Project Welding Inspector
Resume:
Mohd Zaidi Mohamed
Taman Scientex,
817000 Pasir Gudang
Johor, Malaysia.
Contact number : 0060-019-7666015
Email : ioj7l8@r.postjobfree.com
Nric number : 770***-**-****(A3681320)
Nationality : Malaysian
Sex : Male
Religion : Muslim
Race : Malay
Date of birth/Age : 18 April 1977/35 years
Height/Weight : 164CM/70KG
Marital status : Marriage
Language : English and Malay
EDUCATION
2012 : CSWIP 3.2 Senior Welding Inspector
From TWI (SAE)
2012 : CSWIP 3.4 Radiographic Interpretation
From TWI (SAE)
2010 : BGAS Blasting and Painting
From TWI/CIDB
Johor Bahru.
2004 : CSWIP 3.1 Welding Inspector
Register Welding Inspector
From TWI Sungai Buloh (SAE)
2003 : CSWIP 3.0 Visual Welding Inspector
Register Visual Welding Inspector
From TWI Sungai Buloh (SAE)
1999-2002 : General Welding
National Technical Certificate 2 (NTC2)
Institute Technical of Education
Singapore
1999-2002 : Certificate of Traineeship (Welding)
Keppel Shipyard Ltd
51 Pioneer Sector 1
Singapore
1995 - 1998 : Diploma In Mechanical ( Marine Technology )
Universiti Teknologi Malaysia
80900 Johor Baharu, M’sia
COURSE ATTENDED
2012 : Cswip Senior Welding Inspector
The Welding Instituted (S.E.A)
Sungai Buloh, Selangor, Malaysia
2010 : Internal Quality Auditing traning.
HCT SSPC / MMHE
Johor Bahru, Malaysia
: BGAS Blasting and Painting
From TWI/CIDB
Johor Bahru, Malaysia
2007/2012 : Radiographic Interpretation
The Welding Instituted (S.E.A)
Sungai Buloh, Selangor, Malaysia.
2009 : Basic Offshore Safety and Emergency Training including
HUET EBS (OPITO approved)
MSTS, Johor port jetty, Pasir Gudang, Johor, Malaysia
2004 : Welding Inspector-Steel
The Welding Instituted (S.E.A)
Sungai Buloh, Selangor Malaysia.
2003 : Visual Welding Inspector
The Welding Instituted (S.E.A)
Sungai Buloh, Selangor, Malaysia
2003 : Safety Induction Course (Refresher training)
Ministry of Manpower Keppel shipyard Tuas
Accredited Training Provider, Singapore
2000 : Welding Up grading Qualification Test
( Position : 3G, 4G and 6G )
Keppel Shipyard Tuas Training Centre, Singapore.
1999 : Shipyard Safety Induction Course
Ministry of Manpower, Keppel shipyard Tuas
Accredited Training Provider, Singapore
SYNOPSIS EXPERIENCE
Oil and Gas construction industries in onshore and offshore activities. Having experienced and knowledgeable
in Jacket and Topside Offshore installation, Riser offshore installation, Platform Expansion Work,
offshore S Lay pipeline Installation, Deepwater steel fabrication Semisubmersible FPS, Marine repair
and conversion, FPSO conversion, Jacket fabrication, Topside fabrication, Living Quarters fabrication and
Hull fabrication. Overall are involved in QA/QC activities and understanding systems applied. Previous
positions as QA/QC Inspector, Welding Inspector, General Inspector, Senior Structural Inspector as latest
position. These positions were challenge from any doubt appeared and being good motivated, self confident,
ability to plan and organize own work and capability of contributing actively as part of team..
Career knowledge and expertise stated below:
Performed inspection works on welding, Non-Destructive Testing, Destructive Testing, Blasting &
Painting/Coating, material verification, anode inspection and hydrostatic test. Performed in developments of
Welding Procedure such as WPS/PQR/WPQT/WQT in variables welding process selection consumables and
materials. Knowledgeable in Non Destructive Examination, Destructive Testing and techniques applied.
Knowledgeable in review of Project Quality Documents such as Quality Plan, Inspection Test Plan (ITP),
NDE procedures, applicable procedure as required.
EXPERIENCE
14 Sept 2009 Till Dec 2012
Company : Sabah Shell Petroleum Company Limited.
