ResumeLogin
Search for: Jobs   Resumes
Keywords or title City, state or zip code

Project Welding Inspector Construction Supervisor

Post jobs
Country: United States
Posted date: 9/24/2012   all resumes
Email: kir19e@r.postjobfree.com
Contact Info: *********@*****.***
Show Full Resume Send Message Free
Email me new resumes like this


Email
Resume Text:


ASWADI NAZAR

Jl. Suprapto No. **, Tanjung Karang, Bandar Lampung, Indonesia
Telp : HP : 081363437602
Email : kir19e@r.postjobfree.com and kir19e@r.postjobfree.com

To : Human Resources Department
Subject : Application Letter

Dear Sir,
I wish to apply for the vacancy for the post of Welding Inspector therefore I am to submit my application for that position in your company or project.

Allow me introduce my self. I am 34 years old, married and graduated from Padang Institute of Technologi majoring of Mechanical Engineering and I have qualification in Welding Inspector (WI) course at Institute for the Research and Development of Material and Technical Product Industries (B4T) Bandung 2004, UT ASNT Level II at DB School Batam and Welding Inspector CSWIP 3.1

I have an excellent health, good communication skill ( have experience in same position), read for the challenge, highly motivated to work, adapts easily, able to work under pressure and always to looking for ways to improve my self and others. I can operate Microsoft Windows, Ms Office Application any other application and able to communication in English.

Thank you for concerning my application and I am looking forward to your reply.

I would be very appreciated if you would grant me an interview at any time you think convenient.

Sincerely yours,
Aswadi Nazar

CURRICULUM VITAE

N a m e : Aswadi Nazar, ST
Place and Date of Birth : Bukittinggi, November 07th 1976
Address : Jl. Budi Luhur, Gg Masjid Arrhido No. 40 E
Medan, Indonesia
Mobile Phone: 081363437602
Sex / Martial Status : Male / Married
Religion : Islam
Nationality : Indonesia
Weight / High : 84 kg / 170 cm

FORMAL EDUCATION :
Graduated from Degree ( S-1) Institute Technology Padang Majoring Mechanical Engineering (2004)

TRAINING & QUALIFICATION :
.
1. Qualified & Certified Welding Inspector (WI) course at Institute for the Research and Development of Material and Technical Product Industries (B4T) Bandung 2004
2. Qualified & Certified NDT Ultrasonic Testing (ASNT Level II ) Held by DB School Batam (2012)
3. Qualified & Certified Welding Inspector CSWIP 3.1, Certificate No. 54492
4. Computer Literated Ms. Office and Autocad

ADDITIONAL INFORMATION :
1. Familiar with standar and code : ASME, AWS, API 1104 and other Code/Standar
2. Hands and Knowledge with Welding Prosses, Welding Ispection,DT and NDT
3. Analytical, Honest, Accurate and Detail oriented

SYNOPSIS OF PROFESSIONAL EXPERIENCE
More than Six (8) years of experience in the engineering, procurement and construction project: fabrication, quality control (verification, certification, inspection, examination & testing) for construction of oil & gas processing Power Plants, Gas Processing Plants,Piping, Pipeline for Oil and Gas Industry, Pulp and Paper and other related quality control.
Work under pressure flexible on duties to perform accept responsibility work long hours committed to going extra mile to completed job correctly on time work wel as team player/ have worked on own/ prepared to work in busy & isolated area. Interpersonal skills, particular the ability to listen/ understand co-worker, customer/ client problems & point of view. I am committed to being professional in my work displaying integrity at all time.

WORKING EXPERIENCE :
.1. November 2011 up to September 2012
SLC Saipem Leighton Consortium
Position : Welding Inspector
Project : Gorgon Project, Borrow Island LNG Plant- Australia

Job / Responsibility :
- Witnessing of welder and welding operator qualification test
- Witnessing of welding procedure qualification test
- Monitoring welding activities before,during and after fabrication are performed as required by WPS
- Monitoring Pre heating, Inter pass temperature, Post weld heat treatment and Control & Storage of Welding Consumables
- Reviewed Methode statement,Procedure that Submitted from Contractor
- Check Material Identification as per WPS and Welder Qualification tes Limitted
- Reviewed NDE report for joints which have been visually accepted as required by the NDE plan and monitoring the status
- Performe the safety requirement

2. July 2010 up to November 2011
PT. Makmur Sejahtera Wisesa
Position : Welding Inspector
Project : Tanjung Tabalong 2 x 30 MW Coald Fire Power Plant South Kalimantan

