) modeling software.

• Preparing& checking of equipments orientation drawings for all types of Static and Rotary equipments, Considering equipments spacing, accessibility, operation and maintenance requirements.

• Review all vendor documentations to assure the compliance with the design and technical requirements.

• Preparing and reviewing piping specifications in accordance with the company standards and general codes (full awareness of Bechtel standards, ARAMCO standards, ENPPI standards).

• Preparation of Piping Specification & valve specification

Utilities Offshore and Onshore Platforms Company (GUPCO)

• Development of piping layouts

• Isometric drawing & bill of materials

• As - built drawings of existing piping.

• Piping material take off for estimation and purchasing.

• Preparation of Specifications for Pipes and Fittings, Valves and Piping Specials

• Interface with other discipline to resolve design and construction problems

• Preparation of support drawings with support standards.

• Compressed Air Piping for Ingersoland.

• To prepare reports and trends of mechanical maintenance (cost/repetition/parts change etc.) and shut down job/check lists.

.

Sep 2011- Present PIPING ENGINEER – Worley Parsons, Cairo Part time

Project – Basic & Detailed Design And Engineering Of A New 150,000 Bbl Oil Storage Tank Proposal- Petrogulf Company) – Egypt.

The responsibility is to develop the followings:

• The required piping man-hours to achieve the basic design and detailed design of the Piping network required to connect the new 150,000 Bbl Oil storage tank to the existing storage facilities piping network

• Equipment Layout Plan (Unit Plot Plan)

• Piping Assembly Drawings Key Plan

• Piping routing studies and Stress analysis by Caesar ii 5.1

Project – Khalda Oil And Gas Company Proposal for Basic & Detailed Design for Propane tank Projects - Egypt

The responsibility is to develop the followings:

• The required piping man-hours to achieve the basic design and detailed design of the Piping

• Isometric drawing & bill of materials

• As - built drawings of existing piping.

• Piping material take off for estimation and purchasing

2007 – 2008 PICO Industries (EGYPT):

Mechanical Design engineer

• I was responsible for installation of various instruments devices like (transmitters- RTD -thermocouple - pressure switch- level switch- H2 analyzer- CO2 analyzer-UBS-…)

• Installing ultrasonic level indicator for the fuel oil tanks.

• I was a member in the start up and commissioning team and made the necessary punch list.

• I was a member in the team which reviews all the logic of control system.

• I was responsible for installation of all the control panels and arrange the wiring.

COMPUTER EXPERIENCE

MS Office (Word, Excel, Power Point), MATLAP, Microsoft access,

Coraldraw-12 MS-Projects

Cadworks( 3D Design Modeling, CAESAR ii 5.1 Stress analysis

PDMS, Solid Works AutoCAD (2D&3D)

PIPEPHASE , HYSYS7.2, PROII Pipesim, Shlumberger

TRAINING COURSES

• Pipe line design

• Welding inspection and Non Destructive test

• Specification and codes

• API 560

• HYSYS for process modeling.

• Gas Dehydration and Sweetening

• Pump technology & troubleshooting

• Fundamentals of mechanical Engineer

• ASME B31.8 For Gas Transmission Pipeline

• Oil & Gas Process / Facilities Fundamentals.

• Cause and Effect and Failure analysis

• MS- Project

• Pipe line design

• Welding inspection and Non Destructive test

• Specification and codes

• API 560 Training conducted by GUPCO

• Safety Training Observation Program "STOP"

• Radiation training course

• Environmental management system training course

• Safety courses in Permit to work

• Safety courses in Isolation tasks.

• Safety courses in Risk Assessment.

• Occupational health courses.

• H2S Training Course

• First Aid Training

• Manual Handling Training by Sparrow Com.

• Fire Fighting Training Course

• Lifting & Slinging Training Course

• Helicopter Safety Training Course

• Working cording to Gulden Rules course

PERSONNEL DETAILS

Name : AMIR MOJAMED ABD EL-SAMIE AHMED

Position : Piping Engineer

Nationality : Egyptian

Qualifications : 2009 – 2011 Diploma of Natural gas processing from Cairo University-

Mining and Petroleum Engineer division

: 2002 – 2007 Bachelor degree in Mechanical Engineering at Ain Shams

University

Languages : English - Dutch – (Arabic– German)

Date of Birth : September 22, 1985

Status : Single

Home address : Ain Shams west, 11311

19 Mohamed Hassa-Balla St. Cairo –, Egypt,

Telephone : 00 2 (0)2- 22532307 (private) / 00 2 (0100 – 12 733 07(mobile)

: 00 2 (0100- 1850696 (business)

Contact this candidate