Project : Gumusut Kakap Floating Production System (Deepwater)
Client : Sabah Shell Petroleum Company Limited.
Location : MMHE Pasir Gudaang Johor
Position : Snr Structure Inspector Topsides
1st July 2009 – 9 Sept 2009
Company : Leighton Malaysia.
Project : BEDB SPAM, PLEM System and Onshore /Onshore Pipeline
Client : Brunei Economic and Development Board.
Location : Brunei Methanol Plant, Sg Liang (SPARK)
Position : Welding Inspector
26 Apr 2009 - 26 June 2009
Company : Global Industry Offshore
Project : Chevron 2009 Installation Campaign.
Welding Procedure Qualification Test Procedure
Welder Qualification Test
Client : Chevron Offshore Thailand Limited
Location : CAT Welder and Supply Workshop
Position : QC Inspector
28 April 2007 to 30 Sept 2008
Company : Single Buoy Mooring Inc
Project : Mopustor Tank project
Client : Talisman Energy
Location : MMHE Pasir Gudang Johor
Position : QA/QC Supervisor ( Structural/Piping )
Summary Duties
- Supervise a group of contractor during fabricating, and welding activities.
- Review AFC drawings and contractor shop drawings
- Witness Material Verification Inspection, Consumable Receiving Inspection, Fit-up, visual inspection
- To review Purchase Inquiry Documents (Material Acceptance Certificated)
- Monitor and reviewed NDT report.
- Welder control
- Witness Welder Qualification test
- Witness Welding Procedure Qualification test
- Witness Vacuum test and hardness test.
- Monitor marking and cutting activities
- Witness mechanical test for material and WPQT (Including CTOD test).
- Witness vacuum, air test and PWHT
- Reviewed and Approved Quality procedure.
- Reviewed and Approved Welding Procedure Specification.
- Reviewed and advice site technical Query raised by contractor.
- Reviewed as build drawing.
- Reviewed WQT certificated and welding pass
- Reviewed RT Film
- Anode inspection
- Prepare and monitor punch list items, ensuring they are resolved before
to sail away
- Check and reviewed work pack prior pipe testing at Holland yard
- Compile punch list for carried over job at Holland yard
- Verify all structural and piping ship loose materials prior carried over job
at Holland yard
- Reviewed inspection report including NDE report and welding completion
summary
- Review of hydrostatic test packages for piping systems
- Monitor all safety aspects of the fabrication works
01 Jan 2007 to 26 April 2007
Company : Global Process System Sdn Bhd
Project : Maari ( Fabrication EISR, TRAM and Helideck )
Electrical, Instrument and Swicth Room ( EISR )
Temporary Refuge and Accommodation Module ( TRAM )
Client : OMV & Clough
Location : Transverve Yard, Kampong Acheh, Lumut Perak
Position : General Inspector
Summary Duties
- Supervise a group of contractor during fabricating, and welding activities.
- Material Verification Inspection and report
- Consumable control
- Daily surveillance checks including parameter check, pre-heating and
interpass temperature as per WPS used
- Fit-up inspection, Visual inspection and witness dimensional check ( for major
Structural, piping and secondary structural as per inspection plan)
- Welder control
- Witness Welder Qualification test
- Witness Welding Procedure Qualification test
- Witness Blasting and Painting
- Witness weld repair activities and NDE
- Witness and Inspect Architectural / Insulation inspection
- Monitoring NDT activities.
- Review RT Film
- Preparing and clearing punch list
- Review inspection and NDE report, final package of weld summary and other
Documentation.
- Monitor all safety aspects of the fabrication works
09 Nov to 26 Dec 2006
Company : TL Offsore Sdn Bhd
Project : Installation of 8” Riser at SFJT-E
Installation of 10” Riser at SFJT-E
Installation of 8” Riser at SFJT-B
Installation of 10” Riser at SFJT-B
Client : Sarawak Shell Sdn Bhd / Sabah Shell Sdn Bhd
Location : Offshore at South Furious Field Kota Kinabalu, Sabah
Position : QA/QC Inspector
21 Oct to 08 Nov 2006
Company : TL Offshore Sdn Bhd
Project : Installation of 16” Expansion Spool at SUDP-A
Installation of 8 slot of 32” Conductor Piles,
Client : Petronas Carigali Sdn Bhd
Location : Offshore Sumandak Field
Position : QA/QC Inspector
03 Oct to 17 Oct 2006
Company : Nippon Steel Co.