Project Description : This Power Plant use Circulating Fluidised Bed Boiler type,Water Treatment Plant from “SP 13 Lake” through out 14” HDPE Pipe tie in with pipe A 53 Gr. B to Raw Water Tank and further proses at Demin plant (Sand Filter,Filter Water Tank,Strong Acid Cation,Degasser,Weak Base Anion,Mix Bed,Demin Tank etc) I am involved contruction and Testing in Demin Water Tank,Filter Water Tank and LDO Tank.
Also I am Involved inspection and testing of TG Building Structure,Boiler Structure,Presure Part,ESP and Chimney(Stack)

Job / Responsibility :
- Witnessing of welder and welding operator qualification test
- Witnessing of welding procedure qualification test
- Monitoring welding activities before,during and after fabrication are performed as required by WPS
- Monitoring Pre heating, Inter pass temperature, Post weld heat treatment and Control & Storage of Welding Consumables
- Reviewed Methode statement,Procedure that Submitted from Contractor
- Check Material Identification as per WPS and Welder Qualification tes Limitted
- Witnessing of Pneumatik Test,vacuum Test and Leak Test for DM,FWT.LDO Tank
- Monitoring Fit Up for Boiler Combastor,Back Pass,Super Heater,Economizer, ESP before Welding
- Check Material Identification against Elctrode e.g Water Wall ( SA 210 Gr.C) use E7018-1 for SMAW and ER70S-A1 for GTAW, Main Steam Line (SA 335 P22) use E9018-B3 for SMAW and ER90S-B3 for GTAW, Hanger Tube (SA 213 T11) use E8018-B2 for SMAW and ER80S-B2 for GTAW,Vortek (253 MA) use Electrode 253 MA(Avesta) etc.
- Witness Pre heat,PWHT for material thicker material e.g more than 19mm
- Before welding ensured all applicable code requirement had been adhere to, Also during and after welding process. Check portable electrode oven (Quiver)
- Selected Joint for 50 % Radiograph for Pressure Part and NDE for Steel Sructure (PT/MT)
- Reviewed NDE report for joints which have been visually accepted as required by the NDE plan and monitoring the status
- Monitoring Verticality,alignment from structure erection for Boiler Structure,Coal Bunker Steel Structure
- Performe the safety requirement

3. November 2009 up to Juli 2010
PT. Sele Raya Merangin Dua
Position : QA/QC Welding Inspector
Project : Tampi Field Facilities

Project Description : This Project is construction of Storage Tank for Crude Oil and 5 Kilometer 4” transportation Pipe line (API 5L Gr.B), I am involved for construction and testing those Tank and Pipe e.g Radiograph Test,Pnemautik Test,Vacuum Test,PT/MT Test etc

Job / Responsibility :
- Witnessing of welder and welding operator qualification test
- Witnessing of welding procedure qualification test
- Monitoring welding activities before and during fabrication are performed as required by WPS
- Before welding ensured all applicable code requirement had been adhere to,Also during and after welding process. Check portable electrode oven (Quiver
- To inspect weldments and request for defect rectification by using yellow marker and re-inspect if required. Prepare weld visual inspection report.
- Prepare NDE request for joints which have been visually accepted as required by the NDE plan and monitoring the status
- Submit the overlay of repair weld to welding supervisor

4. Oktober 2008 up to Oktober 2009
PT. TRIPATRA ENGINEERING AND CONSTRUCTOR
Position : Welding/Piping Inspector
Project : JAMBI MERANG DEVELOPMENT GAS PRODUCTION FACILITIES
Client : JOB PERTAMINA-HESS

Project Description : This Project is Development Gas Production Facilities location at Bayung lincir, as Welding/Piping Inspector, I am involved construction and Testing of piping,Spherical Tank,Pipe Rack Steel Structure etc.

