Personal Detail:

Name: Kalpesh Khambhata B.

Birth: 24/02/1983.

Experience: 8 yrs.

Contact No: +65-83062534.

Emailid: joo519@r.postjobfree.com

Marital Statuts: Married

Currently Employed: Invensys Process System(Mumbai).

Current Designation: Senior Project Engineer(DCS)

Current Salary: 7.5 lacs per annum

Expected Salary: 18 lacs per annum

Address : 103/Sai Darbar, Sec-36, Nerul (W)

Navi Mumbai-40076.

Expected Date of Joining: 2 months

Willing to Relocate: Yes

Professional Qualification:

Graduation: B.E. Electronics & Communication (MARCH’2004).

Institute: Dharmsingh Desai Institute of Technology Nadiad. Gujarat.

Training: Related to I/A Hardware, MESH Network, IACC, FoxView/FoxDraw, FF, INFUSION, FSIM, DYNSIM, AIMAT, INSQL HISTORIAN, Workstation Preparation (DAY’0, etc), at Invensys Mumbai.

Summary of Skills:

• Programming and configuration of FOXBORO I/A Series DCS, IACC, INFUSION(IEE), WONDERWARE SCADA (INTOUC), IAS.

• System Configuration for FOXBORO I/A Series DCS. Developing System definition, IA Hardware, etc.

• Installation of various DCS related software’s (Foxboro), Preparing nodes i.e. AW and WP’s (Day’0ing, IACC, FDM, Infusion, QF’s, etc).

• Communicating DCS along with the Historian (AIM* AT) Servers, INSQL Historian.

• Communicating Third Party Devices along with FOXBORO DCS. Serial Interface, Third Party Interface using MODBUS, RS-485, ETHERNET- TCPIP, protocols etc.

• Developing Redundant Networks (MESH, PIN) through high reliability switches from Enterasys like A2, N1, N7 types of Switches. Configuration of the switches, VLAN connectivity, Loop Detection Policies, Firmware Up gradation etc. Net sight Console software for troubleshooting network.

• GPS Time Synchronization of DCS.

• OPC Connectivity with DCS.

• Simulation of DCS Configuration using FSIM, Dynism Simulator.

• Auto Back-uping and Recovery of Server using Symantec Backup Execution Software.

• Known how to troubleshoot high reliability Servers like P91 workstations (DELL), Stratus Servers.

• Configuration of Hardware’s like GCIO Annuncaitors, Soft Annunciators, etc.

• Experience of Panel Building (System, LAN, Marshalling IS, Non-Is, PDB, etc). Preparation of documentation such as Panel GA Drawing, Loop Wiring Diagram, Panel As-built Drawing, FAT and SAT procedure etc.

• Have thorough experience of SCADA (Wonderware-Intouch) , IAS, Communication with different type of protocols like Modbus, Profibus, etc. and also experience of communication with different type of PLC like Schneider, Siemens (S7-300, S7-400, S7-200 etc.), Allen Bradley (SLC-500, PLC-5/25, PLC-5/40, PLC-5/80 etc.), ADAM modules, MOD-30 controllers, Controllers and Recorders (Yokogawa, Honeywell) etc.

• Hands on experience of onsite installation and commissioning activities in projects.

Technical Skills: System/Project Engineering.

• Programming and configuration of FOXBORO I/A Series DCS using IACC & INFUSION(IEE), FOXVIEW FOXDRAW.

• Building MESH Network and PIN Network. Configuration of Switches, Firmware Up- gradation, Troubleshooting Network using Net sight Software, etc.

• System Definition Preparation.

• Installation & Commissioning of DCS Nodes.

• Time Synchronization of DCS.

• Configuration and Installation of AIMAT & INSQL Historian.

• Third-Party Interface with DCS. (Serial Links).

• Simulation of DCS Configuration using FSIM, Dynism Simulator.

• OPC Connectivity with DCS.

• Symantec BACK-UP & Recovery of Servers.