Project : Installation of Jacket and 42” Jacket Piles
Installation of 8 slot of 36” Conductor Piles,
Installation of Expansion Spool and Boatlanding
Client : PTT Exploration and Production ( PTTEP )
Location : Offshore at Bongkot Field, Songkla Thailand ( Phase 3E)
Position : Welding Inspector
13 Sept to 29 Sept 2006
Company : TL Offshore Sdn Bhd
Project : Installation of 16” Pipeline from SMP-B To SUDP-A
Client : Petronas Carigali Sdn Bhd
Location : Offshore Sumandak and Semarang Field
Position : QA/QC Inspector
26 August – 12 Sept. 2006
Company : TL Offshore Sdn Bhd
Project : Lifting of 4 leg jacket ( SFJT-E )
Installation of Jacket and 42” Jacket Piles
Installation of 6 slot of 36” Conductor Piles,
Installation of Boatlanding, Riser Guard and Conductor Guard
Client : Sarawak Shell Sdn Bhd / Sabah Shell Sdn Bhd
Location : Offshore at South Furious Field Kota Kinabalu, Sabah
Position : QA/QC Inspector
22 July 2006- 25 August 2006
Company : TL Offshore Sdn Bhd
Project : Lunching of 4 leg jacket ( SUDP-A )
Installation of Jacket and 60” Jacket Piles
Installation of 28 slot of 28” Conductor Piles and Boatlanding
Client : Petronas Carigali Sdn Bhd
Location : Offshore at Sumandak Field Wilayah Persekutuan Labuan.
Position : QA/QC Inspector
1 Jun 2006 to 15 July 2006
Company : TL Offshore Sdn Bhd
Project : SUDP-A to SMP-B Pipeline and Riser ( Sumandak Field )
Welding Procedure Qualification Test Procedure
Welder Qualification Test
Client : Petronas Carigali Sdn Bhd
Location : Crest Marine Base, Pasir Gudang Johor
Position : Welding Inspector
WPQTP for: 16ӯ x 14.3mm WT for pipeline from SUDP-A to SMP-B
16ӯ x 14.3mm WT for riser at SUDP-A and SMP-B
WQT for: 16ӯ x 14.3mm WT for pipeline from SUDP-A to SMP-B
16ӯ x 14.3mm WT for riser at SUDP-A and SMP-B
Company : TL Offshore Sdn Bhd
Project : SFJT-B TO SFJT-E Pipeline and Riser ( South Furious Field )
Welding Procedure Qualification Test
Welder Qualification Test
Client : Sarawak Shell Berhad ( SSB )
Location : Crest Marine Base, Pasir Gudang Johor
Position : Welding Inspector
WPQTP for: 10ӯ x 12.7mm WT for pipeline from SFJT-B TO SFJT-E
10ӯ x 12.7mm WT for riser at SFJT-B and SFJT-E
WQT for 10ӯ x 12.7mm WT for pipeline from SFJT-B TO SFJT-E
10ӯ x 12.7mm WT for riser at SFJT-B and SFJT-E
16 May to 27 May 2006
Company : Nippon Steel Co
Project : Offshore Sealine, Dog-leg and Riser
Welding Procedure Qualification Test
Welder Qualification Test.