Job / Responsibility :
- Witnessing of welder and welding operator qualification test
- Witnessing of welding procedure qualification test
- Monitoring welding activities before and during fabrication are performed as required by WPS
- Monitoring Verticality,alignment from structure erection for Boiler Structure
- Witnessing Bolt Tightening for Pipe Rack
- Before welding ensured all applicable code requirement had been adhere to. Also during and after welding process. Check portable electrode oven (Quiver
- To inspect weldments and request for defect rectification by using yellow marker and re-inspect if required. Prepare weld visual inspection report.
- Prepare NDE request for joints which have been visually accepted as required by the NDE plan and monitoring the status
- Submit the overlay of repair weld to welding supervisor

5. October 2007 up to October 2008
PT. PEC-Tech Indonesia
Position : QA/QC Inspector
Project : Recovery Boiler # 5,Shut Down Evaporator #1,2 and 3,Maitenance
Project.Bio Sludge
Client : PT. Riau Andalan Pulp and Paper

Project Description : I am involved construction and testing of pressure part and Shut Down for Evaporator,Power Boiler,Recovery Boiler e.g check thickness of water wall with UT Testing,evaporator,condensate tank also repair or replace tube,Inspection in Steam Drum and lining for Ducting,ESP,Inspection at Bottom Nozzle if any damage/Crack/Fracture also inspection at Wood Yard for repair Belt Conveyor,Wood Knife etc

Job / Responsibilities :
- Witnessing of welder and welding operator qualification test
- Witnessing of welding procedure qualification test
- Monitoring welding activities before and during fabrication are performed as required by WPS
- Before welding ensured all applicable code requirement had been adhere to. Also during and after welding process. Check portable electrode oven (Quiver
- To inspect weldments and request for defect rectification by using yellow marker and re-inspect if required. Prepare weld visual inspection report.
- Prepare NDE request for joints which have been visually accepted as required by the NDE plan and monitoring the status
- Submit the overlay of repair weld to welding supervisor

6. Agustus 2007 up to Oktober 2007
PT. Punc Loyd Indonesia
Position : QA/QC Inspector
Project : Gas Pipe Line South Sumatra and West Java Phase 1
Client : Perusahaan Gas Negara (PGN)

Project Description : I am involved on construction and testing All kind size of Pipe line

Job / Responsibilities :
- Monitoring welding activities before and during fabrication are performed as required by WPS
- Before welding ensured all applicable code requirement had been adhere to. Also during and after welding process. Check portable electrode oven (Quiver
- To inspect weldments and request for defect rectification by using yellow marker and re-inspect if required. Prepare weld visual inspection report.
- Prepare NDE request for joints which have been visually accepted as required by the NDE plan and monitoring the status
- Submit the overlay of repair weld to welding supervisor
- Witness Holyday Test before lowering Pipe Line
- Prepared All document report such as Daily welding joint report, Tie In report, Material Traceability Report and welding traceability report

7. July 2007 up to Agustus 2007
PT. Surveyor Indonesia
Position : NDT/UT Inspector
Project : Certification Claster #1,2,3 and 4
Client : PT Exxon Mobill
Job / Resposibility :

- Monitoring and Witness Thickness measurement activities at Claster #1,2,3 and before Certification
- Prepared Thickness Measurement Result Report

8. April 2007 up to June 2007
PT. Hansa Engineering Indonesia
Position : Welding Inspector
Client : PT. Vetco Gray Indonesia
Project Description : Joint Intermediate Pin and Box Connector to Tubular Pipe (18”-30”),Proses use SAW welding Proses and 100% Radiograph Testing

Job / Resposibility :
- Witnessing of welder and welding operator qualification test
- Witnessing of welding procedure qualification test
- Monitoring welding activities before and during fabrication are performed as required by WPS
- Before welding ensured all applicable code requirement had been adhere to. Also during and after welding process. Check portable electrode oven (Quiver
- To inspect weldments and request for defect rectification by using yellow marker and re-inspect if required. Prepare weld visual inspection report.
- Prepare NDE request for joints which have been visually accepted as required by the NDE plan and monitoring the status
- Submit the overlay of repair weld to welding supervisor
- Meeting with client and handle client complaint and direct execution
- Prepared All document report such as Daily welding joint report, Material Traceability Report and welding traceability report

9. July 2006 up to January 2007
PT. GUNANUSA UTAMA FABRICATOR
Position : Welding Inspector for Duplex
Project : BP Tangguh Gas Production Facilities Project
Client : PT. SAIPEM INDONESIA

Project Description : Fabrication and Testing for pipe Duplex stainless steel ( A 815,UNS S3183)/P No. 10H Gr 1 use electrode AWS No W2594NL for GTAW and E2209-15 for SMAW, Check the oxygen content prior to start welding shall be checked by using oxygen analyzer equipment (500 ppm maximum).Interpass Temperature and Heat Input must be maintain.