• WonderWare INTOUCH, IAS,FSGATEWAY

Current Employer & Role Details:

Company: Invensys India Pvt. Ltd., Mumbai.

From: 19th March’2007.

To: Till Date.

Position: Senior Project Engineer

Current Project: Saudi Aram Co Total Refinery (SATORP-Saudi Arabia) - Technip (EPC).

Hydro-Cracker Plant, Unsaturated Gas Plant.

- Engineering, IO Allocation, Design of Marshalling & System Cabinets of more than 5000 DCS Hardwired IO’s.

- Software Installations of DCS nodes. (AW & WP).

- Programming, Configuration, Logics for Hydro-Cracker Plant, Unsaturated Gas Plant.

- PRE-FAT done at Invensys Singapore.

- FAT done at Invensys Singapore.

Role: Project Engineering & System Engineering.

Project1: Reliance Industries Limited Jamnagar Export Refinery

Project / DTA Up- Gradation (2 years).

Role: Project Engineering & System Engineering.

Responsibilities :

- Looking after 30 Units like CPP, Aromatics, Crude, VGO, Clean Fuels, Coker, Sulphur, FCC, PRU, Alkylation, Hydrogen, Utilities.

- Installation & Commissioning of Centre Control Room.

- Installation & Commissioning of more than 100 workstation on single network.

- Installation & Commissioning of Server Cabinets and LAN Cabinets, PDB etc.

- Installation & Commissioning and Maintenance of Servers and its Accessories, KVM Installation, and getting it online etc.

- Building MESH & PIN Networks. Trouble shooting & Maintenance of Network.

- Connectivity of 30 PIB’s with Central Control Room.

- Software Installations in Workstations (AW & WP).

- Getting FCP’s online for all the respective PIB’s.

- Letter bug Configuration of ATS and FCP and getting it online.

- Installation and Commissioning of Symmetricom Servers for Time Synch of PIN Network, Time Synch of DCS.

- Maintaining Device Monitors of DCS.

- Installation of Network Servers, for maintaining Network.

- Installation and Commissioning of BACK-UP Server for maintaining AUTO BACK-UP for more than 50 workstations.

- Installation of JUNIPER Firewall.

- Installation and Commissioning of OPC Server.

- Resolving System related issues, like Unable to ack alarm, double fox view screens, env issues, etc.

- Time Synch of Third Party Interface etc.

- System Test.

- FAT & SAT of Systems.

Project2: QATAR-GAS Offshore, Qatar.

- Commissioning of WH6 Platform of Qatar – GAS Offshore plant.

- Resolving some of the Punch Points at WH4, WH5 Platform.

- Start-up Support.

Project3: SOHAR Fertilizer, OMAN.

- Commissioning of Ammonia, UREA Plant.

- Resolving some of the Punch Points at Ammonia, UREA Plant.

- Start-up Support.

Previous Employer1:

Company: SSM InfoTech Solution Pvt. Ltd. Surat

From: 25th DEC’2005

To 15th MARCH’2007

Position: Automation Engineer

Project 1 : ETP Plant commissioning using Wonder ware Industrial

Application Server software, Intouch – RIL, Hazira.

Responsibilities

- PLC Programming.

- SCADA & HMI programming.

- Industrial Application Server Programming.

Project 2 : Commissioning VCPVC plant at IPCL- Baroda.

Responsibilities:

- SCADA & HMI programming, Developing Graphics and Linking.

- Installation & Configuration of MTL MUX and Interface using MODBUS protocol.

- Communicating FOXBORO Controllers, Honeywell and YOKOGAWA Recorders with HMI.

Previous Employer2:

Company: Newtronic Equipment Company Pvt. Ltd. (Baroda Branch)

From: 1st JULY’2004

To: 20th DEC’2005

Position: Service Engineer

Responsibilities:

- Installation & Commissioning of Humidity Control Ovens, Photoelectric

Chambers, in Pharmaceutical companies Like Torrent, IPCA,

Sunpharma, WockHard, etc.

FAT & SAT of same.

Contact this candidate