Bongkot Field Development Project Phase 3E
Client : PTT Exploration and Production ( PTTEP )
Location : PAE Yard Singapore
Position : Welding Inspector
WPQT for: 14ӯ x 19.1mm WT for pipeline from WP16 РSPP
14ӯ x 19.1mm WT for riser and dog leg from WP16 РSPP platform
10ӯ x 18.3mm WT for pipeline from WP15 РWP16
10ӯ x 18.3mm WT for riser, dog leg & tie in from WP15 РWP16 platform
10ӯ x 18.3mm WT for pipeline from WP17 РWP6
10ӯ x 18.3mm WT for riser, dog leg & tie in from WP17 РWP6 platform
9 April to 10 May 2006
Company : Nippon Steel Co
Project : Installation of 16” Pipeline from AWP4 to APP ( 3.5km )
Installation of 16” Pipeline from AWP3 to APP ( 3.3km )
Client : PTT Exploration and Production ( PTTEP )
Location : Offshore at Arthic Field, Songkhla, Thailand
Position : Welding Inspector
1 Nov 2005- 5 April 2006
Company : TL Offshore Sdn Bhd
Project : Lunching of 6 leg jacket ( BAKP-B )
Installation of Jacket, Jacket Piles, MSF, Module, Bridge
Installation 6” and 16” Riser ( BAKP-B )
Installation of Top side and conductor piles ( BAJT-H )
Installation of 16” Pipeline from BAP-AA to MCOT (31.26km)
Installation of 10” Pipeline from BAP-AA to BADP-G (10km)
Client : Petronas Carigali Sdn Bhd
Location : Offshore at Baram Field Miri, Sarawak
Position : QA/QC Inspector
Company : TL Offsore Sdn Bhd
Project : Installation of 28” riser E8DR-A
Installation of 28” riser E11P-B
Client : Sarawak Shell Bhd
Location : Offshore at E8 and E11 Field Bintulu, Sarawak
Position : QA/QC Inspector
Summary Duties from Nov 2005- Dec 2006
JACKET, JACKET PILES, CONDUCTOR PILES, TOPSIDE, RISER AND EXPANSION SPOOL INSTALLATION
: - Supervise a group of fitters and welders during fabricating and welding
activities.
- Consumable control
- Daily surveillance checks including parameter check, pre-heating and interpass temperature as per WPS used
- To Calibrate all welding machine, quiver and oven.
- Fit-up inspection, Visual inspection
- Prepare seam orientation for jacket piles and conductor piles
- Welder control
- Monitoring NDT activities.
- Prepare inspection report, final report weld summary and other documentation.
WPQT : - Monitoring the running of weld procedures
- Fit-up inspection, Visual inspection as per propose WPS
- Pre-heating and interpass temperature as per propose WPS
- Monitoring NDT activities.
- Prepare run sheet, PQR, WPS and other documentation.
WQT : - Monitoring the running of Welder Test
- Visual inspection
- Monitoring NDT activities.
- Prepare welder list, Summary list, Welder Cert
PIPELAYING
: - Supervise a group of fitters and welders during Pipe laying
- To Calibrate all welding machine, quiver and oven.
- Consumable control
- Daily surveillance checks including parameter check, pre-heating and interpass temperature as per WPS used
- To Check condition of pipe such as internal cleaning, coating, anode spacing sequence and color-coding.
- To check pipe tally and sequence such as pipe no., Heat no., length and thickness of pipe and record all data.
- To Check Beveling such as bevel angle and root face if manual welding process
- To Check Beveling machine such as bevel angle and root face for J groove if automatic welding process
- Fit-up inspection, Visual inspection
- Welder control
- Monitoring NDT activities.
- To counter check on RT Film
- To check coating application ( Raychem, M-30, Mastic fill or Form Type )
- To witness Holiday test on coating
- Prepare inspection report, final report weld summary and other documentation.
Jan 2005-Oct 2005
Company : Malaysian Shipyard and Engineering Sdn Bhd
Project : Otway Gas Project ( Fabrication Jacket, Jacket Piles and Conductor Piles)
Client : Technip Geoproduction for Woodside Energy
Location : Malaysian Shipyard and Engineering Sdn Bhd
Position : Structural Welding Inspector
August 2004 – December 2004
Company : Malaysian Shipyard and Engineering Sdn Bhd
Project : GN Jacket (Fabrication Jacket, Jacket Piles and Conductor Piles)
Client : Technip Geoproduction for Exxon Mobil (MPN)
Location : Malaysian Shipyard and Engineering Sdn Bhd
Position : Structural Welding Inspector
Summary Duties from Aug 2004- Oct 2005
FABRICATION OF JACKET, JACKET PILES, CONDUCTOR PILES
- Supervise a group of contractor during fabricating, and welding activities.
- Material Verification Inspection and report
- Witness Welding Procedure Qualification Test.
- Prepare register for production test as per material and WPS used.
- Witness and monitor Production Test Coupon.
- Witness Welder Qualification test
- Witness and monitor Rolling Can Fabrication.
