Mechanical High School
Resume:
=***** peaceful ln.
Locust n.c. *****
Mark Blalock
hx914d@r.postjobfree.com
OBJECTIVE:
To find a great work place that will not only challenge me as an individual, but one in which I can grow and become an even stronger member of the team; not only enhancing my skills but my team members as well. I have 26 years of manufacturing experience which I think will be a great asset to any company.
EXPERIENCE:
.PACTIV CORP.
6-09 / PRESENT
CDP Tech
SETTINUP AND OPERATING A DAVIS / TSL THERMOFORMING
EXTRUDERS , FORMERS AND TRIM PRESS
WORKING WITH MATERIALS SUCH AS
HIPPS, PET ETC. SUPERVISING 5/15 EMPLOYEES PER SHIFT
SETTINUP DJS BAGGERS
• CONVERPRO (8/07-4/09)
550 East Fifth St.
Oakboro, NC 28129
• Running and settingup, trouble shooting any mechanical or technical
• Problems which would arrive on a paper converting machine called the “Hobema” which is a German made machine. It has the capability to run in upwards 1300 to 1400 pieces per minute depending upon the specific order requirements of the setup.
• Engine Power Source (2/06-6/07)
220 Olympic St.
Charlotte, NC 28273
• Boring and honing engine blocks on a vertical rottler boring machine and hone
• Disassembling engine blocks
• Smart Belt Conveyor (5/05-2/06)
106 Conveyor Beltway Dr.
Stanfield, NC 28163
• Mechanical assembly/machinist
• Building custom conveyors per print
• Making parts via prints to customize the indexer, stacker, etc.
• All this done on an engine lathe, mille, drill press, etc.
• Altering parts that were ordered to fit the unit being built
• drilling and tapping stainless steel, etc.
• Boston Gear (1/03-5/05)
701 Carrier Dr.
Charlotte, NC 28216
• Mechanical assembly/warranty and repair technician
• Repair work on warranted gear boxes and speed reducers per customer complaint
• Troubleshooting incoming technical problems
• Customer interface and service
• Data entry tracking of all services
• Credit tracking for warranty work
• Mount Hope Machinery [3/00-2/02
2000 Donald Ross Rd.
Charlotte, NC 28208
• Machinist and mechanical assembly
• Member of safety team
• Built rolls for paper and fabric industry
• Order steel stock for rolls
• Mille keyways in 2 ”– 10 ” in diameter axle stock
• Threading, splitting, and drilling tube flutes for axles and axle ends
• Built bracket stands, selvage uncurlers, precision pullers, and guiders all built from blueprints, stockroom assistant
• Pulled parts for orders and staged in holding area for ordered jobs
• Shipping for UPS-Pulled parts per shop order packaged and shipped orders
• General Latex (2/97-3/00)
2321 N. Davidson St.
Charlotte, NC 28205
• Shipping and Receiving Foreman
• Managing the daily employee duties
• Staging for incoming and outgoing materials
• Loading and unloading bulk tanks i.e. Tanker trucks, RR. Tankers, etc.
• QC checks for sample materials
• Managed inventory on hold tanks and raw materials as well as stock inventory
• Mixed chemical batches in reactors, mixers by the quart or up to fifty gallon drums per batch sheet instructions
• Working with chemicals such as formaldehyde, ammonia, caustic potash, etc. which all require the use of respirators, gloves, apron, etc.
• Also would do milling for certain batches to get the right density and granular structure for certain powders to go into the batch
• Completed batch adjustment per QC and loaded into drums, tankers, tote bins, etc. for shipment
• Advel Cherry Textron (4/93-2/97)
614 NC Hwy. 200
Stanfield, NC 28163
• Level III Machinist/Setup Operator
• Setup of Nakishamada machines to make rivets which is a coil fed header
• Completion of changeovers
• Adjustments of Micro switches, Cams, and Gibbs
• Setup of tolerances on impact machinery to create custom timing for insertions and extractions
• Tool Room Tech-Made and reworked tooling on various machinery
• Worked with several Bridgeport lathes, mills, and surface grinders,
• etc.
