CURRICULUM VITAE
A. Personal Information
Name : Jerry Ceppy Simanjuntak
Gender : Male
Place/ date of birth : Batam, 18 June 1980
Nationality : Indonesian
Marital status : Single
Passport Number : P 710229
ID Card No : 21.71.09.004.18.06.80.17638
Driving License Number : 800*********
Driving License : Four wheel Drive & Two wheel Drive
Address : Bengkong Tengah Jl Jawa No. 15
Batam – Indonesia 29432
Phone : Mobile +628**********
Email : i7bh9q@r.postjobfree.com
B. Formal Education
Bachelor Degree of Mechanical Engineering (GPA 3.09 of 4.00 scale)
Engineering Department of Gadjah Mada University, Indonesia (2005)
C. Qualification
• CSWIP – 3.1 Cert. No: 48837 : Welding Inspector
• PCN RI – Lev. 2 Cert. No: A011S3622639 : Radiographic Film Interpreter
• CSWIP – 3.0 Cert. No: 38607 : Visual Welding Inspection
• WI-BNSP Cert. No: 03.0010679 : Welding Inspector
• ASNT MT Level 2 Cert. No: AINDT-MT-0004 : Magnetic Test
• ASNT PT Level 2 Cert. No: AINDT-PT-0004 : Penetrant Test
• Piping Inspector Cert. No: BTI.03.09.PP.805 : Piping Process ASME B31.3
• Certified Supervisor Cert. No: EL/QMS/023/KK : Supervisory
D. Training & Seminar
• April 19 to 23, 2010 : Welding Inspector CSWIP 3.1 – TWI SEA.
• March 23 to 27, 2009 : Welding Inspector CSWIP 3.0 – TWI SEA.
• Feb 28 to March 13, 2009 : Piping ASME B31.3 – Offshore Training Institute, Batam.
• Jan 13, 2010 : Safe Work at height utilizing IRATA – GBP, Batam.
• May 24 to 29, 2010 : Radiographic Interpreter PCN L2 – MINDT-Batam.
• Jan 03 to Jan 17, 2011 : Liquid Penetrant Test ASNT L II – AINDT-Batam.
• Jan 18 to Feb 03, 2011 : Magnetic Particle Test ASNT L II – AINDT-Batam.
• February 18, 2010 : Quality Awareness Programme – In-house PTMI.
• May to Aug 2009 : Welding Inspector BNSP – UINDT, Batam.
• Sept 23 to 25, 2007 : Advanced welding technology all process – In-house PTBWI.
• Augt 23 to 27, 2008 : Supervisory Training – ICQ UK & IET UK, Batam
• Augt 3, 2011 : Hardness Test, McDermott Batam
• September 13, 2011 : Quarantine Training, McDermott Batam
• September 13, 2011 : IIF (incident Injury Free) & FSI Training, McDermott Batam
• Functional Testing for Instrument Fittings - Pneumatic Testing, Hydro testing (McDermott, Batam).
• Corrosion protection & Coating application and testing (McDermott, Batam).
• EDSA training (Gadjah Mada Univeristy, Yogyakarta).
• Design of Ionic Accelerator Training (OJT-National Atomic Power Coorporation, Yogyakarta)
E. Summary of Experience
Almost 6 years experience in the Fabrication / Engineering & Welding industry and Manufacturing. Extensive experience gained in Major Onshore and Offshore Project Platform (Jacket & Decks) Piping, Structural, Modification and Modules. Coordinating all inspection activities being undertaken in their allocated area and ensuring all persons involved are aware of quality requirements. Good working knowledge of: International construction codes & Standards (AWS D1.1, ASME V, ASME IX, ASME B31.3, API 1104, API RP 2A, ASTM, NORSOK) for the oil & gas industry, project contracts, construction & quality procedures, construction drawings, piping isometrics & P & I.D’s.
1. Project : KJVG, Gorgon Barrow Island LNG Project, PAR & PAU
Company : McDermott Indonesia
Position : QA/QC Inspector (Piping)
Periods : July 2011 – Hitherto
Location : Batam - Kepri, Indonesia
Duties :
• Conduct meeting with PMT, the client & 3rd party inspection agencies (if any) on each project if any different interpretation to the specification, to resolve issues.
• Check & ensure that end preparation prior to welding as per approved welding procedures, Quality Control procedures, NDT procedures, Codes; standards are available at work site.
• Check that all applicable equipments related to welding are calibrated and has valid certification.
• Check & ensure that welding processes in the work station are carried out in accordance with approved procedures, specification & Inspection and confirmation of welding consumables as per the specifications.
• Witness & inspection of all Welding activity, Review of Inspection Documents & Has the authority to reject defective work.
• Ensuring that Fabrication Operations are monitored to ensure compliance with specified and approved measures.
• Reviewed Material certificate and verified the pipes, plates, bolt, nuts, fittings, valves, fire protection items, sockolets, and threadolets for fabrication, welding consumables and base materials.
• Witnessed welding activities, NDT activities, Pneumatic Test and Hydro test, PWHT activities.
• Daily Welding consumable audit.
• Weekly spot welding audit for CRA materials. Ensuring that non-destructive testing is performed in a timely manner and material traceability is recorded and submitted progressively to the certification section.
• Review and verify completion of Computerize Inspection Request (CIR) for the fabrication of piping process and PWHT Chart/Report.
• When deemed essential, review radiographic film interpretation in the dark room if yard NDT coordinators are not available or on vacation.
2. Project : Woodside Energy Limited, NRB Project, Bridge, Primary &Insert Piles
Company : McDermott Indonesia
Position : QA/QC Inspector (Structural)
Periods : January 2011 – July 2011
Location : Batam - Kepri, Indonesia
Duties :
• Ensured effectiveness and timely execution of the activities defined in the project inspection and test plan.