- Consumable control
- Daily surveillance checks including parameter check, pre-heating and
interpass temperature as per WPS used
- Monitoring tubular manufacturing in pipe mill
- Fit-up inspection, Visual inspection and witness dimensional check ( for major
Structural and secondary structural as per inspection plan)
- Witness Positive Material Inspection ( PMI Test ) and hardness test.
- Witness leak test, air test and hydro test.
- Witness Post Weld Heat Treatment
- Welder control
- Monitoring NDT activities.
- Preparing and clearing punch list
- Prepare final report weld summary and other documentation.
- Monitor all safety aspects of the fabrication works
Jan 2003- Jun 2004
Company : Keppel Shipyard Ltd
Project : Project West Alliance ( Fabrication Drilling Barge )
Client : Smedvig
Location : Keppel Shipyard Ltd, Singapore
Position : QC Inspector Structure/Piping
Apr 2002- Dec 2002
Company : Keppel Shipyard Ltd.
Project : Project FPSO Eagle “Serpentina” ( Fabrication Turret )
Client : Single Buoy Mooring Inc. ( SBM ) for Exxon Mobil
Location : Keppel Shipyard Ltd, Singapore
Position : QC Inspector structural and piping ( Turret )
July 2001- Mar 2002
Company : Keppel Shipyard Ltd
Project : Project FPSO Falcon ( Fabrication Turret )
Client : Single Buoy Mooring Inc ( SBM ) for Exxon Mobil
Location : Keppel Shipyard Ltd, Singapore
Position : QC Inspector structural and piping ( Turret )
Dec. 2000 - Jun 2001
Company : Keppel Shipyard Ltd
Project : Project FPSO White Sea ( Fabrication Turret )
Client : Nortran Offshore
Location : Keppel Shipyard Ltd, Singapore
Position : QC Inspector structural and piping ( Turret )
Apr. 1999-Nov 2000
Company : Keppel Shipyard Ltd
Project : Project FPO Pioneer Spirit “Karata Spirit” ( Conversion )
Client : Teekey Co.
Location : Keppel Shipyard Ltd, Singapore
Position : QC Inspector structural and piping
Summary Duties from Apr 1999- Jun 2004
- Supervise a group of contractor and employee during fabricating, dimension
control, welding procedure and welding activities.
- Material Verification inspection
- Witness Welder Qualification test
- Witness welding procedure Qualification test.
- Piping and Structural Fit-up inspection
- Consumables control
- Welder control
- Witness pre heat and post heat.
- Piping and Structural visual inspection as per inspection plan
- Dimension inspection
- Access ship owner, superintendence and surveyor during inspection.
- Witness heavy lifting
- Witness load test, vacuum and air test.
- Arrange and control NDT activities.
- Weld-map preparation
- Prepare final documentation and trace ability.
- Monitor all safety aspects of the fabrication works
Technical Knowledge
: - Knowledge in shipbuilding and conversion.
- Knowledge of engineering profile.
- Able to reads technical drawing
- Knowledge of international codes and standards practices
- Able to maintaining, service and overhaul Diesel and petrol engine
- Able to service and overhaul all type of valve such as globe, gate, butterfly,
ball, safety, relief, swing check valve and etc.
- Able to service and overhaul pump such as reciprocating pump, centrifugal
pump, vane pump, gear pump, lube pump and etc.
- Able to do dimension control, alignment of coupling straightness of shaft and
spindle, and level check by using dumpy level, lesser light, dial gauge, piano
wire and water level method.
- Able to service and overhaul compress air single and double stage.
- Knowledgeable in deck machinery such as winch, anchor windless and etc.
- Able to used precision measurement equipment such as micrometer (inside and
outside) vernier caliper, dial gauge indicator.
- Awareness and understanding of safety requirements on offshore platforms and
onshore facilities
NDT Knowledge
- Color check
- Magnetic particle test
- Basic in Ultrasonic
- Interpretation of radiographic
- Positive Material inspection
- Hardness test
Welding Skill
- Shielded Metal Arc Welding up to 6GR position
- Metal Inertia Gas
- Submerse Arc Welding
- Breezing ( Gas Welding )
- Air arc carbon gouging
- Oxy-acetylene cutting by manual and automatic
Computer Skill
- Microsoft office, AutoCAD
Contact this candidate