. Performed routine maintenance on die sets as well as trouble
shooting in process mechanical problems .
• Metal Forge Company (3/86-2/93)
1600 Woodhurst Ln.
Albemarle, NC 28001
• 2nd Shift Supervisor
• Overseeing the daily manufacturing operations
• QC Lab Tech/Setup Operator
• First piece inspections
• Setup of hot and cold headers, punch pressers, stamping presses w/ vertical and horizontal rams i.e. Verson, Doall, Eumoco, Lyland, and Amada Punch Press, all in which are coil fed
• Completed QC checks of various parts manufactured off all machinery for insurance of SPC compliance
• Checked in steel to check carbon contents for compliance of company specifications
• Hydraulics, sensors replacing splines on various machines, lined up the timing on the walking beams and die beds etc. adjusted sensors
• Adjusted TIR to comply with specifications per blue prints
•
• Worked with various Mics, Calipers, Height gages, Optical comparator
• Compiled statistics to formulate the upper and lower control limits on SPC charts
• Took out and did complete change overs to run parts to company specifications.
• Setup and operated draw and cut machines to run several different stock lengths and sizes
Accomplishments:
• High School graduate
• Nakishamada Certification
• Fork Lift Certified
• Level III Magnetic Particle Technician
• Member of the Red Cross First Responders First Aid Team
=26962 peaceful ln.
Locust n.c. 28097
Mark Blalock
hx914d@r.postjobfree.com
OBJECTIVE:
To find a great work place that will not only challenge me as an individual, but one in which I can grow and become an even stronger member of the team; not only enhancing my skills but my team members as well. I have 26 years of manufacturing experience which I think will be a great asset to any company.
EXPERIENCE:
.PACTIV CORP.
6-09 / PRESENT
CDP Tech
SETTINUP AND OPERATING A DAVIS / TSL THERMOFORMING
EXTRUDERS , FORMERS AND TRIM PRESS
WORKING WITH MATERIALS SUCH AS
HIPPS, PET ETC. SUPERVISING 5/15 EMPLOYEES PER SHIFT
SETTINUP DJS BAGGERS
• CONVERPRO (8/07-4/09)
550 East Fifth St.
Oakboro, NC 28129
• Running and settingup, trouble shooting any mechanical or technical
• Problems which would arrive on a paper converting machine called the “Hobema” which is a German made machine. It has the capability to run in upwards 1300 to 1400 pieces per minute depending upon the specific order requirements of the setup.
• Engine Power Source (2/06-6/07)
220 Olympic St.
Charlotte, NC 28273
• Boring and honing engine blocks on a vertical rottler boring machine and hone
• Disassembling engine blocks
• Smart Belt Conveyor (5/05-2/06)
106 Conveyor Beltway Dr.
Stanfield, NC 28163
• Mechanical assembly/machinist
• Building custom conveyors per print
• Making parts via prints to customize the indexer, stacker, etc.
• All this done on an engine lathe, mille, drill press, etc.
• Altering parts that were ordered to fit the unit being built
• drilling and tapping stainless steel, etc.
• Boston Gear (1/03-5/05)
701 Carrier Dr.
Charlotte, NC 28216
• Mechanical assembly/warranty and repair technician
• Repair work on warranted gear boxes and speed reducers per customer complaint
• Troubleshooting incoming technical problems
• Customer interface and service
• Data entry tracking of all services
• Credit tracking for warranty work
• Mount Hope Machinery [3/00-2/02
2000 Donald Ross Rd.
Charlotte, NC 28208
• Machinist and mechanical assembly
• Member of safety team
• Built rolls for paper and fabric industry
• Order steel stock for rolls
• Mille keyways in 2 ”– 10 ” in diameter axle stock
• Threading, splitting, and drilling tube flutes for axles and axle ends
• Built bracket stands, selvage uncurlers, precision pullers, and guiders all built from blueprints, stockroom assistant
• Pulled parts for orders and staged in holding area for ordered jobs
• Shipping for UPS-Pulled parts per shop order packaged and shipped orders
• General Latex (2/97-3/00)
2321 N. Davidson St.
Charlotte, NC 28205
• Shipping and Receiving Foreman
• Managing the daily employee duties
• Staging for incoming and outgoing materials
• Loading and unloading bulk tanks i.e. Tanker trucks, RR. Tankers, etc.