Job / Responsibilities :
- Witnessing of welder and welding operator qualification test
- Witnessing of welding procedure qualification test
- Monitoring welding activities before and during fabrication are performed as required by WPS
- Check if all information are transferred such as Heat Number, Spool Number / Tag Number, Welder Stamp Number
- Before welding ensured all applicable code requirement had been adhere to. Also during and after welding process. Check portable electrode oven (Quiver
- To inspect weldments and request for defect rectification by using yellow marker and re-inspect if required. Prepare weld visual inspection report.
- Prepare NDE request for joints which have been visually accepted as required by the NDE plan and monitoring the status
- Submit the overlay of repair weld to welding supervisor
- Established the HSE activities on inspection activities

10. April 2006 to July 2006
PT. PROFAB INDONESIA
Position : QC Inspector
Project : 12,5 Calm Buoy Project
Client : PT. INDOTURBINE

Project Description : Construction and testing 12,5 Calm Buoy structure as well as prepared documentation for MDR (Manufacture Data Report), perform any testing and inspection e.g Levelity,strigthness,ovality,pre heat,PWHT, visual welding, and NDT

Job / Responsibilities :
- Witnessing of welder and welding operator qualification test
- Witnessing of welding procedure qualification test
- Monitoring welding activities before and during fabrication are performed as required by WPS
- Before welding ensured all applicable code requirement had been adhere to”. Also during and after welding process. Check portable electrode oven (Quiver
- To inspect weldments and request for defect rectification by using yellow marker and re-inspect if required. Prepare weld visual inspection report.
- Prepare NDE request for joints which have been visually accepted as required by the NDE plan and monitoring the status
- Submit the overlay of repair weld to welding supervisor
- Perform Dimentional Inspection and report
- Perform Levelity and Strightness Inspection
- Prepared All document report such as Daily welding joint report, Material Traceability Report, Welding Map, Fit Up Report, Manufacturing Data Report and welding traceability report
- Established the HSE activities on inspection activities

11. January 2006 to April 2006
PT. PROFAB INDONESIA
Position : QC Inspector
Project : KMZ Project
Client : American Production Loading (APL)

Project Description : Construction and testing 12,5 Calm Buoy structure as well as prepared documentation for MDR (Manufacture Data Report), perform any testing and inspection e.g Levelity,strigthness,ovality,pre heat,PWHT, visual welding, and NDT

Job/Resposibility :
- Witnessing of welder and welding operator qualification test
- Witnessing of welding procedure qualification test
- Monitoring welding activities before and during fabrication are performed as required by WPS
- Before welding ensured all applicable code requirement had been adhere to. Also during and after welding process. Check portable electrode oven (Quiver
- To inspect weldments and request for defect rectification by using yellow marker and re-inspect if required. Prepare weld visual inspection report.
- Prepare NDE request for joints which have been visually accepted as required by the NDE plan and monitoring the status
- Submit the overlay of repair weld to welding supervisor
- Perform Dimentional Inspection and report
- Perform Levelity and Strightness Inspection
- Prepared All document report such as Daily welding joint report, Material Traceability Report, Welding Map, Fit Up Report, Manufacturing Data Report and welding traceability report
- Established the HSE activities on inspection activities

ADDITIONAL ABILITY :
• Can operate Computer Ms. Office, AutoCad
• Can speak in English both written and oral

Similar Resumes

QA/QC Senior Welding Inspector
Indonesia, Batam island, Riau - welder, ndt, inspector, piping, qc, welding, pt,...

Engineer Manufacturing Quality Assurance Engineering
Greendale, WI - inspector, engineer, qa, brian, qc, qa qc,...

Engineer Mechanical Manager Construction Project
Philippines, Cagayan de Oro City, Northern Mindanao - philippines, piping, power plant, saudi, kingdom,...

Engineer Quality Control Management Data Entry
Hudson, NH - hudson, inspector, cnc, civil engineer, engineer,...

Manager Construction Mechanical Inspector Application
United States - inspector, qc, piping, ndt, qa qc, power plant,...

Engineer Project Welding Inspector Quality Mechanical
Indonesia, Batam, Riau Islands - ndt, piping, inspector, welder, welding, batam,...

Inspection
Qatar, Doha - piping, ndt, inspector, welder, qc, qa qc, welding,...

Pipeline Engineer
United States - offshore, es, pipeline, engineer,...

High School Supervisor Technician Technical Quality
India, mednipur(east), WB - ndt, inspector, qc, piping, qa qc, qa,...

Mechanical Experience Quality Control Data Entry
Houston, TX - cnc, hvac, tester, machinist, qc, inspector,...



©2014  PostJobFree.com - Home - Latest Resumes - - Update or Delete my resume