• Ensuring compilation of all final documentation & in-process inspection records in a timely manner with the best in class productivity.
• Ensuring that Fabrication Operations are monitored & coordinated to ensure compliance with specified and approved measures, thru’ project quality team & NDT coordinator. Verified the base materials and consumable welding materials and conformed Welding activities.
• Verified the welding equipment capability to meet the applicable requirements of the welding procedure.
• Verified welder’s qualification record.
• Verified documentation of performance qualification test results.
• Verified the joint geometry meet the requirements of the welding procedures and drawings.
• Performed the required visual examinations, before welding, during welding, after welding.
• Requested NDT examinations those are required. Perform visual inspection to all complete welded joint, carry out NDT as per requirement on NDT drawing and witness NDT activity.
• Follow up and record all TQ, SQ, and all welding result. Maintain material traceability record.
• Daily Welding consumable audit.
• Weekly spot welding audit.
3. Project : Esso, Kipper Tuna Turum Project, CPPs (M1, M2A, M2B and M3)
Company : McDermott Indonesia
Position : QA/QC Inspector (Piping)
Periods : July 2009 – January 2011
Location : Batam - Kepri, Indonesia
Duties :
• Monitor joint preparation are meet requirement on fabrication drawing.
• Ensure WPS use and welder was qualified to perform production weld, monitor welding parameter during welding as per WPS use.
• Make sure all welding consumable use, storage and handling are meet written procedure.
• Carried out internal discoloration of pipes using boroscope (with 3rd party inspection) as per discoloration accepetance criteria.
• Carried out internal cleanliness of pipes using boroscope (with 3rd party inspection) as per cleanliness matrix accepetance criteria.
• Carried out external visual and NDT inspection surveys of piping and structural as per Inspection program.
• Carried out internal discoloration of pipes using boroscope (with 3rd party inspection) as per discoloration accepetance criteria.
• Carried out internal cleanliness of pipes using boroscope (with 3rd party inspection) as per cleanliness matrix accepetance criteria.
• Perform visual inspection to all complete welded joint, carry out NDT as per requirement on NDT drawing and witness NDT activity.
• Follow up and record all TQ, SQ, and all welding result. Maintain material traceability record.
• Interact with fabrication project team for progress, project problem and interpretation of specification.
• Witness a welder qualification test Review fabrication procedure, NDT drawing, WPS register, welder register, specification and all supporting document.
• Daily Welding consumable audit.
• Weekly spot welding audit for CRA materials.
4. Project : Chevron Thailand, Platong gas II Project
Company : McDermott Indonesia
Position : QA/QC Inspector (Structural)
Periods : February 2008 – July 2009
Location : Batam - Kepri, Indonesia
Duties :
• Monitor joint preparation are meet requirement on fabrication drawing.
• Ensure WPS use and welder was qualified to perform production weld, monitor welding parameter during welding as per WPS use.
• Make sure all welding consumable use, storage and handling are meet written procedure.
• Perform visual inspection to all complete welded joint, carry out NDT as per requirement on NDT drawing and witness NDT activity.
• Follow up and record all TQ, SQ, and all welding result. Maintain material traceability record.
• Interact with fabrication project team for progress, project problem and interpretation of specification.
• Witness a welder qualification test Review fabrication procedure, NDT drawing, WPS register, welder register, specification and all supporting document. Verified the welding equipment capability to meet the applicable requirements of the welding procedure.
• Verified documentation of performance qualification test results.
• Supervised performing Repair of welds those are defective.
5. Project : Woodside Energy Ltd - Phase V
Company : McDermott Indonesia
Position : QA/QC Inspector (Structural)
Periods : January 2007 – February 2008
Location : Batam - Kepri, Indonesia
Duties :
• Monitor joint preparation are meet requirement on fabrication drawing.
• Ensure WPS use and welder was qualified to perform production weld, monitor welding parameter during welding as per WPS use.
• Make sure all welding consumable use, storage and handling are meet written procedure.
• Perform visual inspection to all complete welded joint, carry out NDT as per requirement on NDT drawing and witness NDT activity.
• Follow up and record all TQ, SQ, and all welding result. Maintain material traceability record.
• Interact with fabrication project team for progress, project problem and interpretation of specification.
• Witness a welder qualification test Review fabrication procedure, NDT drawing, WPS register, welder register, specification and all supporting document.
• Verified the welding equipment capability to meet the applicable requirements of the welding procedure.
• Verified documentation of performance qualification test results.
• Supervised performing Repair of welds those are defective.
• Executed the welding procedure qualifications and welder performance qualifications.
6. Project : PTT Arthit Thailand, Central Processing Platform
Company : McDermott Indonesia
Position : QA/QC Inspector (Structural)
Periods : March 2006 – January 2007
Location : Batam - Kepri, Indonesia
Duties :
• Monitor joint preparation are meet requirement on fabrication drawing.
• Ensure WPS use and welder was qualified to perform production weld, monitor welding parameter during welding as per WPS use.
• Make sure all welding consumable use, storage and handling are meet written procedure.
• Perform visual inspection to all complete welded joint, carry out NDT as per requirement on NDT drawing and witness NDT activity.
• Follow up and record all TQ, SQ, and all welding result. Maintain material traceability record.
• Interact with fabrication project team for progress, project problem and interpretation of specification.
• Witness a welder qualification test Review fabrication procedure, NDT drawing, WPS register, welder register, specification and all supporting document.
• Daily Welding consumable audit.
• Weekly spot welding audit.