• QC checks for sample materials
• Managed inventory on hold tanks and raw materials as well as stock inventory
• Mixed chemical batches in reactors, mixers by the quart or up to fifty gallon drums per batch sheet instructions
• Working with chemicals such as formaldehyde, ammonia, caustic potash, etc. which all require the use of respirators, gloves, apron, etc.
• Also would do milling for certain batches to get the right density and granular structure for certain powders to go into the batch
• Completed batch adjustment per QC and loaded into drums, tankers, tote bins, etc. for shipment
• Advel Cherry Textron (4/93-2/97)
614 NC Hwy. 200
Stanfield, NC 28163
• Level III Machinist/Setup Operator
• Setup of Nakishamada machines to make rivets which is a coil fed header
• Completion of changeovers
• Adjustments of Micro switches, Cams, and Gibbs
• Setup of tolerances on impact machinery to create custom timing for insertions and extractions
• Tool Room Tech-Made and reworked tooling on various machinery
• Worked with several Bridgeport lathes, mills, and surface grinders,
• etc.
. Performed routine maintenance on die sets as well as trouble
shooting in process mechanical problems .
• Metal Forge Company (3/86-2/93)
1600 Woodhurst Ln.
Albemarle, NC 28001
• 2nd Shift Supervisor
• Overseeing the daily manufacturing operations
• QC Lab Tech/Setup Operator
• First piece inspections
• Setup of hot and cold headers, punch pressers, stamping presses w/ vertical and horizontal rams i.e. Verson, Doall, Eumoco, Lyland, and Amada Punch Press, all in which are coil fed
• Completed QC checks of various parts manufactured off all machinery for insurance of SPC compliance
• Checked in steel to check carbon contents for compliance of company specifications
• Hydraulics, sensors replacing splines on various machines, lined up the timing on the walking beams and die beds etc. adjusted sensors
• Adjusted TIR to comply with specifications per blue prints
•
• Worked with various Mics, Calipers, Height gages, Optical comparator
• Compiled statistics to formulate the upper and lower control limits on SPC charts
• Took out and did complete change overs to run parts to company specifications.
• Setup and operated draw and cut machines to run several different stock lengths and sizes
Accomplishments:
• High School graduate
• Nakishamada Certification
• Fork Lift Certified
• Level III Magnetic Particle Technician
• Member of the Red Cross First Responders First Aid Team
=26962 peaceful ln.
Locust n.c. 28097
Mark Blalock
hx914d@r.postjobfree.com
OBJECTIVE:
To find a great work place that will not only challenge me as an individual, but one in which I can grow and become an even stronger member of the team; not only enhancing my skills but my team members as well. I have 26 years of manufacturing experience which I think will be a great asset to any company.
EXPERIENCE:
.PACTIV CORP.
6-09 / PRESENT
CDP Tech
SETTINUP AND OPERATING A DAVIS / TSL THERMOFORMING
EXTRUDERS , FORMERS AND TRIM PRESS
WORKING WITH MATERIALS SUCH AS
HIPPS, PET ETC. SUPERVISING 5/15 EMPLOYEES PER SHIFT
SETTINUP DJS BAGGERS
• CONVERPRO (8/07-4/09)
550 East Fifth St.
Oakboro, NC 28129
• Running and settingup, trouble shooting any mechanical or technical
• Problems which would arrive on a paper converting machine called the “Hobema” which is a German made machine. It has the capability to run in upwards 1300 to 1400 pieces per minute depending upon the specific order requirements of the setup.
• Engine Power Source (2/06-6/07)
220 Olympic St.
Charlotte, NC 28273
• Boring and honing engine blocks on a vertical rottler boring machine and hone
• Disassembling engine blocks
• Smart Belt Conveyor (5/05-2/06)
106 Conveyor Beltway Dr.
Stanfield, NC 28163
• Mechanical assembly/machinist
• Building custom conveyors per print
• Making parts via prints to customize the indexer, stacker, etc.
• All this done on an engine lathe, mille, drill press, etc.
• Altering parts that were ordered to fit the unit being built
• drilling and tapping stainless steel, etc.
• Boston Gear (1/03-5/05)
701 Carrier Dr.
Charlotte, NC 28216
• Mechanical assembly/warranty and repair technician
• Repair work on warranted gear boxes and speed reducers per customer complaint
• Troubleshooting incoming technical problems
• Customer interface and service
• Data entry tracking of all services
• Credit tracking for warranty work
• Mount Hope Machinery [3/00-2/02
2000 Donald Ross Rd.
Charlotte, NC 28208
• Machinist and mechanical assembly
• Member of safety team
• Built rolls for paper and fabric industry
• Order steel stock for rolls
• Mille keyways in 2 ”– 10 ” in diameter axle stock
• Threading, splitting, and drilling tube flutes for axles and axle ends
• Built bracket stands, selvage uncurlers, precision pullers, and guiders all built from blueprints, stockroom assistant
• Pulled parts for orders and staged in holding area for ordered jobs
• Shipping for UPS-Pulled parts per shop order packaged and shipped orders
• General Latex (2/97-3/00)
2321 N. Davidson St.
Charlotte, NC 28205
• Shipping and Receiving Foreman
• Managing the daily employee duties
• Staging for incoming and outgoing materials
• Loading and unloading bulk tanks i.e. Tanker trucks, RR. Tankers, etc.
• QC checks for sample materials
• Managed inventory on hold tanks and raw materials as well as stock inventory
• Mixed chemical batches in reactors, mixers by the quart or up to fifty gallon drums per batch sheet instructions
• Working with chemicals such as formaldehyde, ammonia, caustic potash, etc. which all require the use of respirators, gloves, apron, etc.
• Also would do milling for certain batches to get the right density and granular structure for certain powders to go into the batch
• Completed batch adjustment per QC and loaded into drums, tankers, tote bins, etc. for shipment
• Advel Cherry Textron (4/93-2/97)
614 NC Hwy. 200
Stanfield, NC 28163
• Level III Machinist/Setup Operator
• Setup of Nakishamada machines to make rivets which is a coil fed header
• Completion of changeovers
• Adjustments of Micro switches, Cams, and Gibbs
• Setup of tolerances on impact machinery to create custom timing for insertions and extractions
• Tool Room Tech-Made and reworked tooling on various machinery
• Worked with several Bridgeport lathes, mills, and surface grinders,
• etc.
. Performed routine maintenance on die sets as well as trouble
shooting in process mechanical problems .
• Metal Forge Company (3/86-2/93)
1600 Woodhurst Ln.
Albemarle, NC 28001
• 2nd Shift Supervisor
• Overseeing the daily manufacturing operations
• QC Lab Tech/Setup Operator
• First piece inspections
• Setup of hot and cold headers, punch pressers, stamping presses w/ vertical and horizontal rams i.e. Verson, Doall, Eumoco, Lyland, and Amada Punch Press, all in which are coil fed
• Completed QC checks of various parts manufactured off all machinery for insurance of SPC compliance
• Checked in steel to check carbon contents for compliance of company specifications
• Hydraulics, sensors replacing splines on various machines, lined up the timing on the walking beams and die beds etc. adjusted sensors
• Adjusted TIR to comply with specifications per blue prints
•
• Worked with various Mics, Calipers, Height gages, Optical comparator
• Compiled statistics to formulate the upper and lower control limits on SPC charts
• Took out and did complete change overs to run parts to company specifications.
• Setup and operated draw and cut machines to run several different stock lengths and sizes
Accomplishments:
• High School graduate
• Nakishamada Certification
• Fork Lift Certified
• Level III Magnetic Particle Technician
• Member of the Red Cross First Responders First Aid Team
Contact this candidate